Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.     

Groundwater flow system in Bengal Delta,Bangladesh revealed by environmental isotopes

A total number of 328 groundwater samples are analysed to evaluate the groundwater flow systems in Bengal Delta aquifers, Bangladesh using environmental isotope (²H, ¹⁸O, ¹³C, ³H, and ¹⁴C) techniques. A well-defined Local Meteoric Water Line (LMWL) δ²H = 7.7 δ¹⁸O + 10.7 ‰ is constructed applying linear correlation analyses to the monthly weighted rainfall isotopic compositions (δ¹⁸O and δ²H). The δ¹⁸O and δ²H concentrations of all groundwater samples in the study area are plotted more or less over the LMWL, which provides compelling evidence that all groundwaters are derived from rainfall and floodwater with a minor localized evaporation effects for the shallow groundwaters. Tritium concentration is observed in 40 samples out of 41 with values varying between 0.3 and 5.0 TU, which represents an evidence of young water recharge to the shallow and intermediate aquifers. A decreasing trend of ¹⁴C activity is associated with the heavier δ¹³C values, which indicates the presence of geochemical reactions affecting the ¹⁴C concentration along the groundwater flow system. Both vertical and lateral decrease of ¹⁴C activity toward down gradient show the presence of regional groundwater flow commencing from the unconfined aquifers, which discharges along the coastal regions. Finally, shallow, intermediate, and deep groundwater flow dynamics has revealed in the Bengal Delta aquifers, Bangladesh.     

Hydrothermal activity on the southern Mid-Atlantic Ridge: Tectonically- and volcanically-controlled venting at 4–5°S

We report results from an investigation of the geologic processes controlling hydrothermal activity along the previously-unstudied southern Mid-Atlantic Ridge (3–7°S). Our study employed the NOC (UK) deep-tow sidescan sonar instrument, TOBI, in concert with the WHOI (USA) autonomous underwater vehicle, ABE, to collect information concerning hydrothermal plume distributions in the water column co-registered with geologic investigations of the underlying seafloor. Two areas of high-temperature hydrothermal venting were identified. The first was situated in a non-transform discontinuity (NTD) between two adjacent second-order ridge-segments near 4°02′S, distant from any neovolcanic activity. This geologic setting is very similar to that of the ultramafic-hosted and tectonically-controlled Rainbow vent-site on the northern Mid-Atlantic Ridge. The second site was located at 4°48′S at the axial-summit centre of a second-order ridge-segment. There, high-temperature venting is hosted in an  18 km² area of young lava flows which in some cases are observed to have flowed over and engulfed pre-existing chemosynthetic vent-fauna. In both appearance and extent, these lava flows are directly reminiscent of those emplaced in Winter 2005−06 at the East Pacific Rise, 9°50′N and reference to global seismic catalogues reveals that a swarm of large (M 4.6−5.6) seismic events was centred on the 5°S segment over a  24 h period in late June 2002, perhaps indicating the precise timing of this volcanic eruptive episode. Temperature measurements at one of the vents found directly adjacent to the fresh lava flows at 5°S MAR (Turtle Pits) have subsequently revealed vent-fluids that are actively phase separating under conditions very close to the Critical Point for seawater, at  3000 m depth and 407 °C: the hottest vent-fluids yet reported from anywhere along the global ridge crest.     

Elevated sedimentation in lake records linked to agricultural activities in the Ishikari River floodplain,northern Japan

The purpose of this study was to examine the historical change in sedimentation rates in lakes that have been impacted by river regulation and agricultural activities in the Ishikari River floodplain. We dated sediment cores using caesium‐137 (¹³⁷Cs) dating and tephrochronology, and we estimated sediment sources from ¹³⁷Cs concentrations in the topsoil of representative land covers. We found that, between 1739 and 1963, the distance between the lake and the main river channel and whether or not the lake was connected to the river affected the sedimentation rates. After 1963, agricultural drainage systems were established in the Ishikari River floodplain. The average sedimentation rate before and after the construction of drainage ditches varied between 1–66 and 87–301 mg cm^–2 a^–1, respectively. The increase in the sedimentation rate after 1963 was caused by the construction of a number of drainage networks, as well as extensive cultivation activity and/or fragmentation of the swamp buffers surrounding the lakes. The ¹³⁷Cs activities at the surfaces of the lake as well as the catchment‐derived ¹³⁷Cs contributions and ¹³⁷Cs inventory in the lake profiles were used to examine the sediment influx from the various drainage areas after the establishment of the drainage system. Our results indicate that the majority of the lake sediments were derived from cultivated areas, and therefore the catchment‐derived ¹³⁷Cs contribution in the lakes was strongly correlated with the sedimentation rate. The ¹³⁷Cs inventory across all of the lake profiles was also significantly greater than the atmospheric fallout. We identified a negative correlation between the ¹³⁷Cs lake profile inventory and the sedimentation rate. This is because the sediment originating from the drainage areas contained low ¹³⁷Cs concentrations, which diluted the overall concentration of ¹³⁷Cs in the lake sediment. Copyright © 2009 John Wiley & Sons, Ltd.     

Diffusive dehydration and bubble resorption during open-system degassing of rhyolitic melts

Degassing through open paths such as bubble and/or fracture networks is considered to be the principal mode of degassing in silicic magmas. However, its detailed mechanisms remain unclear. To investigate the behavior of bubbles in a hypothetical open-system condition, we performed a series of vesiculation experiments on natural rhyolitic obsidian using a newly designed semipermeable cell, which artificially maintains a pressure difference between its inside and outside. The thick-wall cell maintains a constant volume within the sample chamber, while allowing water vapor to escape the cell during the experimental runs. The cells containing obsidian cores with ca. 0.66 wt.% initial water content were externally heated to 1000 °C for a period of 1–288 h. The run charges generally showed a zonal structure composed of two contrasting regions: a central region within which the bubbles were concentrated (bubble-rich core, BC) and a bubble-free melt region surrounding the BC (bubble-free margin, BFM). With increased heating duration, the thickness of the BFM increased via dissolution of the outermost bubbles in the BC. The water content was nearly uniform throughout the BC, whereas an outward-decreasing gradient was observed in the BFM. We found that diffusive dehydration occurred from the sample surface, and the bubbles were resorbed into the melt. Thus, the BFM–BC boundary moved inwards. These processes were modelled numerically, and the calculation results were in good agreement with the experimental data. If a “lifetime” of open paths is approximated as the relaxation time of a melt in a shallow volcanic environment, then the paths have to be pinched off quickly (1.2 h at maximum pressure difference between the open path and the melt) and thus the thickness of the bubble-free layer reaches at most ~ 0.1 mm. For the formation of bubble-free obsidian layers with a width of a few millimeters, which are often observed in natural obsidian flows, open paths should be maintained for at least a few hundred hours.     

Potential of in situ-produced cosmogenic nuclides for quantifying strength reduction of bedrock in soil-mantled hillslopes

This study presents a semi-empirical model for quantifying the reduction in the mechanical strength of bedrock beneath actively eroding soil-mantled hillslopes. The strength reduction of bedrock controls the rate of physical disintegration of saprolite, which supplies fresh minerals that are then exposed to intense chemical weathering in soil sections. To determine the values of parameters employed in the model requires knowledge of the denudation rate of the hillslope, the thickness of the soil and saprolite layers, the strength of fresh bedrock, and the threshold strength for physical erosion at the uppermost face of the saprolite. These parameters can be obtained from cosmogenic nuclide analyses for quartz samples from the soil–saprolite boundary and basic field- and laboratory-based investigations. Further testing of the model within a diverse range of climatic, tectonic, and lithologic environments is likely to provide clues to the mechanisms responsible for local and regional variations in the rates of soil production and chemical weathering upon hillslopes.     

Large aperture seismic imaging at a convergent margin: Techniques and results from the Costa Rica seismogenic zone

In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.     

Fluid Inclusion Study and Opaque Mineral Assemblage at the Deep and Shallow Part of the Batu Hijau Porphyry Copper-gold Deposit, Sumbawa, Indonesia

The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals.     

Compositional relations of coexisting orthopyroxene,pigeonite and augite in a tholeiitic andesite from Hakone Volcano

The compositions of five different coexisting pyroxenes hypersthene, pigeonite and augite in groundmass and bronzite and augite of phenocryst in a tholeiitic andesite from Hakone Volcano, Japan have been determined by the electron probe microanalyser. It is shown that there is a compositional gap of about 25 mole per cent CaSiO₃ between groundmass pigeonite and augite, compared with 35 per cent CaSiO₃ between phenocrystic augite and bronzite. Subcalcic augite or pigeonitic augite was not found. The groundmass augite, which occurs only as thin rims of pigeonite and hypersthene, is less calcic and more iron-rich than the phenocryst augite. It is also shown that the groundmass pigeonite is 3–4 mole per cent more CaSiO₃-rich than the coexisting groundmass hypersthene. The Fe/(Mg + Fe) ratios of these coexisting hypersthene and pigeonite are about 0.31 and 0.33, respectively. It is suggested from these results that a continuous solid solution does not exist between augite and pigeonite of the Fe/(Mg + Fe) ratio at least near 0.3 under the conditions of crystallization of groundmass of the tholeiitic andesite. It is suggested from the Mg-Fe partition and the textural relation that the groundmass augite crystallized from a liquid more iron-rich than that from which groundmass hypersthene and pigeonite crystallized.     

中国内陆高原正极性雷电的观测实验研究

叙述了１９９７年夏季中日两国科学家在甘肃平凉地区合作进行的有关正极性雷电的综合观测实验情况,包括地布局,所采用的技术手 取得的主要结果。实验中采用人工引发雷电技术并取得了两次成功,其中一次是利用“空中解发”方式,即火箭拖带的细钢丝下端不直接接地,而是通过一段绝缘尼龙线与接地的另一段细钢丝相连。用这种方式可以更真实地再现自然雷电的初始过程。实验中观测到了空中导线两端先导的双向传输现象;电流、电场变化