Synthetic secular theories of the planetary orbits: Regular and chaotic behavior

Modern computer technology allows dynamical astronomers to investigate the long term stability of real systems as thoroughly as ever. However, the process is not straightforward and new problems need to be solved. This work deals with only one such problem: the construction-from the numerical integration- of a secular perturbation theory that is able to describe the dynamical behavior of the system. The discussion refers to the outer planets and is based on the knowledge acquired by the author during her participation in project LONGSTOP. A digital filter is used in order to reduce the output and eliminate short periodic terms. Filtering uncovers long term variations in the semimajor axes. From the filtered output a secular perturbation theory is constructed in the assumption that the solution is regular, as secular perturbation theories can only be constructed for regular solutions. If we succeed, this means that the solution is indeed regular for the computed span of time; if not-and this can be established in a rigorous way-it has to be concluded a posteriori that the solution is not regular. The LONGSTOP 1A and 1B integrations show well that as the timespan of the integration increases it is possible to detect the non-regular behavior of the solution. This happens in the eccentricity of Saturn at the 10^–4 level.     

Estimate for radiative forcing of smoke aerosol from 2010 summer fires based on measurements in the Moscow region

Temperature and radiation effects of the 2010 summer fires are estimated on the basis of measurements at the Zvenigorod Scientific Station (ZSS) of the Obukhov Institute of Atmospheric Physics, Russian Academy of Sciences (RAS), in the Moscow region. The surface air temperature during the 2010 summer smoke varied in antiphase with the aerosol mass concentration, and the thermal radiation balance in the surface layer of the atmosphere varied in phase. Under extreme smoke of the surface layer in August 2010, the reduction in surface air temperature at ZSS has been found to reach 4 K with an increase in the downward flux of thermal radiation by an average of 20 W/m² and a decrease in the difference between upward and downward fluxes of thermal radiation by an average of 24 W/m².     

Russian studies of atmospheric electricity in 2011–2014

This review contains the most significant results of Russian studies in the field of atmospheric electricity in 2011–2014. It is part of the Russian National Report on Meteorology and Atmospheric Sciences to the International Association of Meteorology and Atmospheric Sciences (IAMAS). The report was presented and approved at the XXVI General Assembly of the International Union of Geodesy and Geophysics (IUGG).¹ The review is followed by a list of the main published works on the studies of atmospheric electricity of Russian scientists in 2011–2014.     

Transient Atmospheric Events Measured by Detectors on the Vernov Satellite

In this paper, data obtained by the Vernov satellite are discussed in comparison with the data obtained by Universitetsky–Tatiana-1, 2 satellites. The advanced instrumentation onboard the Vernov satellite improved the capabilities of the data-transmission system, providing an opportunity to acquire more detailed information on transient atmospheric events (TAEs), including a wider range of TAE photon numbers (event brightness) down to lower photon numbers, the opportunity to observe the events in ultraviolet range without the considerable inclusion of red–infrared photons (which indicates the substantial contribution of electric discharges, lightning precursors, at the altitudes of thunderstorm clouds), and the observation of TAE series at a rate of about 10–100 occurrences per second with a period from tens of seconds to several minutes.     

Error analysis of integrated water vapor measured by СIMEL photometer

Water vapor plays a key role in weather and climate forming, which leads to the need for continuous monitoring of its content in different parts of the Earth. Intercomparison and validation of different methods for integrated water vapor (IWV) measurements are essential for determining the real accuracies of these methods. CIMEL photometers measure IWV at hundreds of ground-based stations of the AERONET network. We analyze simultaneous IWV measurements performed by a CIMEL photometer, an RPG-HATPRO MW radiometer, and a FTIR Bruker 125-HR spectrometer at the Peterhof station of St. Petersburg State University. We show that the CIMEL photometer calibrated by the manufacturer significantly underestimates the IWV obtained by other devices. We may conclude from this intercomparison that it is necessary to perform an additional calibration of the CIMEL photometer, as well as a possible correction of the interpretation technique for CIMEL measurements at the Peterhof site.     

Heterogeneity influences on stream water–groundwater interactions in a gravel-dominated floodplain

ABSTRACT

Floodplains are composed of complex depositional patterns of ancient and recent stream sediments, and research is needed to address the manner in which coarse floodplain materials affect stream–groundwater exchange patterns. Efforts to understand the heterogeneity of aquifers have utilized numerous techniques typically focused on point-scale measurements; however, in highly heterogeneous settings, the ability to model heterogeneity is dependent on the data density and spatial distribution. The objective of this research was to investigate the correlation between broad-scale methodologies for detecting heterogeneity and the observed spatial variability in stream/groundwater interactions of gravel-dominated alluvial floodplains. More specifically, this study examined the correlation between electrical resistivity (ER) and alluvial groundwater patterns during a flood event at a site on Barren Fork Creek, in the Ozark ecoregion of Oklahoma, USA, where chert gravels were common both as streambed and as floodplain material. Water table elevations from groundwater monitoring wells for a flood event on 1–5 May 2009 were compared to ER maps at various elevations. Areas with high ER matched areas with lower water table slope at the same elevation. This research demonstrated that ER approaches were capable of indicating heterogeneity in surface water–groundwater interactions, and that these heterogeneities were present even in an aquifer matrix characterized as highly conductive. Portions of gravel-dominated floodplain vadose zones characterized by high hydraulic conductivity features can result in heterogeneous flow patterns when the vadose zone of alluvial floodplains activates during storm events.

EDITOR D. Koutsoyiannis; ASSOCIATE EDITOR X. Chen     

Approximating constant‐Q seismic propagation in the time domain

In this study, we investigate the accuracy of approximating constant‐Q wave propagation by series of Zener or standard linear solid (SLS) mechanisms. Modelling in viscoacoustic and viscoelastic media is implemented in the time domain using the finite‐difference (FD) method. The accuracy of numerical solutions is evaluated by comparison with the analytical solution in homogeneous media. We found that the FD solutions using three SLS relaxation mechanisms as well as a single SLS mechanism, with properly chosen relaxation times, are quite accurate for both weak and strong attenuation. Although the RMS errors of FD simulations using a single relaxation mechanism increase with increasing offset, especially for strong attenuation (Q = 20), the results are still acceptable for practical applications. The synthetic data of the Marmousi‐II model further illustrate that the single SLS mechanism, to model constant Q, is efficient and sufficiently accurate. Moreover, it benefits from less computational costs in computer time and memory.     

Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity

Abstract

The estimation and review of discharge flow rates in hydraulic works is a fundamental problem in water management. In the case of dams with large regulating capacity, in order to estimate return periods of discharge flow rates from the spillways, it becomes necessary to consider both peak flow and volume of the incoming floods. In this paper, the results of the validation for several methods of assessing design floods for spillways of dams with a large flood control capacity are presented; the validation is performed by comparing the maximum outflows (or the maximum levels reached in the reservoir) obtained from the routing of the design floods with those obtained from the routing of the historical annual maximum floods. The basin of Malpaso Dam, Mexico, is used as the case study.

Editor D. Koutsoyiannis

Citation Domínguez, M.R. and Arganis, J.M.L., 2012. Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity. Hydrological Sciences Journal, 57 (3), 460–478.     

Biodiversity in Hudson River shore zones: influence of shoreline type and physical structure

The shore zones of the Hudson River, like those of many developed waterways, are highly varied, containing a mix of seminatural and highly engineered shores. Our goal was to document the biodiversity supported by different kinds of shore zones in the Hudson. We chose six common types of shore zones, three of them ??natural?? (sand, unconsolidated rock, and bedrock), and three of them engineered (riprap, cribbing, and bulkheads). We measured selected physical characteristics (shore zone width, exposure, substrate roughness and grain size, shoreline complexity) of three examples of each of these shore types, and also sampled communities of terrestrial plants, fishes, and aquatic and terrestrial invertebrates. Community composition of most taxa differed across shore types, and frequently differed between wide, sheltered shores and narrow, exposed shores. Alien plant species were especially well represented along engineered shores. Nevertheless, a great deal of variation in biological communities was not explained by our six-class categorization of shore zones or the physical variables that we measured. No single shore type supported the highest values of all kinds of biodiversity, but engineered shore zones (especially cribbing and bulkheads) tended to have less desirable biodiversity characteristics than ??natural?? shore zones.