临汾"8.26"区域性大暴雨过程分析

利用micaps业务平台常规资料、数值预报产品、卫星云图，对临汾市2003年8月26日区域性暴雨和大暴雨的环流背景、影响系统、热带低压登陆副热带高压东退以及物理量条件进行了诊断分析，探讨了副热带高压进退及台风登陆位置在这次大暴雨过程中起到了非常重要的作用。分析结果在暴雨预报业务及暴雨研究中有一定的指示意义。     

晋中市人工防雹减灾系统研究

利用雷达探测信息、地面气象观测资料和高空探测资料 ,通过计算机分析处理 ,对冰雹天气的发生、发展进行分析预报 ,并计算多单体任意雹云核心部位的覆盖面积 ,对不同地理位置的各炮点 ,经过极坐标和三维直角坐标系的变换 ,确定雹云相对于不同空间位置的各炮点的准确位置 ,并对各炮点不同弹型的弹道方程进行连续模拟和分析计算 ,最终确定在炮控范围内的雹云体内弹着点的准确位置 ,并通过计算云中含水量、零度层高度、云体体积 ,准确得出各个炮点的射击诸元 (射击仰角、方位、扇面和射击剂量等 ) ,通过通讯网络 ,通知各有关炮点实施作业     

电阻率综合剖面法在东安岩金矿区勘探中的应用

在黑龙江省东安岩金矿勘探中,采用常规中梯、不同极距偶极、复合对称四极等电阻率剖面测量等物探方法,确定含金硅化蚀变带产状,指导钻探施工,降低勘探费用,缩短勘探周期.     

水位下降卸荷诱发库岸边坡快速失稳机理分析

本文以某工程现场岩质边坡为例，采用与传统裂隙水压力分布不同的水压力分布方式和边坡裂隙中可能发生的水锤效应相耦合，分析研究了岩质边坡发生滑动的机理及稳定性。研究表明，本文所采用的水压力分布方式较为符合边坡中的水压力分布实际情况，可以给出一个较为合理的稳定系数。当考虑水锤效应时，岩质边坡的稳定系数大大降低，说明水锤效应加剧了边坡破坏失稳的过程。本文所采用的水压力分布方式与边坡裂隙中的水锤效应相耦合的计算方法，在边坡稳定性分析中具有参考意义。     

西风带研究动态

本文较为详细地介绍了影响我国气候的重要因子——西风带的一些国内外最新研究动态,这些研究动态和研究成果将对山西省的气候研究起到积极作用。     

陕西省信用联社市县级计算机网络防雷工程设计分析

“山西省卫星农网”依托其省、市、县三级专门服务于农业的信息交流平台,能够及时地让农户了解国家和地方的农业政策及办事程序等,成为农户和政府间的信息桥梁,为广大农村提供准确的各类气象信息,有效地指导了农业生产,大大地减小了天气灾害损失。山西卫星农网作为山西省规模较大的农业专业网站,其影响和作用正逐步地发挥出来。     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

The influence of coupled physical swelling and chemical reactions on deformable geomaterials

Coupled thermo‐hydro‐mechanical‐chemical modelling has attracted attention in past decades due to many contemporary geotechnical engineering applications (e.g., waste disposal, carbon capture and storage). However, molecular‐scale interactions within geomaterials (e.g., swelling and dissolution/precipitation) have a significant influence on the mechanical behaviour, yet are rarely incorporated into existing Thermal‐Hydro‐Mechanical‐Chemical (THMC) frameworks. This paper presents a new coupled hydro‐mechanical‐chemical constitutive model to bridge molecular‐scale interactions with macro‐physical deformation by combining the swelling and dissolution/precipitation through an extension of the new mixture‐coupling theory. Entropy analysis of the geomaterial system provides dissipation energy, and Helmholtz free energy gives the relationship between solids and fluids. Numerical simulation is used to compare with the selected recognized models, which demonstrates that the swelling and dissolution/precipitation processes may have a significant influence on the mechanical deformation of the geomaterials.