Cenozoic volcanic rocks in the Belog Co area, Qiangtang, northern Tibet, China： Petrochemical evidence for partial melting of the mantle-crust transition zone

Neogene volcanic rocks in the Belog Co area, Qiangtang, northern Tibet, are represented by a typical intermediate-basic and intermediate alkaline rock association, with latite-trachyte as the main rock type. The results of chemical analysis are: SiO2=52%–62%, Al2O3>15%, Na2O/K2O>1 and MgO<3.30%. In addition, the volcanic rocks are LREE-enriched with LREE/HREE=10–13, (La/Yb)N=15–19, and show a weak negative Eu anomaly with δEu=0.71–0.89. The close relationship between Mg# and SiO2 and the co-variation of the magmatophile elements and ultra-magmatophile elements such as La/Sm-La and Cr-Tb indicate that this association of volcanic rocks is the product of comagmatic fractional crystallization. The rock association type and lower Sm/Yb values (Sm/Yb=3.23–3.97) imply that this association of volcanic rocks should have originated from partial melting of spinel lherzolite in the lithospheric mantle. On the other hand, the weak negative Eu anomaly and relative depletion in Nb, Ta and Ti reflect the features of terrigenous magma. So the Neogene Belog Co alkaline volcanic rocks should be the result of partial melting of the special crust-mantle transition zone on the Qinghai-Tibet Plateau.     

Geology and rare-earth element geochemistry of highly evolved, molybdenite-bearing granitic plutons, Southeastern Desert, Egypt

The field relations, mineralogy, and major and trace elements (including REE analyses of whole-rock samples and minerals) of granites and their associated molybdenite uranium mineralized aplites in Southeastern Desert, Egypt, have been studied. The granites are leucocratic and mostly peraluminous in nature with muscovite increasing at the expense of biotite. The chemical and mineralogical characteristics of the granitic rocks indicate that their melts originated from the LILE-enriched mantle wedge by partial melting and are contaminated by crustal melts, followed by thermogravitational processes. Leucogranites with higher Na2O/K2O ratios from Um Dargag and Um Maiat crystallized under H2O-saturated equilibrium conditions in which the exsolved vapor continuously migrated away. The REE patterns of the granites studied are characterized by LREE enrichments and negative Eu anomalies. In comparison, the potassic aplites and the more sodic leucogranites are depleted in LREE, enriched in HREE and show more remarkable negative Eu anomalies. Allanite and monazite are the most important REE carriers in the granites. These minerals are strongly enriched in LREE, whereas fluorite and xenotime, which are more abundant in the aplites, are enriched in HREE. The average Lu/Ce ratio represents the fractionation trend with respect to HREE. It is 0.71 for radioactive fluorite, and it increases to 1.22 for non-radioactive fluorite. The high REE contents of molybdenite represent re-deposition of the mobilized Mo and REE. Due to the strong control of accessory minerals, the REEs are of limited use in petrogenetic modelling of highly evolved granitic systems.     

Vulnerability assessment in a volcanic risk evaluation in Central Mexico through a multi-criteria-GIS approach

The Valley of Toluca is a major industrial and agricultural area in Central Mexico, especially the City of Toluca, the capital of The State of Mexico. The Nevado de Toluca volcano is located to the southwest of The Toluca Basin. Results obtained from the vulnerability assessment phase of the study area (5,040 km² and 42 municipalities) are presented here as a part of a comprehensive volcanic risk assessment of The Toluca Basin. Information has been gathered and processed at a municipal level including thematic maps at 1:250,000 scale. A database has been built, classified and analyzed within a GIS environment; additionally, a Multi-Criteria Evaluation (MCE) approach was applied as an aid for the decision-making process. Cartographic results were five vulnerability maps: (1) Total Population, (2) Land Use/Cover, (3) Infrastructure, (4) Economic Units and (5) Total Vulnerability. Our main results suggest that the Toluca and Tianguistenco urban and industrial areas, to the north and northeast of The Valley of Toluca, are the most vulnerable areas, for their high concentration of population, infrastructure, economic activity, and exposure to volcanic events.     

Mineralogy and heavy metal content in sediments from Rio Gato,Carelmapu and Cucao,Southern Chile

In southern Chile, with a mild and rainy climate, high levels of heavy metals have been detected in many gold placer deposits. Many of the contaminants pose risks to human life, and consequently damage the trofic chain in this environment. The study zones selected correspond to the handicraft gold-bearing sands of Rio Gato (Los Muermos), Carelmapu and Cucao. These are all located in the X Region of “Los Lagos” in Chile. The type of methodology used in the characterization of the associated mineralization consists of testing each representative sample with a grain size distribution, statistical parameter analysis and a mineralogical analysis, using a binocular magnifying glass, a petrographic microscope, XRD and SEM/EDX. The chemical composition was defined by means of X ray fluorescence and micro-chemical analysis. The results of the study about sediments in southern Chile are presented. The major concentrations of heavy minerals are generally located in areas of dynamic river energy. In the samples, more than 70% of the heavy minerals were distributed among grain sizes corresponding to thin sand with good grain selection (meshes of 0.25–0.06 mm). The main mineral phases present in the analysed samples were gold, zircon, olivine, ilmenite, hornblende, hypersthene, hematite, garnet, chromite, chlorite, augite, amphibolitic-epidote, etc. The main heavy metals found as a result of the study were mercury, lead, cadmium, chrome, tellurium, indium, zinc, cobalt, copper, platinum, gold, etc., and as well some less common elements like cerium, praseodymium, gadolinium, neodymium, samarium and lanthanum. This research work is only a starting point for carrying out a risk probability mapping of heavy metals and the mineralogy of the Cucao, Carelmapu and Rio Gato gold-bearing sands.     

XMCD at Fe L<Subscript>2,3</Subscript> edges,Fe and S K edges on Fe<Subscript>7</Subscript>S<Subscript>8</Subscript>

Pyrrhotite (Fe₇S₈) is a natural iron sulphide that can participate in rock magnetisation. Its electronic structure is not yet surely described. X-ray magnetic circular dichroism (XMCD) at Fe L_2,3 edges on Fe₇S₈, coupled with multiplet calculations, shows that iron is present only as Fe²⁺ in this magnetic iron sulphide. It reveals a strong magnetic orbital moment. XMCD at Fe and S K edges shows the quite strong polarization of both Fe and S in Fe₇S₈.     

Advective heat transfer and fabric development in a shallow crustal intrusive granite — the case of Proterozoic Vellaturu granite,south India

Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.     

∼3,850 Ma tonalites in the Nuuk region,Greenland: geochemistry and their reworking within an Eoarchaean gneiss complex

The Eoarchaean (>3,600 Ma) Itsaq Gneiss Complex of southern West Greenland is dominated by polyphase orthogneisses with a complex Archaean tectonothermal history. Some of the orthogneisses have c. 3,850 Ma zircons, and they vary from rare single phase metatonalites to more common complexly banded migmatites. This is due to heterogeneous strain, in situ anatexis and granitic veining superimposed during younger tectonothermal events. In the single-phase tonalites with c. 3,850 Ma zircon, oscillatory-zoned prismatic zircon is all 3,850 Ma old, but shows patchy ancient loss of radiogenic Pb. SHRIMP spot analyses and laser ablation ICP-MS depth profiling show that thin (usually < 10 μm) younger (3,660–3,590 Ma and Neoarchaean) shells of lower Th/U metamorphic zircon are present on these 3,850 Ma zircons. Several samples with this simple zircon population occur on islands near Akilia. In contrast, migmatites usually contain more complex zircon populations, with often more than one generation of igneous zircon present. Additional zircon dating of banded gneisses across the Complex shows that samples with c. 3,850 Ma igneous zircon are not just a phenomenon restricted to Akilia and adjacent islands. For example, migmatites from Itilleq (c. 65 km from Akilia) contain variable amounts of oscillatory-zoned 3,850 Ma and 3,650 Ma zircon, interpreted, respectively, as the rock age and the time of crustal melting under Eoarchaean metamorphism. With only 110–140 ppm Zr in the tonalites and likely magmatic temperatures of >850°C, zircon solubility–melt composition relationships show that they were only one-third saturated in zircon. Any zircon entrained in the precursor magmas would thus have been highly soluble. Combined with the cathodoluminesence imaging, this demonstrates that the c. 3,850 Ma oscillatory zoned zircon crystallised out of the melt and hence gives a magmatic age. Thus the rare well-preserved tonalites and palaeosome in migmatites testify that c. 3,850 Ma quartzo–feldspathic rocks are a widespread (but probably minor) component in the Itsaq Gneiss Complex. C. 3,850 Ma zircon with negative Eu anomalies (showing growth in felsic systems) also occurs as detrital grains in rare c. 3,800 Ma metaquartzites and as inherited grains in some 3,660 Ma granites (sensu stricto). These demonstrate that still more c. 3,850 Ma rocks were present, but were recycled into Eoarchaean sediments and crustally derived granites. The major and trace element characteristics (e.g. LREE enrichment, HREE depletion, low MgO) of the best-preserved c. 3,850 Ma rocks are typical of Archaean TTG suites, and thus argue for crust formation processes involving important contributions from melting of hydrated mafic crust to the earliest Archaean. Five c. 3,850 Ma tonalites were selected as the best preserved on the basis of field criteria and zircon petrology. Four of these samples have overlapping initial ɛ_Nd (3,850 Ma) values from +2.9 to +3.6± 0.5, with the fourth having a slightly lower value of +0.6. These data provide additional evidence for a markedly LREE-depleted early terrestrial mantle reservoir. The role of c. 3,850 Ma crust should be considered in interpreting isotope signatures of the younger (3,800–3,600 Ma) rocks of the Itsaq Gneiss Complex. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Analysis of kinematic seismic response of tapered piles

In the present work, a two-phase analysis is used to assess the lateral movement of a tapered pile due to kinematic seismic loading resulted from earthquakes. First, the free-field horizontal displacement of the ground due to earthquake is estimated using available theory of wave propagation. Second, these estimated soil movements are imposed on the taper pile in a closed-form solution to compute the pile response. The governing differential equation for an arbitrary pile segment is obtained, which includes the free-field horizontal movement estimated from the first phase. The equation is solved explicitly to obtain the horizontal deflection. Parametric studies show that tapered piles tend to be more flexible than uniform piles of the same volume and length under earthquake loading, which is soundly interesting.     

Application of integrated methods in mapping waste disposal areas

An integrated suite of environmental methods was used to characterize the hydrogeological, geological and tectonic regime of the largest waste disposal landfill of Crete Island, the Fodele municipal solid waste site (MSW), to determine the geometry of the landfill (depth and spatial extent of electrically conductive anomalies), to define the anisotropy caused by bedrock fabric fractures and to locate potential zones of electrically conductive contamination. A combination of geophysical methods and chemical analysis was implemented for the characterization and management of the landfill. Five different types of geophysical surveys were performed: (1) 2D electrical resistance tomography (ERT), (2) electromagnetic measurements using very low frequencies (VLF), (3) electromagnetic conductivity (EM31), (4) seismic refraction measurements (SR), and (5) ambient noise measurements (HVSR). The above geophysical methods were used with the aim of studying the subsurface properties of the landfill and to define the exact geometrical characteristics of the site under investigation.     

Performance of surface footing on geocell-reinforced soft clay beds

This paper presents the results of laboratory model tests carried out to develop an understanding of the behaviour of geocell-reinforced soft clay foundations under circular loading. Natural silty clay was used in this study. The geocells were prepared using biaxial polymer grid. The performance of the reinforced bed is quantified using non-dimensional factors i.e., Bearing capacity improvement factor (I_f) and Percentage reduction in footing settlement (PRS). The test results demonstrate that the geocell mattress redistributes the footing load over a wider area thereby improving the performance of the footing. The load carrying capacity of the clay bed is increased by a factor of up to about 4.5 times that of unreinforced bed. From the pressure-settlement responses, it is observed that the geocell-reinforced foundation bed behaves as a much stiffer system compared to the unreinforced case indicating that a substantial reduction in footing settlement can be achieved by providing geocell reinforcement in the soft clay bed. The maximum reduction in footing settlement obtained with the provision of geocell mattress of optimum size placed close to the footing is around 90%. Further improvement in performance is obtained with provision of an additional planar geogrid layer at the base of the geocell mattress.