Flood inundation modeling using MIKE FLOOD and remote sensing data

A coupled 1D-2D hydrodynamic model, MIKE FLOOD was used to simulate the flood inundation extent and flooding depth in the delta region of Mahanadi River basin in India. Initially, the 1D model MIKE 11 was calibrated using river water level and discharge data of various gauging sites for the monsoon period (June to October) of the year 2002. Subsequently, the calibrated set up was validated using both discharge and water level data for the same period of the year 2001. The performance of calibration and validation results of MIKE 11 were evaluated using different performance indices. A bathymetry of the study area with a spatial resolution of 90m was prepared from SRTM DEM and provided as an input to the 2D model, MIKE 21. MIKE 11 and MIKE 21 models were then coupled using lateral links to form the MIKE FLOOD model set up for simulating the two dimensional flood inundations in the study area. Flood inundation is simulated for the year 2001 and the maximum flood inundation extent simulated by the model was compared with the corresponding actual inundated area obtained from IRS-1D WiFS image.     

The IGS VTEC maps: a reliable source of ionospheric information since 1998

The International GNSS Service (IGS) Working Group on Ionosphere was created in 1998. Since then, the Scientific community behind IGS, in particular CODE, ESA, JPL and UPC, have been continuosly contributing to reliable IGS combined vertical total electron content (VTEC) maps in both rapid and final schedules. The details on how these products are being generated, performance numbers, proposed improvement as far as VTEC evolution trends during near one Solar Cycle, are summarized in this paper. The confirmation of (1) the good performance of the IGS combined VTEC maps, and (2) the characteristic VTEC variability periods, are two main results of this work.     

CPLat: first operational experimental processing center for SIRGAS in Argentina

The SIRGAS permanent GPS network which is in fact the IGS network densification for the American continent, consists today of more than 200 stations covering the continent and islands. It is currently processed by the IGS RNAAC SIR centre at Deutsches Geodätisches Forschungsinstitut producing weekly free solutions relying on IGS final orbits and EOP that contribute to the ITRF through IGS. By August 2006, the SIRGAS Working Group I had accepted five proposals for experimental processing centers within the region that would collaborate with IGS RNAAC SIR. One of them, Centro de Procesamiento La Plata (CPLat) in Argentina, began processing 60 stations on October 2006. By January 2007 CPLat reached operational capability, delivering weekly free solution SINEX files, with an internal consistency of 1.5 mm average for the horizontal components, and 3 mm in the vertical. Comparisons with IGS global and IGS RNAAC SIR weekly solutions were taken as external consistency indications, showing average RMS residuals of 1.8, 2.4 and 5 mm for the north, east, and vertical component, respectively. Analysis and comparison of adjusted solution time series from CPLat and other processing centers has proved to be highly valuable for solution QC, namely detection and identification of station anomalous behavior or modelling problems. These procedures will ensure the maintenance of the performance specifications for CPLat solutions. Action is being taken in order to guarantee the continuity of this effort beyond the experimental phase.     

Mapping of suspended sediments using site specific seasonal algorithms

This article reports a preliminary work in which two site specific seasonal algorithms have been proposed for estimating the suspended sediments concentration (SSC) from the digital numbers recorded on Indian Remote sensing Satellite, IRS-P4 Ocean Colour Monitor (OCM) sensor. For estimation of SSC, the proposed algorithms utilize dark pixel deduction atmospheric correction technique. The computations are performed with respect to north east monsoon phase situations of Palk Strait coastal stretch. The algorithms performance was satisfactory during the north east monsoon period. Although the results obtained cannot be generalized, we suggest that the authority of proposed algorithms can be extended to other seasons with the addition of more temporal experimental validation data sets and with numeric constants adjusted to present existing conditions. (As this area was severely affected by Tsunami, it may have dissimilar conditions at present).     

Applications of AnnAGNPS model for soil loss estimation and nutrient loading for Malaysian conditions

The study evaluated the performance and suitability of AnnAGNPS model in assessing runoff, sediment loading and nutrient loading under Malaysian conditions. The watershed of River Kuala Tasik in Malaysia, a combination of two sub-watersheds, was selected as the area of study. The data for the year 2004 was used to calibrate the model and the data for the year 2005 was used for validation purposes. Several input parameters were computed using methods suggested by other researchers and studies carried out in Malaysia. The study shows that runoff was predicted well with an overall R² value of 0.90 and E value of 0.70. Sediment loading was able to produce a moderate result of R² = 0.66 and E = 0.49, nitrogen loading predictions were slightly better with R² = 0.68 and E = 0.53, and phosphorus loading performance was slightly poor with an R² = 0.63 and E = 0.33. The erosion map developed was in agreement with the erosion risk map produced by the Department of Agriculture, Malaysia. Rubber estates and urban areas were found to be the main contributors to soil erosion. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for planning and management of watersheds under Malaysian conditions.     

Using spectral information from the NIR water absorption features for the retrieval of canopy water content

Canopy water content (CWC) is important for mapping and monitoring the condition of the terrestrial ecosystem. Spectral information related to the water absorption features at 970 nm and 1200 nm offers possibilities for deriving information on CWC. In this study, we compare the use of derivative spectra, spectral indices and continuum removal techniques for these regions. Hyperspectral reflectance data representing a range of canopies were simulated using the combined PROSPECT + SAILH model. Best results in estimating CWC were obtained by using spectral derivatives at the slopes of the 970 nm and 1200 nm water absorption features. Real data from two different test sites were analysed. Spectral information at both test sites was obtained with an ASD FieldSpec spectrometer, whereas at the second site HyMap airborne imaging spectrometer data were also acquired. Best results were obtained for the derivative spectra. In order to avoid the potential influence of atmospheric water vapour absorption bands the derivative of the reflectance on the right slope of the canopy water absorption feature at 970 nm can best be used for estimating CWC.     

Evaluation of the geometric stability and the accuracy potential of digital cameras — Comparing mechanical stabilisation versus parameterisation

Recent tests on the geometric stability of several digital cameras that were not designed for photogrammetric applications have shown that the accomplished accuracies in object space are either limited or that the accuracy potential is not exploited to the fullest extent. A total of 72 calibrations were calculated with four different software products for eleven digital camera models with different hardware setups, some with mechanical fixation of one or more parts. The calibration procedure was chosen in accord to a German guideline for evaluation of optical 3D measuring systems [VDI/VDE, VDI/VDE 2634 Part 1, 2002. Optical 3D Measuring Systems–Imaging Systems with Point-by-point Probing. Beuth Verlag, Berlin]. All images were taken with ringflashes which was considered a standard method for close-range photogrammetry. In cases where the flash was mounted to the lens, the force exerted on the lens tube and the camera mount greatly reduced the accomplished accuracy. Mounting the ringflash to the camera instead resulted in a large improvement of accuracy in object space. For standard calibration best accuracies in object space were accomplished with a Canon EOS 5D and a 35 mm Canon lens where the focusing tube was fixed with epoxy (47  μm maximum absolute length measurement error in object space). The fixation of the Canon lens was fairly easy and inexpensive resulting in a sevenfold increase in accuracy compared with the same lens type without modification. A similar accuracy was accomplished with a Nikon D3 when mounting the ringflash to the camera instead of the lens (52  μm maximum absolute length measurement error in object space). Parameterisation of geometric instabilities by introduction of an image variant interior orientation in the calibration process improved results for most cameras. In this case, a modified Alpa 12 WA yielded the best results (29  μm maximum absolute length measurement error in object space). Extending the parameter model with FiBun software to model not only an image variant interior orientation, but also deformations in the sensor domain of the cameras, showed significant improvements only for a small group of cameras. The Nikon D3 camera yielded the best overall accuracy (25  μm maximum absolute length measurement error in object space) with this calibration procedure indicating at the same time the presence of image invariant error in the sensor domain. Overall, calibration results showed that digital cameras can be applied for an accurate photogrammetric survey and that only a little effort was sufficient to greatly improve the accuracy potential of digital cameras.     

ARCHITECTURE AND COMPONENTS OF PHOTOGRAMMETRIC WORKSTATIONS

Several generations of photogrammetric workstations have followed one another since the analytical plotter was developed at the beginning of the 1960s. The outcome of this evolution, resulting from important developments in mini- and microcomputers, is illustrated today by more and more powerful photogrammetric workstations based on distributed processing architecture. This paper introduces present day architectures, as well as hardware and software aspects of the various components of these systems including graphics workstation, real time processor, superimposition system, correlation system and special input/output devices. Finally, an attempt is made to outline the prospects for further evolution.     

Significance of the remotely sensed thermal infrared measurements obtained over a citrus orchard

In this work we have developed a theoretical model that helps the interpretation of the remotely sensed thermal infrared measurements carried out over citrus orchards. A detailed analysis of the different factors which take part in the definition of the effective emissivity and temperature (observation height, viewing angle, type of soil, dimensions and separation between orange trees) is made. The model was validated under vertical observation in a citrus orchard during seven nights. In this situation we have determined that the model performs to an accuracy of about 1%.     

Comparing spatially varying coefficient models: a case study examining violent crime rates and their relationships to alcohol outlets and illegal drug arrests

In this paper, we compare and contrast a Bayesian spatially varying coefficient process (SVCP) model with a geographically weighted regression (GWR) model for the estimation of the potentially spatially varying regression effects of alcohol outlets and illegal drug activity on violent crime in Houston, Texas. In addition, we focus on the inherent coefficient shrinkage properties of the Bayesian SVCP model as a way to address increased coefficient variance that follows from collinearity in GWR models. We outline the advantages of the Bayesian model in terms of reducing inflated coefficient variance, enhanced model flexibility, and more formal measuring of model uncertainty for prediction. We find spatially varying effects for alcohol outlets and drug violations, but the amount of variation depends on the type of model used. For the Bayesian model, this variation is controllable through the amount of prior influence placed on the variance of the coefficients. For example, the spatial pattern of coefficients is similar for the GWR and Bayesian models when a relatively large prior variance is used in the Bayesian model.