High-pressure eclogites in northern Jiangsu – southern Shandong province, eastern China

Abstract Eclogites are distributed for more than 500 km along a major tectonic boundary between the Sino-Korean and Yangtze cratons in central and eastern China. These eclogites usually have high-P assemblages including omphacite + kyanite and/or coesite (or its pseudomorph), and form a high-P eclogite terrane. They occur as isolated lenses or blocks 10 cm to 300 m long in gneisses (Type I), serpentinized garnet peridotites (Type II) and marbles (Type III). Type I eclogites were formed by prograde metamorphism, and their primary metamorphic mineral assemblage consists mainly of garnet [pyrope (Prp) = 15–40 mol%], omphacite [jadeite (Jd) = 34–64 mol%], pargasitic amphibole, kyanite, phengitic muscovite, zoisite, an SiO₂ phase, apatite, rutile and zircon. Type II eclogites characteristically contain no SiO₂ phase, and are divided into prograde eclogites and mantle-derived eclogites. The prograde eclogites of Type II are petrographically similar to Type I eclogites. The mantle-derived eclogites have high MgO/(FeO + Fe₂O₃) and Cr₂O₃ compositions in bulk rock and minerals, and consist mainly of pyrope-rich garnet (Prp = 48–60 mol%), sodic augite (Jd = 10–27 mol%) and rutile. Type III eclogites have an unusual mineral assemblage of grossular-rich (Grs = 57 mol%) garnet + omphacite (Jd = 30–34 mol%) + pargasite + rutile. Pargasitic and taramitic amphiboles, calcic plagioclase (An₆₈), epidote, zoisite, K-feldspar and paragonite occur as inclusions in garnet and omphacite in the prograde eclogites. This suggests that the prograde eclogites were formed by recrystallization of epidote amphibolite and/or amphibolite facies rocks with near-isothermal compression reflecting crustal thickening during continent–continent collision of late Proterozoic age. Equilibrium conditions of the prograde eclogites range from P > 26 kbar and T= 500–750°C in the western part to P > 28 kbar and T= 810–880°C in the eastern part of the high-P eclogite terrane. The prograde eclogites in the eastern part are considered to have been derived from a deeper position than those in the western part. Subsequent reactions, manifested by (1) narrow rims of sodic plagioclase or paragonite on kyanite and (2) symplectites between omphacite and quartz are interpreted as an effect of near-isothermal decompression during the retrograde stage. The conditions at which symplectites re-equilibrated tend to increase from west (P < 10 kbar and T < 580°C) to east (P > 9 kbar and T > 680°C). Equilibrium temperatures of Type II mantle-derived eclogites and Type III eclogite are 730–750°C and 680°C, respectively.     

基于Illustrator标图的大型挂图制作技巧

随着大型挂图的广泛应用,对大型挂图制作的研究也越来越重要。本文结合具体的任务实践,主要介绍了Illustrator下标图的大型挂图的制作流程,总结了标图过程中的一些技巧,为以后的大型挂图的标图制作提供参考依据。     

GIS和RS技术在湿地资源研究中的应用——以大庆市湿地为例

以大庆市湿地为研究对象,以地理信息系统和遥感技术为技术平台,介绍了湿地环境因子研究工作程序及湿地现状类型分布研究,分析了地理信息系统和遥感技术在湿地资源研究中的地位和作用,从而为GIS与RS技术在湿地资源应用研究中提供理论支持。     

利用C-F模型识别僵尸网络迁移

基于C-F模型识别僵尸网络的迁移,以僵尸网络迁移过程中表现出的多个特征为基础,提出了一种识别僵尸网络迁移的方法,能够协同多个特征判断给定的两批僵尸主机是否具有迁移关系。通过几个典型僵尸样本的评测,有效地识别了僵尸网络的迁移行为。与单纯采用IP地址重合度的方法进行了对比,在僵尸网络成员数量动态变化的情况下,仍然保持了理想的识别结果。     

融合点、对象、关键点等3种基元的点云滤波方法

基元是影响点云滤波精度和效率的关键因素之一。本文提出了一种基于多基元的三角网渐进加密(MPTPD)滤波方法。它包括点云分割、对象关键点提取、基于关键点的对象类别判别3个主要阶段,且3个阶段的基元分别为点、对象、关键点。使用了4景机载激光雷达和摄影测量点云数据对MPTPD、三角网渐进加密(TPD)、基于对象的三角网渐进加密(OTPD)3种滤波方法进行了性能测试。试验表明,MPTPD方法具有整体上最优的性能:在精度方面,MPTPD与OTPD两种方法的精度相当,MPTPD方法的一类误差I、总误差T比TPD的相应误差分别低约22.07%和8.44%;在效率方面,多数情况下TPD、MPTPD、OTPD方法的效率依次降低,且MPTPD的平均耗时是OTPD平均耗时的57.93%。     

应用微波遥感数据的东北地区地表温度反演

针对无源微波遥感时间分辨率高可以克服云层影响获取地表温度的问题,该文应用AMSR-E微波亮度温度数据,分别选取了基于发射率估计的单通道反演法和多通道线性拟合法反演东北地区地表温度。在原有方法的基础上提出算法改进:对单通道反演法按照植被生长周期在生长季与非生长季分别建立发射率估计方程,探究各微波通道在每种地表覆被类型的反演能力并组合反演精度最高的通道,将微波极化差异指数作为表征发射率参数加入多通道拟合方程。结果显示,获取的地表温度剔除水体和冰雪无效像元后可用性达到100%,改进后的单通道反演法均方根误差由3.58~4.6降低至2.0~3.1,在75%的区域的误差小于2 K;多通道拟合法的最终均方根误差为2.6~3.5,同样有较高精度且只使用微波亮温数据就能获取地表温度。     

基于广义3S技术的森林资源经营管理系统建设

针对我国森林资源经营管理处于比较粗放的水平,将现代测绘科学与林业相结合,构建基于广义3S技术的森林资源经营管理系统。     

基于四叉树的LOD地形简化及几何变形纠正

论述了一种基于四叉树结构LOD地形快速简化及几何变形纠正方法。通过建立四叉树结构将地形划分为规则的多个小块,利用一个递归过程遍历四叉树结构。在判断过程中本文将地形粗糙度因素加入到节点评价系统当中,有效地实现了地形的简化。对漫游过程中出现的几何变形现象引入一个混合因子到节点评价系统中,较好地解决了几何变形问题。为了更真实地反映地物地貌,本文将具有较高分辨率的航空影像叠加到DEM地形模型上,取得了较好的效果。     

基于MultiGen Creator/Vega的虚拟图书馆设计研究

以虚拟图书馆为研究对象,利用MuhiGen Creator和Vega进行建模和系统设计。本文论述了在图书馆模型建立过程中层次结构模型、细节层次结构、实例技术和纹理贴图等技术的实现,以及使用Vega及其提供的API函数的系统开发方法。研究证明,采用MuhiGen Creator和Vega将虚拟现实技术与数字图书馆结合的方案可行．并具有较大的开发空间。     

精密工程测量中强制归心装置的制作

强制归心装置在精密工程测量中被广泛应用,但在实际工作中对该装置的设计和制作无资料可查,给工程测量带来很大不便。给出该装置的全套设计图纸,并详细叙述归心装置的制作方法,据此可在施工现场就近加工制作。