新疆哈密地区早泥盆世珊瑚动物群及其地质意义

新疆哈密地区下泥盆统发育,南部图拉尔根地区下泥盆统为大南湖组,北部三道白杨沟地区为卓木巴斯套组。在大南湖组中共发现四射珊瑚2属5种,床板珊瑚7属12种,并建立四射珊瑚组合Syringaxon moriense和床板珊瑚组合Pseudofavosites giganteus;在卓木巴斯套组共发现四射珊瑚5属7种,床板珊瑚2属2种,并建立四射珊瑚组合Orthopaterophyllum junggarense和床板珊瑚组合Pachyfavosites junggarensis。通过珊瑚在地层中的分布及组合的时代对比,确定前者的时代为早泥盆世埃姆斯期早期,后者的时代为埃姆斯期中晚期。通过与国内外典型的早泥盆世埃姆斯期珊瑚动物群的对比,认为哈密地区的珊瑚动物具有典型的早泥盆世温带动物群特征,在生物古地理区系上属于北方大区准噶尔-兴安省。     

利用GPR天线-目标极化的瞬时属性分析方法探测LNAPL污染土壤

轻非水相流体(LNAPL)泄漏后会对土壤和地下水造成严重污染,为了准确探测出LNAPL泄漏范围,本文将GPR天线-目标极化的瞬时属性分析方法应用于轻非水相流体污染土壤探测的研究中。采用注入柴油的石英砂砂箱在实验室建立污染土壤模型,利用探地雷达对该污染土壤分别进行天线方位为0°、90°的测量。LNAPL土壤污染物形状、大小、结构并不规则,因此可以通过0°和90°方位天线测量来分析天线-目标极化特征,了解目标物的走向、形状等地下介质信息。通过对预处理后的包含天线-目标极化特征的信息进行瞬时属性分析,LNAPL污染范围可以被清晰地识别,提高了GPR探测能力。     

Characterizing groundwater/surface-water interactions in the interior of Jianghan Plain,central China

Hydrogeology Journal - Quantifying groundwater/surface-water interactions is essential for managing water resources and revealing contaminant fate. There has been little concern on the exchange...     

A non-hydrostatic model for the numerical study of landslide-generated waves

This paper proposes and demonstrates a two-layer depth-averaged model with non-hydrostatic pressure correction to simulate landslide-generated waves. Landslide (lower layer) and water (upper layer) motions are governed by the general shallow water equations derived from mass and momentum conservation laws. The landslide motion and wave generation/propagation are separately formulated, but they form a coupled system. Our model combines some features of the landslide analysis model DAN3D and the tsunami analysis model COMCOT and adds a non-hydrostatic pressure correction. We use the new model to simulate a 2007 rock avalanche-generated wave event at Chehalis Lake, British Columbia, Canada. The model results match both the observed distribution of the rock avalanche deposit in the lake and the wave run-up trimline along the shoreline. Sensitivity analyses demonstrate the importance of accounting for the non-hydrostatic dynamic pressure at the landslide-water interface, as well as the influence of the internal strength of the landslide on the size of the generated waves. Finally, we compare the numerical results of landslide-generated waves simulated with frictional and Voellmy rheologies. Similar maximum wave run-ups can be obtained using the two different rheologies, but the frictional model better reproduces the known limit of the rock avalanche deposit and is thus considered to yield the best overall results in this particular case.     

Evaluating igneous sources of the Taveyannaz formation in the Central Alps by detrital zircon U–Pb age dating and geochemistry

Late Palaeogene syn-tectonic volcanic products have been found in the Northern Alpine foreland basin and in the South Alpine hemipelagic basin. The source of abundant volcanic fragments is still in debate. We analyzed the geochronology and geochemistry of detrital zircons, and evaluated their temporal and genetic relationships with potential volcanic sources. The study shows that the detrital zircon U–Pb age patterns have two major age groups: a dominance (ca. 90%) of pre-Alpine zircons was found, as commonly observed in other Alpine flysch formations. These zircons apparently derived from erosion of the early Alpine nappe stack in South Alpine and Austroalpine units. Furthermore, a few Neo-Alpine zircons (ca. 10%) have ages ranging from Late Eocene to Early Oligocene (~ 41–29 Ma). Both source materials were mixed during long riverine transport to the basin margins before being re-deposited by gravity flows. These Palaeogene ages match with the activity of Peri-Adriatic magmatism, including the Biella volcanic suite as well as the Northern Adamello and Bergell intrusions. The values of REE and ¹⁷⁶Hf/¹⁷⁷Hf_(t) ratios of the Alpine detrital zircons are in line with the magmatic signatures. We observe an in time and space variable supply of syn-sedimentary zircons. From late Middle Eocene to Late Eocene, basin influx into the South Alpine and Glarus (A) basins from the Northern Adamello source is documented. At about 34 Ma, a complete reorganisation is recorded by (1) input of Bergell sources into the later Glarus (B) basin, and (2) the coeval volcaniclastic supply of the Haute-Savoie basin from the Biella magmatic system. The Adamello source vanished in the foreland basin. The marked modification of the basin sources at ~ 34 Ma is interpreted to be initiated by a northwestern shift of the early Alpine drainage divide into the position of the modern Insubric Line.     

Spatial and temporal variations of suspended solid concentrations from 2000 to 2013 in Poyang Lake,China

Concentrations of suspended solids in lakes can affect the latter’s primary productivity and reflect changes in sediment deposition. Determining the temporal and spatial distribution of suspended solid concentrations has important significance in lake water environmental management; this is particularly urgent for Poyang Lake, the largest freshwater lake in China. In this study, suspended solid concentration inversion models for Poyang Lake were created using a semi-empirical method with regression analysis between continuously measured suspended solid concentration data and multi-band moderate-resolution imaging spectroradiometer images for spring, summer, autumn, and winter from 2009 to 2012. The coefficient of determination (R²) is from 0.6 to 0.9 and the average relative error for the accuracy verification was between 10 and 30%. The seasonal distributions of suspended solid concentrations in Poyang Lake from 2000 to 2013 were then obtained using optimal reversal models. The results showed that the seasonal variation in suspended solid concentrations had a “W” shape in which high spring and autumn and low summer and winter values. The suspended solid concentrations increased annually from 2000 to 2013 and were mainly distributed in the northern and central portions of the lake, with lower values along the shorelines. Further analysis indicated that the large difference in water level between the wet and dry seasons is an important factor in explaining these seasonal variations. Moreover, the suspended solid concentrations were poorly correlated with water temperature and chlorophyll-a concentration but more highly correlated with the deferred chlorophyll-a concentration.     

庐枞矿集区中东部七家山—马口地区深部找矿潜力分析

为调查庐枞矿集区中东部七家山—马口地区深部矿产资源潜力,利用小波变换方法提取深源重磁场,通过对垂向一阶导数Z与水平方向导数模S进行参数变换,突出深源重磁场的局部异常; 结合频谱激电(spectrum induced polarization,SIP)、可控源音频大地电磁测深(controlled source audio-frequency magneto tellurics,CSAMT)成果,在调查区深部查明了一条长大于3.0 km、宽大于0.5 km的高重低磁、低阻高极化异常带; 根据调查区内外已知铜矿(化)体分布规律,结合已知矿(化)体在深源重磁异常中的分布及钻孔(zk4601)钻探验证结果,认为上述异常带是铜多金属矿化蚀变带的反映,是寻找铜多金属矿的有利部位,具有较好的找矿前景。     

Synthesis and characterisation of a multifunctional oil-based drilling fluid additive

An oil-based drilling fluid additive H-DEA (or humic acid-cocamide diethanolamine) was synthesised using humic acid and cocamide diethanolamine as raw materials. The rheological behaviors of H-DEA showed that the synthesised product has the good properties in both decreasing the filtrate loss and improving rheology property of oil-based drilling fluids compared with other commercially available additives. Under the optimal additive amount of 3%, both API filtrate loss and yield point changed remarkably from 5.40 to 0.41 mL and 9.0 to 25.6 Pa, respectively. Furthermore, differential scanning calorimetry (DSC) showed that H-DEA has good thermal stability in a wide temperature range up to 170 °C. Infrared spectroscopy (IR) and rheological analysis revealed that the possible mechanism of the multifunctional effects may be attributed to the existing of high density of strong polar groups, hydrogen bonds, electrostatic forces, and intermolecular association on H-DEA molecular structure. The results of the study showed that the synthesised H-DEA can be potentially used as a multifunctional oil-based drilling fluid additive in oil-drilling excavation.     

A direction-dependent shear strength criterion for rock joints with two new roughness parameters

The surface morphology of a rock joint is closely related to its mechanical properties. To reasonably characterize a rock surface, two new roughness parameters were proposed in this paper. One is related to the average slope angle of asperities that contribute to the shear strength, and the other reflects the frictional behavior of asperities that is defined as the maximum possible contact area in the shear direction. Taking the standard joint roughness coefficient profiles as example, these two roughness parameters can be applied to describe the directional characteristics of shear strength. Based on their relationships with initial dilation angles, the proposed roughness parameters were incorporated into a peak shear strength criterion. It is shown that the predicted peak shear strength is consistent with experimental data, and there is a power–law relationship. The application range of new roughness parameters was determined, which may facilitate a measurement process.