Time scale of an early to mid-Paleozoic orogenic cycle of the long-lived Central Asian Orogenic Belt, Inner Mongolia of China: Implications for continental growth

We present a detailed, new time scale for an orogenic cycle (oceanic accretion–subduction–collision) that provides significant insights into Paleozoic continental growth processes in the southeastern segment of the long-lived Central Asian Orogenic Belt (CAOB). The most prominent tectonic feature in Inner Mongolia is the association of paired orogens. A southern orogen forms a typical arc-trench complex, in which a supra-subduction zone ophiolite records successive phases during its life cycle: birth (ca. 497–477 Ma), when the ocean floor of the ophiolite was formed; (2) youth (ca. 473–470 Ma), characterized by mantle wedge magmatism; (3) shortly after maturity (ca. 461–450 Ma), high-Mg adakite and adakite were produced by slab melting and subsequent interaction of the melt with the mantle wedge; (4) death, caused by subduction of a ridge crest (ca. 451–434 Ma) and by ridge collision with the ophiolite (ca. 428–423 Ma). The evolution of the magmatic arc exhibits three major coherent phases: arc volcanism (ca. 488–444 Ma); adakite plutonism (ca. 448–438 Ma) and collision (ca. 419–415 Ma) of the arc with a passive continental margin. The northern orogen, a product of ridge-trench interaction, evolved progressively from coeval generation of near-trench plutons (ca. 498–461 Ma) and juvenile arc crust (ca. 484–469 Ma), to ridge subduction (ca. 440–434 Ma), microcontinent accretion (ca. 430–420 Ma), and finally to forearc formation. The paired orogens followed a consistent progression from ocean floor subduction/arc formation (ca. 500–438 Ma), ridge subduction (ca. 451–434 Ma) to microcontinent accretion/collision (ca. 430–415 Ma); ridge subduction records the turning point that transformed oceanic lithosphere into continental crust. The recognition of this orogenic cycle followed by Permian–early Triassic terminal collision of the CAOB provides compelling evidence for episodic continental growth.     

Melting of the subcontinental lithospheric mantle by the Emeishan mantle plume; evidence from the basal alkaline basalts in Dongchuan, Yunnan, Southwestern China

The Emeishan continental flood basalt (ECFB) sequence in Dongchuan, SW China comprises a basal tephrite unit overlain by an upper tholeiitic basalt unit. The upper basalts have high TiO₂ contents (3.2–5.2 wt.%), relatively high rare-earth element (REE) concentrations (40 to 60 ppm La, 12.5 to 16.5 ppm Sm, and 3 to 4 ppm Yb), moderate Zr/Nb and Nb/La ratios (9.3–10.2 and 0.6–0.9, respectively) and relatively high _{Nd (t)} values, ranging from − 0.94 to 2.3, and are comparable to the high-Ti ECFB elsewhere. The tephrites have relatively high P₂O₅ (1.3–2.0 wt.%), low REE concentrations (e.g., 17 to 23 ppm La, 4 to 5.3 ppm Sm, and 2 to 3 ppm Yb), high Nb/La (2.0–3.9) ratios, low Zr/Nb ratios (2.3–4.2), and extremely low _{Nd (t)} values (mostly ranging from − 10.6 to − 11.1). The distinct compositional differences between the tephrites and the overlying tholeiitic basalts cannot be explained by either fractional crystallization or crustal contamination of a common parental magma. The tholeiitic basalts formed by partial melting of the Emeishan plume head at a depth where garnet was stable, perhaps > 80 km. We propose that the tephrites were derived from magmas formed when the base of the previously metasomatized, volatile-mineral bearing subcontinental lithospheric mantle was heated by the upwelling mantle plume.     

微型氢化物发生装置在冷原子吸收分光光度法测汞中的应用

采用微型氢化物发生装置-冷原子吸收分光光度法测定了焊锡料及纽扣电池中的汞。在酸性介质中,用硼氢化钾将汞离子还原为汞原子,用载气将汞蒸气导入石英管,原子吸收分光光度计在波长253.7 nm处进行测定。选择了实验条件,对共存离子的干扰等进行了考察。方法的检出限为0.34 ng/mL,11次测定的相对标准偏差(RSD)小于6%,加标回收率为94.4%~104.7%。     

徐州土壤多环芳烃的环境地球化学迁移特征

选择江苏徐州黄棕壤进行不同深度层位多环芳烃含量的定量分析,研究并探讨了多环芳烃在土壤深度剖面中的地球化学迁移特征。研究结果显示,多环芳烃在徐州土壤剖面中主要集中在地表0~20 cm内。其中低环多环芳烃化合物的迁移能力较强,4~6环等高环化合物相对较难迁移,主要残留于地表生态系统环境中。     

数字矿床模型研究与系统实现

数字矿床模型(DDM)是传统矿床模型的数字化.本文论述了数字矿床模型的概念,提出了其主要组成结构和建模关键技术.在吸收国内外地质领域专家系统建立的经验基础上,将人工智能技术与地理信息技术(WebGIS)相结合,通过构建矿床模型知识库,建立数字矿床模型推理网络结构,并以斑岩型铜矿为例论述了建立数字矿床模型的系统过程.本文是"十一五"期间国家高技术研究发展(863)计划的阶段成果.     

东秦岭二郎坪群中火山成因块状硫化物矿床地质地球化学特征及其成因讨论

二郎坪群是东秦岭造山带重要的组成部分,其火山建造中广泛发育有火山成因块状硫化物(VMS)矿床.文章总结并分析了南阳盆地东、西两侧二郎坪群中3个典型矿床(刘山岩、水洞岭和上庄坪)的研究资料,把二郎坪群VMS矿床分为3类:Zn-Cu型矿床(刘山岩矿床);Zn-Cu型与Zn-Pb-Cu型矿床(水洞岭矿床);Zn-Pb-Cu型矿床(上庄坪矿床).从刘山岩矿床到水洞岭矿床,再到上庄坪矿床,铜的含量减少,铅的含量增多.二郎坪群VMS矿床矿石富集LREE、Ce负异常及Eu正异常,说明矿床为热液成因.石英和重晶石中流体包裹体的氢氧同位素特征表明,成矿流体主要来自建造水,南阳盆地以西,矿床成矿流体中伴有较多古大气降水.矿石的硫同位素特征说明,二郎坪群VMS矿床中的硫可能为地幔岩浆硫和海水硫的混合硫.围岩与矿石的铅同位素组成基本一致,说明矿石和围岩可能来源于相似的物源区,成矿元素主要来源于地幔或下地壳深源物质,而水洞岭矿床明显有上地壳浅源物质的混染.研究表明,南阳盆地以西的水洞岭和上庄坪矿床可能形成于大陆边缘海环境,盆地规模较小,受陆源物质影响较大;而南阳盆地以东的刘山岩矿床可能形成于远洋盆地,盆地到达成熟阶段.用地震泵模式可解释二郎坪群VMS矿床的成因机制.     

内蒙古羊蹄子山-磨石山钛矿床锐钛矿、金红石和钛铁矿的矿物学特征

羊蹄子山-磨石山钛矿床的钛矿物主要为锐钛矿、金红石和钛铁矿。锐钛矿化学成分的特点是FeO含量明显比金红石要低;主要X光粉晶谱线为3.518(100)、2.377(14)和1.667(11);晶胞参数a()=3.786,c()=9.513;拉曼光谱谱线(cm-1)为516、395、195和143。金红石的主要X光粉晶谱线为3.250(100)、1.688(40)和2.488(29);晶胞参数为a()=4.595,c()=2.962;拉曼光谱谱线(cm-1)为610和446。钛铁矿的成分特点是富锰贫镁,与攀西地区岩浆型钒钛磁铁矿矿床中的钛铁矿正好相反。所有上述钛(铁)氧化物矿物学特征,进一步说明该矿床是在中元古代在海底与基性火山活动有关的热水沉积后经区域变质和局部又遭受后期热液改造而成。     

内蒙古正蓝旗羊蹄子山-磨石山钛矿区硅质岩地球化学特征及沉积环境意义

文章通过详细的野外地质调查和系统的岩石化学、稀土元素、微量元素及硅、氧同位素等研究,探讨了羊蹄子山-磨石山钛矿区无矿白色硅质岩和富钛硅质岩的成因及形成地质构造环境。研究结果表明,呈厚层状产出的无矿白色硅质岩具较高的SiO2、Al2O3含量及Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值,稀土元素总量很低,其北美页岩标准化配分模式为向右倾的曲线,无明显铈异常和铕异常,表明其形成于受陆源影响的大陆边缘构造环境;赋矿岩系中薄层状富钛硅质岩的TiO2、Fe2O3、Cu、V含量较高,但Al/(Al Fe Mn)、Al2O3/(Al2O3 Fe2O3)比值较低,稀土元素总量较高,北美页岩标准化曲线为明显左倾型-平坦型,具弱的负铈异常,表明其形成于洋脊及附近环境。两种硅质岩的δ30Si值为变化较小的负值,与热水沉积和某些生物成因硅质岩的硅同位素组成相似,两者的δ18O值范围和平均值均相似。两类硅质岩的成因及形成构造环境不同,富钛硅质岩的地球化学特征表明,该矿床的形成与本区元古宙海底火山热液喷流作用有关。     

冈底斯驱龙斑岩铜钼矿床的岩浆侵位中心和矿化中心:破裂裂隙和矿化强度证据

驱龙斑岩铜钼矿床是迄今为止在西藏冈底斯成矿带上发现的规模最大的铜矿床.文章根据对驱龙矿区各类岩石破裂裂隙的野外实测数据,结合矿区已有钻孔品位资料,分别绘制了矿区地表破裂裂隙等值线图、走向投影图及梅花图、钻孔5 000 m海拔标高水平切面Cu、Mo品位等值线图.研究结果表明,驱龙斑岩铜钼矿床的岩石中破裂裂隙相当发育,连成一片,没有明显的多个高值中心,空间上破裂裂隙呈放射状产出;5 000 m海拔标高水平切面显示Cu、Mo矿化较强、较均匀,矿化呈面状,为典型的由单一斑岩体侵位造成的中心式矿化特征.据破裂裂隙和Cu、Mo矿化空间分布,可确定驱龙矿区岩浆中心和矿化中心均位于钻孔405、1205、801、809所围成的矩形区域附近.     

大型敞流坳陷湖盆浅水三角洲与湖盆中心砂体的形成与分布

大型敞流坳陷湖盆浅水三角洲及湖盆中心砂体已成为中国陆相盆地岩性油气藏最重要的勘探目标。通过对现代典型湖盆浅水三角洲的深入分析,结合我国中、新生代大型坳陷湖盆浅水三角洲及湖盆中心砂体的地质研究,取得以下主要进展与认识：①在分析浅水三角洲形成地质背景的基础上,按照供源体系、湖水深度及三角洲前缘倾斜坡度将湖盆三角洲分为9种成因结构类型;②建立了毯式浅水曲流河三角洲的沉积模式,指出末端分流河道及末端决口扇是浅水曲流河三角洲的典型微相类型;③分析了浅水三角洲砂体大面积分布的形成条件,指出敞流湖盆是湖盆中心浅水三角洲砂体发育的重要条件,敞流通道对湖盆中心砂体分布有重要控制作用;④湖盆中心发育河流、三角洲、湖流及密度底流砂体等牵引流成因砂体,也发育洪水浊积扇及滑塌浊积扇等重力流成因砂体;⑤大型浅水三角洲体系三级层序界面对岩性（成岩）圈闭的发育有重要控制作用,三角洲平原带层序界面上覆叠置砂体富集岩性油气藏,勘探潜力大。本文研究成果希对坳陷湖盆沉积学研究及岩性油气藏勘探能有推动作用。