西南地区晚二叠世层序-古地理及聚煤特征

西南地区上二叠统赋存有丰富的煤炭资源,含煤地层自下而上分别是峨眉山玄武岩组、龙潭组（宣威组中、下段或吴家坪组）和长兴组（宣威组上段或汪家寨组）。本文对该区晚二叠世含煤岩系层序地层、岩相古地理及聚煤作用进行研究,以区域不整合面、沉积相转换面以及下切谷砂体底部冲刷面等为层序界面,结合石灰岩标志层向古陆方向延伸距离而显示的旋回性特征,将区内含煤岩系划分为3个三级层序和相应的低位、海侵及高位体系域。层序1形成于晚二叠世吴家坪阶早期,主要分布在川南隆起的南北两侧,包括川东北及滇东、黔西地区;层序2形成于吴家坪阶中期,层序3形成于吴家坪阶晚期及长兴阶,层序2和层序3在西南全区均发育。三个层序的发育特征反映出海侵自东向西脉动推进、东深西浅的古地理格局,当时物源区主要为西侧的康滇古陆,沉积相单元有从西到东依次为陆相冲积平原-过渡相潮坪及三角洲-海相碳酸盐台地的沉积相展布规律。成煤环境主要为河流岸后沼泽、三角洲平原分流间湾沼泽、海湾（泻湖）-潮坪沼泽等,以三角洲体系成煤作用最强。总体上随着海水自东向西不断侵进,有利的成煤环境亦随着海平面的上升而不断向西迁移,聚煤中心亦有逐渐向西迁移的规律。     

长江三峡库区秭归杨林桥镇震群成因

对三峡数字地震台网记录的2016年3—6月三峡工程库区秭归库段杨林桥镇小震群进行双差精定位,通过Snoke方法计算该震群中较大地震的震源机制解,并结合野外宏观调查等方法,分析震源参数的时空变化特征。结果表明:杨林桥镇小震群密集分布在2 km×3 km矩形范围内,有较明显的展布方向,但与邻近的仙女山断裂、九畹溪断裂和天阳坪断裂走向不一致;震群距长江干流超过10 km,与三峡水库无水利联系,无相关性;震群展布方向上有岩溶洞分布,且降雨丰富,初步判断成因类型为岩溶塌陷型。     

汶川地震震前与同震断层滑移的比较分析

本文利用GPS观测的1999-2007年汶川震前3期地表变形数据和2008年汶川同震地表变形数据,结合地震位错理论,通过高斯变换和坐标旋转建立断层模型,运用遗传算法,反演了龙门山断裂带断层震前3期和同震滑动参数。结果表明龙门山断层震前3期平均走滑位移为-5.39mm,倾向位移为2.66mm,与同震断层滑移相比较,发现震前断层的滑移趋势与同震断层滑移一致,均为逆冲兼右旋的挤压运动。比较震前3期逆冲方向的滑移量,发现逆冲滑移有加速的现象。并根据震前和同震的断层滑动量估算了汶川地震复发周期。     

考虑地形起伏和障碍体破裂的汶川地震强地面运动数值模拟

2008年5月12日四川汶川地区发生M_W7.9地震,震中位置103.4°E,31.06°N.这次地震造成了以汶川、映秀为中心及其周边地域建筑物的严重破坏和人员的重大伤亡,且因为高山等地形复杂区域抢险救灾的艰巨性,为及时救援造成很大干扰.为更好理解地形因素对于强地面数值模拟结果的影响,建立了包含地形起伏影响及去除地形影响的两类模型.同时,依据震源破裂过程运动学反演结果,建立了包含障碍体破裂过程的震源滑动模型,实现断层分段、空间倾角以及滑移角的动态设定.基于动力学的地震动模拟方法,通过对地震波传播过程的数值计算和后处理分析,模拟由地震激发的区域强地面运动过程.结果显示：（1）强震动台站的断层距对地形效应具有放大或抑制作用,距离断层破裂带越近,地形效应越明显,反之,距离越远,则地形效应越微弱;（2）因为地形高差与障碍体的影响,地震造成的峰值可能出现在震中区域之外;（3）考虑地形影响模型的地表峰值速度（PGV）区域位于汶川与北川附近;而未考虑地形影响模型的PGV区域位于灌县—江油断层的后半段,处清平、安县附近;对汶川地震近实时强地面运动波场的模拟、峰值图谱的圈定及未来大地震强地面运动特征的预测都有重要指示意义.     

2017年四川九寨沟MS7.0强震的余震重定位及主震震源机制反演

本文采用双差定位法对2017年8月8日至10月31日期间四川九寨沟M_S7.0主震及5200个余震序列进行相对定位,得到4036个重定位地震事件.采用中国区域地震台网观测到的宽频带垂直分向波形数据和W震相反演方法,得到了主震震源机制解.重定位结果显示,余震序列分别沿NNW和SSE两个方向扩展,展布长度约58 km,且这些余震主要集中在22 km深度之上.余震分布的另一个重要特点是具有分区特性,即在主震NNW方向约5 km处存在明显的西北和东南两区余震活动分界线;西北区的余震由深至浅具有较好连续性,而东南区却在约10 km深度处存在不连续性.余震分布的这种分区特征,说明九寨沟地震震源区的地壳结构存在强烈的不均匀性.余震分布与主震破裂特征的一致性,证实了我们定位结果的可靠性.主震的震源机制解展示出节面Ⅰ的走向/倾角/滑动角分别为246°/83.7°/-177°,而节面Ⅱ的走向/倾角/滑动角为155.7°/87.1°/-6.3°,最佳质心深度为15.5 km,矩震级M_W为6.5.根据余震分布较为垂直和主震震源机制解两节面的倾角均在80°以上,并结合野外地质调查结果,推测此次九寨沟地震为与节面Ⅱ参数相近的一次高角度的左旋走滑型事件.     

CHARACTERISTICS OF FOCAL MECHANISMS AND STRESS FIELD OF YUNNAN AREA

Using the seismic waveform data recorded by regional seismic network of Yunnan and Sichuan and the method of CAP, we calculate and obtain the focal mechanism of 268 earthquakes with the magnitude of M_L≥4.0 occurring in Yunnan during Jan. 1999 to Aug. 2014; then, we analyze the types and the regional feature of the focal mechanism of earthquakes in Yunnan, on the basis of the focal mechanism of 109 earthquakes analyzed by Harvard University. Based on the data of the above focal mechanism solutions, we adopt the method of damped regional-scale stress inversion to calculate the best-fitting tectonic stress tensor of every grid in Yunnan; and adopt the method of maximum principal stress to calculate the direction of maximum horizontal principal stress in Yunnan. The result shows that: (1)the strike-slip type is the most principal type of the earthquake focus in the study area and the second is the normal faulting type; while, the reverse-fault type is relatively small. The spatial distribution of focal mechanism is obvious. This reflects that the dynamic source and acting force are different in different parts of the study area. (2)The direction of the stress field in Yunnan shows a certain spatial continuity. Maximum horizontal principal compressive stress is mainly clockwise from north to south and counterclockwise from the west to the east. The direction of stress field shows inhomogeneity in space. There exist two stress conversion zones respectively in EW and NS direction. The inversion result of stress field shows that the stress field in Yunnan is complex and the principal stress direction changes greatly; and there are obvious differences in different regions.     

THE APPLICATION OF IMAGE-BASED MODELING IN PALEOEARTHQUAKE TRENCH STUDY

The geological structure exposed by paleoearthquake trenches is the key material to the right cognition of fault activity and paleoearthquake. However, paleoearthquake trenching inevitably destroys active tectonic geomorphic evidence and trench exposures are usually difficult to reserve. The conventional process of recording the delicate geological information, manually constructing photomosaics by image-editing software, is time-consuming and produces undesirable artificial distortions. Herein, we explored the process of constructing trench orthophotomosaics and the 3D image model using the Image-based Modeling technology and applied it to the Liutiaohe trench across the Tianqiaogou-Huangyangchuan Fault, Gansu Province. Based on the 3D image modeling and orthophotomosaic, we firstly constructed the control points and scale bars on cleaned trench walls and collected photos of all sections of the trench with a digital camera in the field, and then reconstructed the 3D model of the trench through the Agisoft PhotoScan, an efficient image-based modeling software, and finally yielded the 3D image model of the trench and othophotomasaics of the trench exposures. The results show that the automated workflow can produce seamless, sub-millimeter-level high-resolution photomosaics more quickly, with precision in the centimeter range, and the 3D image model is of great help to identify strata and geological structures in trenches with much lower capital and labor costs and low expertise levels compared with LiDAR, meanwhile, the 3D archive benefits the share and communication and even allows future reinterpreting the site using new insights.     

APPLICATION OF UAVLS TO RAPID GEOLOGICAL SURVEYS

Three-dimensional scanning with LiDAR has been widely used in geological surveys. The LiDAR with high accuracy is promoting geoscience quantification. And it will be much more convenient, efficient and useful when combining it with the Unmanned Aerial Vehicle (UAV). This study focuses on UAV-based Laser Scanning (UAVLS)geological field mapping, taking two examples to present advantages of the UAVLS in contrast with other mapping methods. For its usage in active fault mapping, we scanned the Nanpo village site on the Zhangxian segment of the West Qinling north-edge fault. It effectively removed the effects of buildings and vegetation, and uncovered the fault trace. We measured vertical offset of 1.3m on the terrace T₁ at the Zhang river. Moreover, we also scanned landslide features at the geological hazard observatory of Lanzhou University in the loess area. The scanning data can help understand how micro-topography affects activation of loess landslides. The UAVLS is time saving in the field, only spending about half an hour to scan each site. The amount of average points per meter is about 600, which can offer topography data with resolution of centimeter. The results of this study show that the UAVLS is expected to become a common, efficient and economic mapping tool.     

Late Quaternary Activity of the Chuxiong-Nanhua Fault and the 1680 Chuxiong MS6 ¾ Earthquake

In this paper, according to the results of the satellite imagery interpretation and field investigation, we study the active features and the latest active times of the Chuxiong-Nanhua fault, the Quaternary basins formation mechanism, and the relationship between the fault and the 1680 Chuxiong M_S6 ¾ earthquake. Several Quaternary profiles at Lvhe, Nanhua reveal that the fault has offset the late Pleistocene deposits of the T2 and T3 terraces of Longchuan river, indicating that the fault was obviously active in late Quaternary. The Chuxiong-Nanhua fault has been dominated by dextral strike slip motion in the late Quaternary, with an average rate of 1.6-2.0mm/a. Several pull apart Quaternary basins of Chuxiong, Nanhua, and Ziwu etc. have developed along the fault. The 1680 Chuxiong M_S6 ¾ earthquake and several moderate earthquakes have occurred near the fault. The Chuxiong-Nanhua fault are the seismogenic structure of those earthquakes, the latest fault movement was in the late-Pleistocene, and even the Holocene. In large area, the Chuxiong-Nanhua fault and the eastern Qujiang fault and the Shiping fault composed a set of NW-trending oblique orientation active faults, and the motion characteristics are all mainly dextral strike slip. The motion characteristics, like the red river fault of the Sichuan-Yunnan Rhombic Block southwestern boundary, are concerned with the escaping movement of the Sichuan-Yunnan Rhombic Block.     

水下多路液压快速接头的夹头结构分析与优化

深海油气田水下生产系统装备之间的精准连接是国际公认的技术难题,对接一般通过深海连接器完成。弹性夹头是水下连接器的重要组成部分,其性能关系到海洋油气生产系统的安全性和可靠性。弹性夹头的主要作用是在水下机器人的辅助下连接和锁紧连接器的固定端和移动端。采用ABAQUS软件的显式动力学分析模块计算夹头夹紧心轴这一过程中的应力、反作用力状态。三维模型仿真结果表明,锁紧过程中弹性夹头的最大应力不超过430 MPa,小于所选取的材料屈服强度480 MPa。采用正交试验和方差分析的方法研究夹头的长度、夹头与心轴的间隙等几个关键尺寸从而分析影响夹头应力和连接所需推力的最显著因素。对夹头的结构进行优化设计,同时也为夹头心轴结构的设计提供了理论依据。最后,通过试验研究对样机进行测试,测试结果表明,夹紧动作所需的最大推力在700 N以下。