Classifying chalk microtextures: Sedimentary versus diagenetic origin (Cenomanian–Santonian,Paris Basin,France)

Microtexture describes the type of particles and their arrangement in matrix samples at scanning electron microscopy scale. Although a microtexture classification exists for micritic limestone, it cannot be directly applied to chalk. This study therefore proposes a classification of chalk microtextures and discusses the origin of microtexture variability. Chalk was sampled at thirteen spatio‐temporal locations along the coastline of northern France (Cenomanian–Santonian). Four criteria are defined to describe, characterize and determine chalk matrix microtexture: (i) mineralogical content; (ii) biogenic fraction; (iii) micritic fraction; and (iv) cement fraction. From these criteria, two major groups are defined: Pure Chalk Microtexture Group, with seven classes, and Impure Chalk Microtexture Group, divided into two subgroups: Argillaceous Microtexture with four classes and Siliceous Microtexture with two classes. Microtexture variability is related both to initial sedimentation and to diagenesis. Sedimentological conditions (for example, climate and distance from shore) affect chalk composition (carbonate content and type of insoluble particles), thus influencing microtexture. Changes in Pure Chalk Microtexture are the result of increasing diagenetic intensity. This classification can also be used to characterize the microtexture of subsurface chalk reservoirs. Reservoir quality depends on the petrophysical and mechanical properties of reservoir rocks, which can be better understood by exploring their sedimentary and diagenetic history, revealed by the study of chalk microtexture variability.     

Sources and chronology of fifteen elements in the sediments of lakes affected by metal deposition in a mining area

Sources and chronologies of metal contamination were studied in sediment cores of three lakes of the Rouyn-Noranda mining area (Québec, Canada) affected by atmospheric deposition of anthropogenic contaminants. One of the three lakes also received acid mine drainage. The sediments were dated using ²¹⁰Pb and ¹³⁷Cs and analysed for stable Pb isotope ratios and for total concentrations of 15 elements (Ag, Al, Au, Ca, Cu, Cd, Fe, Hg, Mn, Ni, P, Pb, S, Ti, Zn). Stable lead isotopic signatures helped to determine the quantitative contributions of different industrial Pb sources to our sampling sites. This source apportionment showed the dominant influence of the Rouyn-Noranda copper smelter in airborne Pb emissions for the decades following 1926, when industrialization began in the region. The smelter source had a low ratio of ²⁰⁶Pb/²⁰⁷Pb ranging between 0.90 and 1.05, as typical of the Abitibi Archean sulphides. The relationships between element (metal) sedimentary fluxes and anthropogenic Pb fluxes allowed us to infer the origin of the anthropogenic source. These relationships strongly suggest that the copper smelter was (and may still be) an atmospheric source of Cd, Cu, Pb, Zn, Ag and Hg to the surrounding lakes. Our study indicates that the efforts made by the Rouyn-Noranda copper smelter to reduce airborne emissions of metals have been translated in reduced atmospheric metal loadings to the surrounding lakes.     

Acoustic Emissions Monitoring during Inelastic Deformation of Porous Sandstone: Comparison of Three Modes of Deformation

In some reservoirs, large deformations can occur during oil or gas production because of the effective stress change. For very porous rocks, these production operations can be sufficient to cause inelastic deformation and irreversible damage. Rock formations can undergo deformation by different mechanisms, including dilatancy or pore collapse. In the laboratory, it has been shown that the inelastic deformation and failure mode of porous rocks are pressure sensitive. Indeed, when subjected to an overall compressive loading, a porous rock may fail by shear localization, compaction localization, or by cataclastic compaction. Acoustic emission (AE) records provide important information to understand the failure mode of rocks: the spatial evolution of damage as well as the source mechanisms can be followed using this technique. In this paper, we present three different laboratory axisymmetric compression experiments, performed on Bleurswiller sandstone, which enable us to compare the acoustic emission signature of these three modes of deformation. Our data show that compaction localization and cataclastic compaction are characterized by similar acoustic signatures (in terms of AE sources characteristics and evolution of AE number), in comparison to the acoustic signature from shear localization. This implies similar micromechanisms involved during compaction bands formation and cataclastic compaction.     

Variability in the annual cycle of vertical particulate organic carbon export on Arctic shelves: Contrasting the Laptev Sea,Northern Baffin Bay and the Beaufort Sea

The ongoing regression of sea ice cover is expected to significantly affect the fate of organic carbon over the Arctic continental shelves. Long-term moored sediment traps were deployed in 2005–2006 in the Beaufort Sea, Northern Baffin Bay and the Laptev Sea to compare the annual variability of POC fluxes and to evaluate the factors regulating the annual cycle of carbon export over these continental shelves. Annual POC fluxes at 200 m ranged from 1.6 to 5.9 g C m⁻² yr⁻¹ with the highest export in Northern Baffin Bay and the lowest export over the Mackenzie Shelf in the Beaufort Sea. Each annual cycle exhibited an increase in POC export a few weeks before, during, or immediately following sea ice melt, but showed different patterns over the remainder of the cycle. Enhanced primary production, discharge of the Lena River, and resuspension events contributed to periods of elevated POC export over the Laptev Sea slope. High POC fluxes in Northern Baffin Bay reflected periods of elevated primary production in the North Water polynya. In the Beaufort Sea sediment resuspension contributed to most of the large export events. Our results suggest that the outer shelf of the Laptev Sea will likely sustain the largest increase in POC export in the next few years due to the large reduction in ice cover and the possible increase in the Lena River discharge. The large differences in forcing among the regions investigated reinforce the importance of monitoring POC fluxes in the different oceanographic regimes that characterize the Arctic shelves to assess the response of the Arctic Ocean carbon cycle to interannual variability and climate change.     

Mapping rates associated with polygons

Suppose that geographic data under investigation are rates associated with polygons. For example, disease incidence, mortality, and census undercount data may be displayed as rates. Spatial analysis of data of this sort can be handled very naturally through Bayesian hierarchical statistical modeling, where there is a measurement process at the first level, an explanatory process at the second level, and a prior probability distribution on unknowns at the third level. In our paper, we shall feature epidemiological data, specifically disease-incidence rates, and the “polygons” referred to in the title are typically states or counties.     

An epeiric ramp: low-energy, cool-water carbonate facies in a Tertiary inland sea, Murray Basin, South Australia

The Murray Supergroup records temperate‐water carbonate deposition within a shallow, mesotrophic, Oligo‐Miocene inland sea protected from high‐energy waves and swells of the open ocean by a granitic archipelago at its southern margin. Rocks are very well preserved and exposed in nearly continuous outcrop along the River Murray in South Australia. Most facies are rich in carbonate silt, contain a background assemblage of gastropods (especially turritellids) and infaunal bivalves, and are packaged on a decimetre‐scale defined by firmground and hardground omission surfaces. Bioturbation is pervasive and overprinted, resulting in rare preservation of physical sedimentary structures. Facies are grouped into four associations (large foraminiferan–bryozoan, echinoid–bryozoan, mollusc and clay facies) interpreted to represent shallow‐water (<50 m) deposition under progressively higher trophic resource levels (from low mesotrophy to eutrophy), and restricted marine conditions from relatively offshore to nearshore regions. A large‐scale shift from high‐ to low‐mesotrophic conditions within lower Miocene strata reflects a change in climate from wet to seasonally dry conditions and highlights the influence terrestrially derived nutrients had upon this shallow, land‐locked sea. Overall, low trophic resource levels during periods of seasonally dry climate resulted in a deepening of the euphotic zone, a widespread proliferation of foraminiferan photozoan fauna and a relatively high carbonate productivity. Inshore, heterozoan facies became progressively muddier and restricted towards the shoreline. In contrast, periods of wet climate led to rising trophic resource levels, resulting in a shallowing of the euphotic zone, a decrease in epifaunal and seagrass cover and widespread development of a mostly heterozoan biota dominated by infaunal echinoids. Rates of carbonate production and accumulation were relatively low. The Murray Basin is best described as an epeiric ramp. Wide facies belts developed in a shallow sea on a low‐angled slope reaching many hundreds of kilometres in length. Grainy shoal and back‐barrier facies were absent. Internally generated waves impinged the sea floor in offshore regions and, because of friction along a wide and shallow sea floor, created a low‐energy expanse of waters across the proximal ramp. Storms were the dominating depositional process capable of disrupting the entire sea floor.     

Decadal evolution of a degassing magma reservoir unravelled from fire fountains produced at Etna volcano (Italy) between 1989 and 2001

Between 1989 and 2001, five eruptions at Etna displayed a regular alternation between repose periods and episodes rich in gas, termed quasi-fire fountains and consisting of a series of Strombolian explosions sometimes leading to a fire fountain. This behaviour results from the coalescence of a foam layer trapped at the top of the reservoir which was periodically rebuilt prior to each episode (Vergniolle and Jaupart, J Geophys Res 95:2793–2809, 1990). Visual observations of fire fountains are combined with the foam dynamics to estimate the five degassing parameters characteristic of the degassing reservoir, i.e. the number of bubbles, gas volume fraction, bubble diameter, reservoir thickness and reservoir volume. The study of decadal cycles of eruptive patterns (Allard et al., Earth Sci Rev 78:85–114, 2006) suggests that the first eruption with fire fountains occurred in 1995 while the last one happened in 2001. The number of bubbles and the gas volume fraction increase smoothly from the beginning of the cycle (1995) to its end (2001). The increasing number of bubbles per cubic metre, from 0.61–20×10⁵ to 0.1–3.4×10⁹, results from cooling of the magma within the reservoir. The simultaneously decreasing bubble diameter, from 0.67–0.43 to 0.30–0.19 mm, is related to the decreasing amount of dissolved volatiles. Meanwhile, the thickness and the volume of the degassing reservoir diminish, from values typical of the magma reservoir to values characteristic of a very thin bubbly layer, marking the quasi-exhaustion of volatiles. The magma reservoir has a slender vertical shape, with a maximum thickness of 3,300–8,200 m and a radius of 240 m (Vergniolle 2008), making its detection from seismic studies difficult. Its volume, at most 0.58–1.4 km³, is in agreement with geochemical studies (0.5 km³) (Le Cloarec and Pennisi, J Volcanol Geotherm Res 108:141–155, 2001). The time evolution of both the total gas volume expelled per eruption, and the inter-eruptive gas flux results from the competition between the increasing number of bubbles and the decreasing bubble diameter. The smooth temporal evolution of the five degassing parameters also points towards bubbles being produced by a self-induced mechanism within the magma reservoir rather than by a magmatic reinjection prior to each eruption. The decadal cycles are therefore initiated by a magmatic reinjection, in agreement with a typical return time of 14–80 years (Albarède 1993). Hence, the 1995 eruption results from a fresh magma being newly emplaced while the magma from the following eruptions is progressively depleted in volatiles species until reaching a state of quasi-exhaustion in 2001. A magmatic reinjection of 0.13–0.6 km³ every few decades is sufficient to explain the expelled gas volume, including SO₂. A scenario is also proposed for the alternation between gas-rich summit eruptions and gas-poor flank eruptions which are observed during decadal cycles. The scenario proposed for Etna could also be at work at Piton de la Fournaise and Erta ’Ale volcanoes.     

Biological and ecological mechanisms for overcoming sperm limitation in invasive dreissenid mussels

Many broadcast-spawning benthic invertebrates are subject to sperm limitation yet achieve high population densities, as for example dreissenid mussels (Dreissena polymorpha and Dreisssena bugensis) that were introduced into the Laurentian Great Lakes. The question remains whether biological or ecological/physical mechanisms reduce sperm limitation. Gamete dilution/longevity experiments were undertaken to determine whether dreissenid mussels are subject to sperm limitation, and computational fluid dynamic modeling was used to determine the potential influence of bottom roughness on sperm dilution in nature. Results indicated that dreissenid mussels may be sperm limited, but the extent to which sperm dilution affects them is lower than what was reported for other broadcast spawning invertebrates. Importantly, model mussel clusters influenced external fertilization by retaining sperm in downstream eddies but allowing downstream transport from one cluster to another. This, in addition to high sperm potency at low sperm concentrations, may help to explain the success of dreissenid mussels as invasive species.