Structural Control of Sand Bodies and Deep Exploration for Oil and Gas

The structural styles can be used to analyses and predict developments and distributions of sand bodies in a rift basin. The dynamic process of faulting and sedimentation can be expressed as follow: the basin topography controlled by fault activity can control water dynamics; which in turn affect the transport and sedimentation of sediments. The corresponding analysis between structural styles and sand depositional types includes the following aspects: (1) in section, the corresponding between development of fault terraces and sand depositional types; (2) in plane, the relationship between faults' association and distributions of sand bodies. There are four types of terrace styles to be identified. They are Steep Slope Single Fault Terrace (SSSFT), Steep Slope Multiple Fault Terrace (SSMFT), Gentle Slope (GS) and Gentle Slope Multiple Fault Terrace (GSMFT), which also can be divided into six subtypes by the timing of the faults activities and the directions of their activity migrations (basinward and landward or marginward). They correspond to the following sand depositions such as alluvial fan, fan delta and turbidite fan etc.. The analysis of structure-sedimentation is a discussion on the rank Ⅲ sequence evolution under the condition of pulsing or episodic fault activities. It has been recognized four plane fault associations such as the comb, the broom, the fork and the fault-fold association as well as the corresponding sand distributions. Structural-sedimentary models above mentioned are significant for the deep oil and gas exploration when lacking of the drill data. It may reduce multiple resolutions in the interpretation of seismic-sedimentary facies and promote sand predictions through the constraints of the structural styles of the basin units. The structural-sedimentary pattern can be used as a geological model in oil and gas exploration in the rift basins.     

计算机制图综合的研究进展

本文简明而较全面地评述利用计算机进行制图综合研究之发展的过去和现状,并展望该领域的未来发展趋势。     

VLBI软件相关处理机系统中的数据预处理方法

在绕月探测工程VLBI数据处理中心的软件相关处理机系统中，各VLBI观测站采集的原始数据必须经过预处理才能进行相关处理与条纹搜索等运算。处理机预处理模块对来自各个观测站的MARK5观测数据进行模式判别、寻找同步头、计算CRC校验码、时间同步等操作，生成时间长度为1min的标准Linux文件，并存放于硬盘阵列上，供相关处理和条纹搜索使用。预处理模块和软件相关处理模块、条纹搜索模块协调配合，保证了软件相关处理机系统在准实时和事后两种观测模式下的性能指标。     

用CE-318太阳光度计资料研究银川地区气溶胶光学厚度特性

根据CE-318数据,利用Bouguer定律计算了银川地区的大气气溶胶光学厚度,并分析其变化特征。结果表明,该地区大气气溶胶光学厚度具有明显的日变化和季节变化。日变化有4种类型：1)变化相对稳定;2)整体上呈上升的趋势;3)早晚小,中午大;4)早晨09-11时出现峰值,其他时间变化较小。季节变化则是冬、春季节大,秋季次之,夏季最小;春季大气中的主要成分是沙尘,冬季大气的主要成分是人类活动排放的颗粒物,夏季由于降水多,气溶胶数浓度较低,气溶胶光学厚度较小。     

2003广西主要城市空气质量评价及空气污染物浓度与气象条件关系

从南宁、桂林、北海三城市空气质量自动监测站监测到二氧化硫(SO2),二氧化氮(NO2),可吸入颗粒物(PM10)的日均浓度数据计算的空气污染指数API得出:2003年三城市空气质量状况整体为 级"优"或 级"良",达到了国家环境保护总局对城市环境规定的标准,特别是桂林市的空气质量最好。对各种污染物月平均浓度值与地面气象要素关系进行相关分析,发现相关性非常好,其中与气压呈正相关,与气温、水汽压、相对湿度、降雨量、风速、0厘米地温等要素呈反相关。各种污染物日平均浓度值与地面风速相关也非常好。     

Progress in the Study of Deep Profiles of Tibet and the Himalayas (INDEPTH)

This paper introduces 8 major discoveries and new understandings with regard to the deep structure and tectonics of the Himalayas and Tibetan Plateau obtained in Project INDEPTH, They are mainly as follows. (1) The upper crust, lower crust and mantle lithosphere beneath the blocks of the plateau form a "sandwich" structure with a relatively rigid-brittle upper crust, a visco-plastic lower crust and a relatively rigid-ductile mantle lithosphere. This structure is completely different from that of monotonous, cold and more rigid oceanic plates. (2) In the process of north-directed collision-compression of the Indian subcontinent, the upper crust was attached to the foreland in the form of a gigantic foreland accretionary wedge. The interior of the accretionary wedge thickened in such tectonic manners as large-scale thrusting, backthrusting and folding, and magmatic masses and partially molten masses participated in the crustal thickening. Between the upper crust and lower crust lies a large detachment (e.g     

地图内容质量特征和数量特征概括的数学模型

在分类的定义下,根据概念外延的包含关系,给出了质量特征概括的数学模型。在定义数量的基础上,推导出级距概念,并根据两个不同级距的偏序集中大级距子集包含多个小级距子集的关系,给出了数量特征概括的数学模型。本文给出的地物质量特征和数量特征概括的数学模型,可对地图编制过程中诸如随地图比例尺缩小而缩减分类,扩大级差等经验事实,作出定量的描述和理论阐释。     

基于双二次插值多项式的DEM传递误差模型

基于函数插值方法,得出了基于不完全双二次插值多项式的规则格网数字高程模型(DEM)的表面表达模型,并推导了相应的传递误差公式.公式表明,不完全双二次多项式的DEM传递误差与双线性多项式的传递误差相同.但由于不完全双二次多项式的DEM表面建模误差低于线性多项式的DEM表面建模误差,因此基于不完全双二次多项式的DEM表面模型具有更高的精度.     

结构光系统结合数码相机的小物体高质量纹理重建

针对双鸟饕餮纹夔神鼍鼓等小文物或其他小型物体,提出了基于结构光扫描系统结合普通高分辨率单反数码相机的纹理重建方法。该方法具有自动化程度高、效率和质量高的特点,其中主要解决了单张高分辨率影像与物体几何模型的自动配准,以及配准后从多张影像生成无缝纹理模型的问题。实验证明了本文方法的可行性和有效性。     

利用PLSA技术进行图像分割

引用概率潜语义分析（PLSA）技术作了航空影像图像分割的尝试,介绍了PLSA图像分割的原理方法和分割的具体算法。通过三幅航空影像分割实验,并与生物地理学图像分割（BBOIS）方法和基于吸引子算法的结果作了对比,结果表明,本文方法具有一定的优越性,是一个很有潜力的图像分割方法。