郯庐断裂带鲁苏皖段构造应力场及分段特征研究

利用Snoke方法求解和收集得到的77次中小地震的震源机制解资料, 采用Gephart应力张量反演方法, 获得了郯庐断裂带鲁苏皖段构造应力场, 最大主压应力方位角为80°, 最小主压应力方位角为172°, 最大、 中等和最小主压应力倾角分别为15°、 65°和19°, 反映了研究区处于近EW向水平作用和近NS向的水平拉张作用环境下。 根据地震活动、 地质构造及震源机制解差异, 我们将郯庐断裂带鲁苏皖段分5个区段开展研究, 结果显示: 5个分区应力场存在局部差异, 最大主压应力方位角处于63°～88°之间, 从北往南总体方向成顺时针偏转的趋势。 跨郯庐断裂带两侧的应力场研究结果显示, 从西到东最大主压应力方向有一个逆时针偏转的趋势, 西侧最大主压应力方向更接近EW向, 东侧更接近NE向, 郯庐断裂带内处于两侧的过渡地段。     

提高GPS基线解算质量的方法研究

GPS基线解成果是GPS网平差的基础数据,其质量直接影响到控制网数据处理的最终成果.基线解合格后网平差才能顺利进行.GPS静态测量费时耗力,基线解精度较差时,往往需要重测.为了避免重测,本文重点对影响GPS基线结算的主要误差源进行了分析,并给出了提高基线结算质量的方法措施.     

锚杆抗滑桩加固边坡工程动力稳定性分析

锚杆抗滑桩加固边坡具有良好的抗震性能,目前这方面的研究资料还不多。结合大理西站边坡工程,应用拟静力法、时程分析法以及新近提出的有限元强度折减动力分析法对锚杆抗滑桩加固边坡进行动力稳定性分析。本文描述不同方法的计算特点和计算过程,比较不同的计算方法的异同点,分析锚杆抗滑桩的抗震性能与边坡的动力稳定性,以确保工程安全。研究成果可供类似工程设计参考。     

六种不同煤阶煤的品质因子特征

通过6种不同煤阶煤的弹性测试,分析了煤岩变质程度（以镜质组最大反射率表示）与煤岩品质因子之间的关系;在此基础上,进一步分析了煤岩速度与品质因子之间的关系及纵波与横波品质因子的各向异性特征.研究发现：煤岩镜质组最大反射率与纵波、横波品质因子均存在良好的线性相关性;垂直层理方向的波速与品质因子存在良好的线性关系,好于走向与倾向方向;垂直层理方向的纵波与横波品质因子线性相关,相关系数可达93.5%;煤岩的三方向品质因子存在各向异性,且强于速度的各向异性.通过横波品质因子与纵波品质因子间相互换算的理论公式计算结果与实验室实测结果的对比,证明了该理论公式的可靠性,误差小于10%,为多分量转换波的吸收衰减补偿提供了理论依据.     

浙江长兴深井地电台建设

随着人类的活动,地电阻率和地电场观测受到更多干扰。介绍浙江省长兴深井地电台建设过程,并讨论建设中存在的问题,初步分析地电观测资料,证明井下地电阻率和地电场观测在一定程度上可以屏蔽干扰,由此可见建设深井地电台的重要性。     

Failure time variation derived from R–S relation: the role of the static stress perturbation

In general, earthquake cycle related to earthquake faulting could include four major processes which could be described by (1) fault locking, (2) self-acceleration or nucleation (possible foreshocks), (3) coseismic slip, and (4) post-stress relaxation and afterslip. A sudden static stress change/perturbation in the surrounding crust can advance/delay the fault instability or failure time and modify earthquake rates. Based on a simple one-dimensional spring-slider block model with the combination of rate-and-state-dependent friction relation, in this study, we have approximately derived the simple analytical solutions of clock advance/delay of fault failures caused by a sudden static Coulomb stress change applied in the different temporal evolution periods during an earthquake faulting. The results have been used in the physics-based explanation of delayed characteristic earthquake in Parkfield region, California, in which the next characteristic earthquake of M 6.0 after 1966 occurred in 2004 instead of around 1988 according to its characteristic return period of 22 years. At the same time, the analytical solutions also indicate that the time advance/delay in Coulomb stress change derived by the dislocation model has a certain limitation and fundamental flaw. Furthermore, we discussed the essential difference between rate- and state-variable constitutive (R–S) model and Coulomb stress model used commonly in current earthquake triggering study, and demonstrated that, in fact, the Coulomb stress model could be involved in the R–S model. The results, we have obtained in this study, could be used in the development of time-dependent fault interaction model and the probability calculation related to the time-dependent and renewal earthquake prediction model.     

Land cover mapping using time series HJ-1/CCD data

It is very difficult to have remote sensing data with both high spatial resolution and high temporal frequency; thus, two categories of land-use mapping methodology have been developed separately for coarser resolution and finer resolution data. The first category uses time series of data to retrieve the variation of land surface for classification, which are usually used for coarser resolution data with high temporal frequency. The second category uses fine spatial resolution data to classify different land surface. With the launch of Chinese satellite constellation HJ-1in 2008, four 30 m spatial resolution CCDs with about 360 km coverage for each one onboard two satellites made a revisit period of two days, which brought a new type of data with both high spatial resolution and high temporal frequency. Therefore, by taking the spatiotemporal advantage of HJ-1/CCD data we propose a new method for finer resolution land cover mapping using the time series HJ-1/CCD data, which can greatly improve the land cover mapping accuracy. In our two study areas, the very high resolution remote sensing data within Google Earth are used to validate the land cover mapping results, which shows a very high mapping accuracy of 95.76% and 83.78% and a high Kappa coefficient of 0.9423 and 0.8165 in the Dahuofang area of Liaoning Province and the Heiquan area of Gansu Province respectively.     

The four dimensional variational data assimilation with multiple regularization parameters as a weak constraint (Tikh-4D-Var) and its preliminary application on typhoon initialization

Traditional variational data assimilation (VDA) with only one regularization parameter constraint cannot produce optimal error tuning for all observations. In this paper, a new data assimilation method of “four dimensional variational data assimilation (4D-Var) with multiple regularization parameters as a weak constraint (Tikh-4D-Var)” is proposed by imposing different regularization parameters for different observations. Meanwhile, a new multiple regularization parameters selection method, which is suitable for actual high-dimensional data assimilation system, is proposed based on the posterior information of 4D-Var system. Compared with the traditional single regularization parameter selection method, computation of the proposed multiple regularization parameters selection method is smaller. Based on WRF3.3.1 4D-Var data assimilation system, initialization and simulation of typhoon Chaba (2010) with the new Tikh-4D-Var method are compared with its counterpart 4D-Var to demonstrate the effectiveness of the new method. Results show that the new Tikh-4D-Var method can accelerate the convergence with less iterations. Moreover, compared with 4D-Var method, the typhoon track, intensity (including center surface pressure and maximum wind speed) and structure prediction are obviously improved with Tikh-4D-Var method for 72-h prediction. In addition, the accuracy of the observation error variances can be reflected by the multiple regularization parameters.     

祁连山青海云杉(Picea crassifolia)林土壤有机碳与化学性质的相互关系

通过对祁连山大野口流域的青海云杉林大样地进行土壤剖面取样, 分析了样地土壤有机碳与pH值、养分和阳离子交换量等基本化学性质的变化规律及其相互关系. 结果表明: 随土层深度不断增加, 土壤有机碳含量逐渐减小, 在20～30 cm以下趋于稳定(P > 0.05); 土壤pH值不断增大, 仅在0～10 cm与10～20 cm差异显著(P<0.05); 土壤全氮、速效氮、全磷和阳离子交换量不断减小, 全氮含量在30～40 cm以下趋于稳定(P > 0.05), 速效氮含量变化剧烈(P<0.05), 全磷含量差异性不显著(P > 0.05), 阳离子交换量与有机碳含量变化规律相同; 土壤速效磷、全钾和速效钾含量没有明显的变化规律, 速效磷和全钾含量差异性不显著(P > 0.05), 速效钾含量仅在0～10 cm与10～20 cm差异显著(P<0.05). 土壤有机碳与全氮、速效氮、全磷、速效磷、速效钾和阳离子交换量之间呈极显著和显著正相关, 与土壤pH值和全钾含量之间呈极显著和显著负相关. 土壤有机碳与其他基本化学性质的回归方程具有较高精度(R²=0.793), 影响土壤有机碳含量的主要化学因子依次为土壤阳离子交换量、速效钾和全磷含量.     

安徽巢湖地区中二叠统栖霞组灰岩中燧石成因

安徽省巢湖地区中二叠统栖霞组以发育一套滨海沼泽－浅海碳酸盐台地环境为主的细碎屑岩至碳酸盐岩沉积建造为特征,灰岩中常见结核状及条带状燧石。燧石多为椭球状和串珠状,部分燧石与灰岩间发育宽约0.5 cm的过渡带。镜下观察灰岩为微晶生物碎屑灰岩;过渡带也多由微晶方解石组成,多数钙质生物壳体被石英充填或半充填,扫描电镜下可见方解石微溶、石英充填溶孔的现象;燧石主要为隐晶及微晶石英,生物碎屑类型与灰岩中基本一致,且多被石英交代。岩石学特征表明死亡的生物在腐烂降解过程中形成的有机酸抑制了碳酸钙的沉淀,并使部分生物碎屑及灰泥发生溶蚀,胶质二氧化硅沉淀,形成燧石结核。燧石中w(Al)/w(Al+Fe+Mn)平均值为0.63,远大于热水沉积硅质岩的最大值0.35;Fe/Ti平均值为9.5,小于热水成因的最小值20;Al-Fe-Mn三角图投点位于非热液成因区域;燧石中Al₂O₃含量平均值为0.20%,远高于MgO、Na₂O、K₂O的含量。分析认为,该区燧石结核的二氧化硅可能来源于陆源物质。