An Engineering Approach to Seismic Risk Management in Hardrock Mines

The problem of mining-induced seismicity in hardrock mines has become significant as underground mines from around the world are pushing production to deeper levels. At many mines, the risk associated with large seismic events and rockburst damage must be managed to ensure the safety of mine workers and minimise production losses. In this paper, an engineering approach to seismic risk management is described. It relies on accepted risk management techniques, which principally include the identification and understanding of hazards from which risk mitigation measures can be developed. This is achieved using simple but effective analysis techniques of high resolution microseismic data.     

Tectonic implications of new single zircon Pb-Pb evaporation data in the Lossogonoi and Longido ruby-districts,Mozambican metamorphic Belt of north-eastern Tanzania

Three single zircon Pb-Pb evaporation dating studies were performed on felsic orthogneisses and migmatites from the Longido and Lossogonoi ruby districts, Mozambique Belt of north-eastern Tanzania, in order to better constrain the geological setting of gemstone mineralizations. Igneous emplacement ages of protoliths ranging between 2636 and 2448 Ma document for the first time the presence of a Neoarchean to Lower Paleoproterozoic (Siderian) basement reworked in the Late Neoproterozoic Mozambique Belt of north-eastern Tanzania. This ancient crust of unknown dimension is well documented farther south, but also in south-eastern Kenya. A shearing event under high-grade amphibolite facies conditions, postdating the Pan-African metamorphic peak at 640 Ma and following nappes emplacement is demonstrated at ca. 610 Ma from metamorphic zircons of Lossogonoi district. In Lossogonoi district, ruby crystallizes during this last stage of deformation.     

Groundwaters of the Central Ethiopian Rift: diagnostic trends in trace elements, δ<Superscript>18</Superscript>O and major elements

The Ethiopian Rift (a major portion of the Great East African Rift) is characterized by a narrow elongated depression bounded by highlands from both sides. This topographic configuration leads to a monsoon redistribution which resulted in an arid rift floor and humid high rainfall highlands. The rifting and associated volcanism also caused a thinning of the crust and facilitates influx of CO₂ and other mantle gases as diffuse sources or along faults from deeper sources. Groundwaters in the rift floor are usually of high mineral content (high F, U, As and salinity) while those on the plateau are of low mineral content. Among many factors, groundwater availability and quality in the rift floor aquifers is the function of their connection to the aquifers in the high rainfall plateau and the residence time of groundwater prior to reaching the rift floor. This entails the need for addressing one basic hydrologic question in such a setting: at what depth and rate does recharge from the high rainfall highland reach the lowland rift aquifers? This study uses spatial variations in trace elements and relates them to ¹⁴C variations, thereby investigating the suitability of using trace elements as proxies for residence time estimation of groundwaters of relatively short (1,000–2,000 years) residence time. This work also investigates the behavior of trace element trends along the groundwater flow path in a rifted setting and compares them with such trends in sedimentary aquifers elsewhere. The comparison shows a clear difference in behavior of trace elements along the groundwater flow path when compared with such variations in big sedimentary basins with no prominent rifting and volcanism, suggesting the need of calibrating the relation between trace elements and any direct residence time indicators. An integrated use of major elements, trace elements, and environmental isotopes reveals that the main recharge of the aquifers originates from mountain blocks and that recharge takes place via fractures with no evidence of evaporation prior to recharge. Redox processes appear to play a limited role in trace element geochemistry of groundwaters in the region. Progressive trends in trace element composition along the groundwater flow path suggest continuous groundwater flow from the plateau.     

Porosity and mineralogy evolution during the decay process involved in the Chellah monument stones

The objective of this work is to study the decay process involved in the historical Roman Chellah located in the Rabat city (Morocco). This monument is made up of porous calcarenite stone. Several samples, taken from altered and unaltered blocks, were analyzed by the water saturation, the mercury intrusion porosimetry techniques and using the scanning electron microscopy coupled to energy dispersive X-ray spectrometer (SEM–EDX). To perform a reliable chemical analysis, some samples were also analyzed by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The mercury porosimetry results show a bimodal porous network for this porous material, the deterioration process of these stones involved an increase in porous volume of about 2%. The lowest porosity observed in the unaltered block is connected to the presence of sparitic cement which causes a partial inter-granular porosity clogging. The highest porosity of the deteriorated block without crust is due to the increase in inter-granular space. SEM photographs of the unaltered sample show the presence of the porous primary grains, of ovoid forms and millimeter-length sizes, and of the secondary grains, of rhombohedric forms and micro size. Porosity is essentially located between the primary grains and can be completely clogged by secondary precipitations. Various forms of deterioration are observed on the altered samples such as the dissolution of the secondary grains edges, wells of dissolution and also the presence of argillaceous residues on the surface. This last was also detected by the ICP-AES and EDX analysis which show an increase of the silicon and aluminum contents toward the surface.     

Burgundy regional climate change and its potential impact on grapevines

ARPEGE general circulation model simulations were dynamically downscaled by The Weather Research and Forecasting Model (WRF) for the study of climate change and its impact on grapevine growth in Burgundy region in France by the mid twenty-first century. Two time periods were selected: 1970–1979 and 2031–2040. The WRF model driven by ERA-INTERIM reanalysis data was validated against in situ surface temperature observations. The daily maximum and minimum surface temperature (T_max and T_min) were simulated by the WRF model at 8?×?8?km horizontal resolution. The averaged daily T_max for each month during 1970–1979 have good agreement with observations, the averaged daily T_min have a warm bias about 1–2?K. The daily T_max and T_min for each month (domain averaged) during 2031–2040 show a general increase. The largest increment (~3?K) was found in summer. The smallest increments (<1?K) were found in spring and fall. The spatial distribution of temperature increment shows a strong meridional gradient, high in south in summer, reversing in winter. The resulting potential warming rate in summer is equivalent to 4.7?K/century under the IPCC A2 emission scenario. The dynamically downscaled T_max and T_min were used to simulate the grape (Pinot noir grape variety) flowering and véraison dates. For 2031–2040, the projected dates are 8 and 12?days earlier than those during 1970–1979, respectively. The simulated hot days increase more than 50% in the two principal grapevine regions. They show strong impact on Pinot noir development.     

Uncertainties in simulating regional climate of Southern Africa: sensitivity to physical parameterizations using WRF

This study aims at quantifying seasonal biases of regional climate model outputs during southern African summer, against a dense in situ measurement network (daily rain-gauge and surface air temperature records, and 12?h UTC radiosondes), and uncertainties associated with some physical parameterizations. Using the non-hydrostatic Advanced Research Weather Forecast (WRF) laterally forced by ERA40 reanalysis, twenty-seven experiments configured with three schemes of cumulus (CU), planetary boundary layer (PBL) and microphysics (MP), are performed at 35?km horizontal resolution during the core of a summer rainy season (December 1993 to February 1994 season) representative of the South African rainfall climatology. WRF simulates accurately seasonal large-scale rainfall patterns, as well as seasonal gradients of South African rainfall and 2-m temperature, and seasonal vertical profiles of the air temperature and humidity. However seasonal biases fluctuate strongly from an experiment to another, denoting considerable uncertainties generated by the physical package. Rainfall amounts are the most sensitive parameter to the tested schemes. Their geography, intensity, and intraseasonal characteristics are predominantly sensitive to CU schemes, and much less to PBL and MP schemes. Some CU-PBL combinations produce additive effects, which can dramatically either reduce or increase biases. Satisfactory configurations are found for South African climate, which would not have been possible without testing numerous physical parameterizations.     

Thermo‐tectonic evolution of the south‐central Pyrenees from rifting to orogeny: insights from detrital zircon U/Pb and (U‐Th)/He thermochronometry

Constraining the thermal and denudational evolution of continental margins from extensional episodes to early orogenic stages is critical in the objective to better understand the sediment routing during the growth of orogenic topography. Here, we report 160 detrital zircon U/Pb ages and 73 (U‐Th)/He ages from Albian, Upper Cretaceous and Eocene sandstones from the south‐central Pyrenees. All samples show dominant zircon U/Pb age peaks at 310–320 Ma, indicating a primary contribution from Variscan granites of the central Pyrenean Axial Zone. A secondary population at 450–600 Ma documents zircon grains sourced from the eastern Pyrenees. Zircon (U‐Th)/He ages recovered from older samples document, a Triassic age peak at ca. 241 Ma, corresponding to denudation coeval with the initiation of Atlantic rifting. An Early Cretaceous cooling event at ca. 133 Ma appears consistent with rift‐related exhumation and thermal overprint on the Iberian margin. The (U‐Th)/He age peaks from ca. 80 Ma to ca. 68 Ma with decreasing depositional ages are interpreted to reflect the southward‐migrating thrust‐related exhumation on the pro‐wedge side of the Pyrenean orogen. The increase in lag times, from ca. 15 Ma in the Tremp Formation (ca. 65 Ma) to 28 Ma in the Escanilla Formation (ca. 40 Ma), suggests decreasing exhumation rates from 0.4 km Myr^–1 to 0.2 km Myr^–1. The apparent inconsistency with convergence rates is used to infer that rocks cooled at 68 Ma may have resided in the crust before final exhumation to the surface. Finally, the cooling event observed at 68 Ma provides support to the inferred acceleration of convergence, shortening and exhumation during Late Cretaceous times.     

High Resolution DEM Generation in High‐Alpine Terrain Using Airborne Remote Sensing Techniques

Up‐to‐date and accurate digital elevation models (DEMs) are essential for many applications such as numerical modeling of mass movements or mapping of terrain changes. Today the Federal Department of Topography, swisstopo, provides Digital Terrain Models (DTMs) and Digital Surface Models (DSMs) derived from airborne LiDAR data with a high spatial resolution of 2 m covering the entire area of Switzerland below an elevation of 2000 m a.s.l.. However, above an elevation of 2000 m a.s.l., which is typical for high‐alpine terrain, the best product available is the a DTM with a spatial resolution of 25 m. This spatial resolution is insufficient for many applications in complex terrain. In this study, we investigate the quality of DSMs derived from opto‐electronic scanner data (ADS80; acquired in autumn 2010) using photogrammetric image correlation techniques based on the multispectral nadir and backward looking sensor data. As reference, we take a high precision airborne LiDAR data set with a spatial resolution of ca. 0.5 m, acquired in late summer 2010, covering the Grabengufer/Dorfbach catchment near Randa, VS. We find the deviations between the two datasets are surprisingly low. In terrain with inclination angles of less than 30° the RMSE is below 0.5 m. In extremely steep terrain of more than 50° the RMSE goes up to 2 m and outliers increase significantly. We also find dependencies of the deviations on illumination conditions and ground cover classes. Finally we discuss advantages and disadvantages of the different data acquisition methods.     

Chemical characteristics of groundwater around two massive sulphide deposits in an area of previous mining contamination, Iberian Pyrite Belt, Spain

A detailed chemical study of groundwater was carried out to elucidate the processes controlling the oxidation and dissolution of sulphide minerals at two massive sulphide deposits in the Iberian Pyrite Belt (IPB), i.e. the mined La Zarza deposit and the unmined Masa Valverde deposit. It was found that major-element compositions varied according to the hydrological regime, La Zarza being in a relatively high area with groundwater recharge (and disturbance due to the human factor) and Masa Valverde being in a relatively low area with groundwater discharge. The variations mainly concern pH, Eh, SO₄ and Na concentrations. Metal concentrations were determined (a) by ICP-MS after filtration, and (b) in some cases by voltammetric measurement of Cu, Pb, Zn, Cd and Mn using the Voltammetric In situ Profiling (VIP) System, which allows detection of only the mobile fractions of trace elements (i.e., free metal ions and small labile complexes a few nanometers in size). If one compares the results obtained by each of the two methods, it would appear that the groundwater shows significant enhancement of metal solubility through complexing with organic matter and/or adsorption onto colloids and/or small particles. In areas of sulphide oxidation, however, this solubility enhancement decreases according to Cu>Zn>Cd>Pb. Under very low redox conditions, the attained metal concentrations can be several orders of magnitude (up to 10⁸–10⁹ for Cu and 10²–10³ for Pb) larger than those expected from equilibrium with respect to sulphide minerals as calculated with the EQ3NR geochemical code; Zn concentrations, however, are close to equilibrium with respect to sphalerite. The implication of these results is discussed with respect both to mineral exploration and to environmental issues.