强度和变形参数的变化对土工有限元计算的影响

在土工问题的数值分析中,包含变形模量E、泊松比 两个变形参数的增量线弹性模型是一种常用的计算模型,研究和掌握E和 两个参数对土工有限元计算的影响有助于分析计算成果。首先,设想固定某一个参数而观察另一个参数变化对计算结果的影响;然后,说明用强度折减有限元法分析土坡稳定安全系数时,实际上已同时考虑了变形参数的影响。可采用剪应力? xy的等值线近似形成滑动面,滑动面单元的应力水平S等于1和特征点的位移发生突变共同作为失稳判据;最后,是用强度参数为纽带探讨这两个变形参数的互相变化关系,即E愈大,则土的强度愈大,? 愈小。     

The <Emphasis Type="Italic">n</Emphasis>-alkanol paleoclimate records in two peat deposits: a comparative study of the northeastern margin of the Tibetan Plateau and Northeast China

A number of studies have revealed that the climate in the eastern margin of the Tibetan Plateau and Northeast China is sensitive to postglacial changes. Unfortunately, the link of the past climate evolution between the two regions is not well understood. In this study, two cores are analyzed to determine this link directly. The high-resolution n-alkanol distribution patterns from two typical peat sequences covering the past 16,000 cal years in the northeastern margin of the Tibetan Plateau and Northeast China, respectively, are closely examined by gas chromatograph–mass spectrometry analysis. In combination with other palaeoclimatic proxies, it is proposed that the n-alkanol average chain length and (C₂₂ + C₂₄)/(C₂₆ + C₂₈) ratio could reflect past climate changes in the two peat sequences. The n-alkanol proxies reveal several climatic intervals in the period from the last deglaciation through the Holocene. A comparison of n-alkanol records between the northeastern margin of the Tibetan Plateau and Northeast China indicates that the start and end of the warm Holocene Optimum differed at the two locations. The spatially asynchronous pattern of climatic change is possibly a result of different responses to change in solar radiation. The evolution of the Holocene paleoclimate is more consistent with changes in Northern Hemisphere solar radiation in Northeast China than on the Tibetan Plateau. The Holocene Optimum began and terminated earlier in Northeast China than in the northeastern margin of the Tibetan Plateau. Thus, the two n-alkanol proxies provide valuable insights into the regional Holocene climate and local environmental conditions.     

Interactive effects of the type of milling media and CuSO4 addition on the flotation performance of sulphide minerals from Merensky ore Part II: Froth stability

The limitations of pulp chemistry measurements in the flotation of a platinum group mineral (PGM) bearing Merensky ore were demonstrated in Part 1 of this article. In this paper the importance of the contribution of the froth structure due to changing froth stability is analysed using the batch flotation data. The effects of mild steel (MS) and stainless steel (SS) milling media and the addition of copper sulphate on the flotation performance of the sulphide minerals in Merensky ore have been evaluated in relation to the changes in stability of the froth phase. The effects of pulp chemistry and froth stability on the flotation of sulphide minerals were distinguished by using two different rate constants (k_t and k_w). The rate constant (k_w) calculated as a function of cumulative water recovery was used to describe characteristics of froth phase and k_t was calculated as a function of flotation time. The results revealed that the type of grinding media and copper sulphate addition had an interactive effect on the froth stability. While mild steel (MS) milling increased the froth stability due to the presence of hydrophilic iron hydroxides and colloidal metallic iron, the addition of copper sulphate reduced the stability, especially with stainless steel (SS) milling. Copper sulphate addition had a dual role in the flotation of Merensky ore in that it caused destabilisation of the froth zone as well as activation of selected sulphide minerals. The dominant effect was found to depend on the type of milling media and floatability of the mineral in question and this work has demonstrated the importance of using a combination of measurements to evaluate flotation performance holistically.     

Propagation of MHD body and surface waves in magnetically structured regions of the solar atmosphere

The fact that magnetically structured regions exist in the solar atmosphere has been known for a number of years. It has been suggested that different kinds of magnetohydrodynamic (MHD) waves can be efficiently damped in these regions and that the dissipated wave energy may be responsible for the observed enhancement in radiative losses. From a theoretical point of view, an important task would be to investigate the propagation and dissipation of MHD waves in these highly structured regions of the solar atmosphere. In this paper, we study the behavior of MHD body and surface waves in a medium with either a single or double (slab) magnetic interface by use of a nonlinear, two-dimensional, time-dependent, ideal MHD numerical model constructed on the basis of a Lagrangean grid and semi-implicit scheme. The processes of wave confinement and wave energy leakage are discussed in detail. It is shown that the obtained results depend strongly on the type of perturbations imposed on the interface or slab and on the plasma parameter, . The relevance of the obtained results to the heating problem of the upper parts of the solar atmosphere is also discussed.     

Pedogenic factors affecting magnetic susceptibility of the last interglacial palaeosol S1 in the Chinese Loess Plateau

The magnetic susceptibility has been used as a quantitative or semi‐quantitative proxy for reconstructing the summer monsoon intensity in the Chinese Loess Plateau based on extensive studies on climatic or/and environmental mechanisms producing the magnetic susceptibility signatures. However, the precise nature of the link between past climates and the susceptibility signatures has remained uncertain primarily due to lack of our understanding in the ?nalizing and preserving processes of the signatures. This paper attempts to examine the reliability or acceptability of this summer monsoon proxy from non‐magnetic perspectives of soil‐forming processes. We chose nine sections along two transects: one across the western part of the Chinese Loess Plateau and another across the eastern part. Several conclusions can be drawn from our analytical data. First, clay translocation within the S1 palaeosol pro?les, as indicated by ?eld‐observed clay coatings on ped faces in Bt and Bk horizons and demonstrated by laboratory‐analysed clay contents, must have moved some of the magnetic minerals downward so that the susceptibility re?ects only the post‐translocation distribution of the magnetic‐susceptibility‐producing minerals. Second, the best‐developed palaeosol S1S3 at most of the sections studied is not expressed by the magnetic susceptibility because this palaeosol developed in underlying coarse loess (L2) and coarse textures tend to lower the susceptibility. Third, carbonate concentration is normally negatively correlated with the magnetic susceptibility or simply suppresses the magnetic susceptibility peak when the susceptibility enhancement exceeds the carbonate dilution effect. To conclude, extreme caution must be observed when using magnetic susceptibility signatures to retrieve high‐resolution records of the last interglacial palaeoclimate in the Chinese Loess Plateau. Copyright © 2004 John Wiley & Sons, Ltd.     

Design of a hydraulic power take-off system for the wave energy device with an inverse pendulum

This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.     

Potential water sources for Late Quaternary Megalake Jilantai-Hetao,China, inferred from mollusk shell <Superscript>87</Superscript>Sr/<Superscript>86</Superscript>Sr ratios

Lake Jilantai-Hetao, a megalake, was formed some time before 60–50 ka, along the Great North Bend of the Yellow River. The basin is now dry, with most of the area covered by aeolian sand. We are investigating this profound hydrologic change using a number of research approaches. Paleoshorelines of this megalake are best preserved in the Jilantai area in the southwestern portion of the megalake basin. We collected aquatic mollusk shells from littoral sediments at different altitudes around Jilantai and measured their strontium isotope compositions. ⁸⁷Sr/⁸⁶Sr ratios in shell carbonates are different between the high lake phase (~1,080–1,050 m altitude) and the low lake phase (~1,044–1,030 m altitude), with a small shift in average strontium ratios to more radiogenic values during the low lake phase. Based on regional hydrology and physical geography, we conclude that water from the Yellow River was the dominant water source supplying this megalake. ⁸⁷Sr/⁸⁶Sr ratios of modern water samples suggest the Yellow River was the dominant water source during the high lake phase, but that the relative contribution of Yellow River water to the megalake was reduced, and that the relative contributions of local precipitation and groundwater increased, during the low lake phase.     

2001年昆仑山口西8.1级地震地表破裂带

2001年11月14日昆仑山口西8.1级地震是近50年来在我国大陆发生的震级最大、地表破裂最长的地震事件.地震地表破裂带全长426km,宽数米至数百米,总体走向90°～110°,具有明显的破裂分段特征,自西向东由5条次级破裂段组成.各破裂段又由若干更次级左阶或右阶斜列的破裂组成,具有自相似的分形结构特征.地震破裂带以左旋走滑为主,倾滑量很小.宏观震中区位于库赛湖东北93.0°～93.5°E一带的昆仑山南麓断层谷地内.最大地表同震左旋水平位移6.4m,最大垂直位移为4m.地表水平位移沿地震破裂带走向出现6个峰值,各峰值之间存在相对独立的衰减序列,这表明此地震具有多点破裂特征.     

山西地区的震源机制解结果

选用山西地区丰富的地震资料,利用单台小震综合断面解、4级以上地震的P波初动解、多台小震综合断面解的结果,叙述了山西地区震源机制结果的特点.得出山西地区震源机制结果有一定的复杂性,小震综合断面解的结果与华北地区的震源机制结果相似,单个地震的震源机制结果一致性较差的结论.     

Enzymatic hydrolysis of defatted mackerel protein with low bitter taste

Ultrasound-assisted solvent extraction was confirmed as a novel,effective method for separating lipid from mackerel pro-tein,resulting in a degreasing rate (DR) of 95% and a nitrogen recovery (NR) of 88.6%.To obtain protein hydrolysates with high ni-trogen recovery and low bitter taste,enzymatic hydrolysis was performed using eight commercially available proteases.It turned out that the optimum enzyme was the ‘Mixed enzymes for animal proteolysis’.An enzyme dosage of 4%,a temperature of 50℃,and a hydrolysis time of 300 min were found to be the optimum conditions to obtain high NR (84.28%) and degree of hydrolysis (DH,16.18%) by orthogonal experiments.Glutamic acid was the most abundant amino acid of MDP (defatted mackerel protein) and MDPH (defatted mackerel protein hydrolysates).Compared with the FAO/WHO reference protein,the essential amino acid chemical scores (CS) were greater than 1.0 (1.0 1.7) in MDPH,which is reflective of high nutritional value.This,coupled with the light color and slight fishy odor,indicates that MDPH would potentially have a wide range of applications such as nutritional additives,functional ingredients,and so on.