关于海域面积精确计算的若干问题探讨

海域面积精确计算是实现海洋功能区划的基础和关键之一。本文通过对江苏省海洋功能区划工作中误差的分析 ,并针对其产生原因 ,在地图投影的选择和坐标的变换、扫描精度的控制、配准精度的控制、图象的数字化和图形编辑等方面 ,提出了相应的优化处理方法 ,提高了海域面积计算的精度 ,将其中误差控制在估计值范围内 ,从而在实际工作中有一定的应用价值。     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

莱州湾东部滨海砂金成矿远景初步分析

本文阐述了莱州湾东部滨海砂金的物源、地貌、水动力、第四系、新构造运动和海平面变化等成矿条件以及砂金的富集特点,对该区砂金的成矿远景进行了区划和评价,初步认为该区具有良好的砂金成矿远景。     

烟威及石岛近海春季水团分析

本文使用1960—1980年春季的水文资料,以温度和盐度作为主要指标,根据聚类分析逼近温盐图解,结合对该海域地理环境特征的分析,对烟台、威海及石岛近海春季的水团结构演变及其和渔场、渔期的关系进行综合分析。结果表明,北黄海及青岛外海的冷水团,以及黄海暖水团的强度与位置的变动,对春季渔期的早迟以及渔场位置的变动,都有很大的影响。     

Improved form of wind wave frequency spectrum

The lower frequency part of the theoretical wind wave spectrum proposed by the authors (Wen et al. , 1988a, b,c) has been improved and the form of spectrum is appreciably simplified. In addition to the field data collected in the Bohai Sea region and used in the previous papers, those obtained in the Huanghai Sea, the East China Sea and the South China Sea have been employed so that the improved spectra can be verified on a more extensive observational basis. Computed results agree with the observations well. Further comparisons have been made between the proposed spectra and the JONSWAP spectrum. Though the two types of spectrum are close to each other in form, the former shows, as a whole, better agreement with the observation than the latter. By introducing an improved relation between the peak-ness factor and significant wave steepness, the spectrum contains only significant wave height and period as parameters. For spectra given in this form, the computed peak frequencies coincide approximately wit     

Protracted Environmental Issues on a Proposed Titanium Minerals Development in Kenya's South Coast

This study takes cognizance of the fact that the TIOMIN (TIOMIN Resources Inc. of Canada) project has resulted in controversy over its handling of environmental issues and especially the Environmental Impact Assessment (EIA). The authors address many of the protracted issues that have slowed the development of the mining project in Kwale. The main emphasis is on the impacts of the mining and mineral separation processes on the environment, including the governing legislation, the role of consultation and public participation, and socioeconomic issues. In their public documents TIOMIN has specified neither the type of minerals it wants to extract from the area nor their chemical composition. It is well known, however that the titanium minerals and zircon targeted have impurities of iron, thorium and uranium. In the absence of an Environmental Management Plan, the effects of stockpiling radioactive wastes and other impurities that could possibly lead to environmental degradation in both the terrestrial and marine environments have not been publically addressed. The measures proposed to mitigate ecological damage as a result of the establishment of a minerals processing plant in the area seem inadequate. Pollution resulting from accidental spillage or breakage could have significant impact on marine life and residents living near the mining site. Other issues that have not been addressed satisfactorily pertain to the use of surface and underground water. The area already faces a huge water deficit and the calculations presented on aquifer recharge and stream flow rates do not indicate the large quantities of water that would be required in the mineral processing plant. The project, if approved in its present state, risks violation of international conventions. Furthermore, it could cause a conflict between Kenya and Tanzania in the event of an oil spill at the proposed ship loading facility at Shimoni. The proposed mining area includes the district's most fertile land, is home to many fisherfolk and is a major tourist destination. An analysis of the effects of this project on other available opportunities must be thoroughly understood to ascertain the economic and environmental benefits and costs of the mining venture. The proposed compensation rate of $1,000 per acre, for resettlement for example, appears to be grossly inadequate. Compensation should take into account family size and structure family assets and the cost of relocation.     

Action mechanism of geotextile-reinforced cushion under breakwater on soft ground

Various measures including material experiments, centrifuge modeling tests and FEM numerical analyses were performed to study systematically the action mechanism of the geotextile-reinforced cushion under breakwater on soft ground and the effects of the strata characterization and the reinforcement condition on the stability of the breakwater-ground system. In the aspect of controlling the deformation, the geotextile-reinforced cushion under breakwater constrains the lateral displacement of both the embankment and the ground. From the viewpoint of stress, the reinforcement suppressed the range of high stress level in the system. In general, the weaker the ground is and the greater the modulus of the geotextile is, the more effective the reinforcement is. The tensile force in the geotextile is greater in the range of the main part of the embankment.     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.