Long-range transport of particulate polycyclic aromatic hydrocarbons at Cape Hedo remote island site in the East China Sea between 2005 and 2008

Particle-associated polycyclic aromatic hydrocarbons (PAHs) in outflow from East Asia were observed at Cape Hedo, Okinawa, Japan between 2005 and 2008. The filter samples of the total suspended particles were analyzed by means of gas chromatography-mass spectrometry. The total concentration of fourteen 3–7-ring PAHs was 0.01–24 ng m^?3 (average 1.6 ng m^?3). The average PAH concentration increased in the winter-spring season and decreased in the summer-fall season. The average benzo(a)pyrene to benzo(e)pyrene ratio was 0.49 in the winter-spring season and was lower than the literature values for East Asian cities in the same season. This result shows that aging of organic aerosol particles proceeds during long-range transport from East Asia. In the Asian Pacific region, these pollutants are transported from East Asia in the winter-spring season, whereas clean air mass is transported from the Pacific Ocean in the summer-fall season.     

MOA-cam3: a wide-field mosaic CCD camera for a gravitational microlensing survey in New Zealand

We have developed a wide-field mosaic CCD camera, MOA-cam3, mounted at the prime focus of the Microlensing Observations in Astrophysics (MOA) 1.8-m telescope. The camera consists of ten E2V CCD4482 chips, each having 2k×4k pixels, and covers a 2.2 deg² field of view with a single exposure. The optical system is well optimized to realize uniform image quality over this wide field. The chips are constantly cooled by a cryocooler at ??80° C, at which temperature dark current noise is negligible for a typical 1–3 min exposure. The CCD output charge is converted to a 16-bit digital signal by the GenIII system (Astronomical Research Cameras Inc.) and readout is within 25 s. Readout noise of 2–3 ADU (rms) is also negligible. We prepared a wide-band red filter for an effective microlensing survey and also Bessell V, I filters for standard astronomical studies. Microlensing studies have entered into a new era, which requires more statistics, and more rapid alerts to catch exotic light curves. Our new system is a powerful tool to realize both these requirements.     

Petrological variation of large-volume felsic magmas from Hakkoda-Towada caldera cluster: Implications for the origin of high-K felsic magmas in the Northeast Japan Arc

Abstract The Hakkoda‐Towada caldera cluster (HTCC) is a typical Late Cenozoic caldera cluster located in the northern part of the Northeast Japan Arc. The HTCC consists of five caldera volcanoes, active between 3.5 Ma and present time. The felsic magmas can be classified into high‐K (HK‐) type and medium‐ to low‐K (MLK‐) type based on their whole‐rock chemistry. The HK‐type magmas are characterized by higher K₂O and Rb contents and higher ⁸⁷Sr/⁸⁶Sr ratios than MLK‐type magmas. Both magmas cannot be derived from fractional crystallization of any basaltic magma in the HTCC. Assimilation‐fractional crystallization model calculations show that crustal assimilation is necessary for producing the felsic magmas, and HK‐type magmas are produced by higher degree of crustal assimilation with fractional crystallization than MLK‐type magmas. Although MLK‐type magmas were erupted throughout HTCC activity, HK‐type magmas were erupted only during the initial stage. The temporal variations of magma types suggest the large contribution of crustal components in the initial stage. A major volcanic hiatus of 3 my before the HTCC activity suggests a relatively cold crust in the initial stage. The cold crust probably promoted crustal assimilation and fractional crystallization, and caused the initial generation of HK‐type magmas. Subsequently, the repeated supply of mantle‐derived magmas raised temperature in the crust and formed relatively stable magma pathways. Such a later system produced MLK‐type magmas with lesser crustal components. The MLK‐type magmas are common and HK‐type magmas are exceptional during the Pliocene–Quaternary volcanism in the Northeast Japan Arc. This fact suggests that exceptional conditions are necessary for the production of HK‐type magmas. A relatively cold crust caused by a long volcanic hiatus (several million years) is considered as one of the probable conditions. Intensive crustal assimilation and fractional crystallization promoted by the cold crust may be necessary for the generation of highly evolved HK‐type felsic magmas.     

Hydrothermal Alteration and Mineralization of Middle Jurassic Dexing Porphyry Cu-Mo Deposit, Southeast China

The Dexing deposit is located in a NE‐trending magmatic belt along the southeastern margin of the Yangtze Craton. It is the largest porphyry copper deposit in China, consisting of three porphyry copper orebodies of Zhushahong, Tongchang and Fujiawu from northwest to southeast. It contains 1168 Mt of ores with 0.5% Cu and 0.01% Mo. The Dexing deposit is hosted by Middle Jurassic granodiorite porphyries and pelitic schist of Proterozoic age. The Tongchang granodiorite porphyry has a medium K cal‐alkaline series, with medium K₂O content (1.94–2.07 wt%), and low K₂O/(Na₂O + K₂O) (0.33–0.84) ratios. They have high large‐ion lithophile elements, high light rare‐earth elements, and low high‐field‐strength elements. The hydrothermal alteration at Tongchang is divided into four alteration mineral assemblages and related vein systems. They are early K‐feldspar alteration and A vein; transitional (chlorite + illite) alteration and B vein; late phyllic (quartz + muscovite) alteration and D vein; and latest carbonate, sulfate and oxide alteration and hematite veins. Primary fluid inclusions in quartz from phyllic alteration assemblage include liquid‐rich (type 1), vapor‐rich (type 2) and halite‐bearing ones (type 3). These provide trapping pressures of 20–400 ´ 10⁵ Pa of fluids responsible for the formation of D veins. Igneous biotite from least altered granochiorite porphyry and hydrothermal muscovite in mineralized granodiorite porphyry possess δ¹⁸O and δD values of 4.6‰ and ?87‰ for biotite and 7.1–8.9‰, ?71 to ?73‰ for muscovite. Stable isotopic composition of the hydrothermal water suggests a magmatic origin. The carbon and oxygen isotope for hydrothermal calcite are ?4.8 to ?6.2‰ and 6.8–18.8‰, respectively. The δ³⁴S of pyrite in quartz vein ranges from ?0.1 to 3‰, whereas δ³⁴S for chalcopyrite in calcite veins ranges from 4 to 5‰. These are similar to the results of previous studies, and suggest a magmatic origin for sulfur. Results from alteration assemblages and vein system observation, as well as geochemical, fluid inclusion, stable isotope studies indicate that the involvement of hydrothermal fluids exsolved from a crystallizing melt are responsible for the formation of Tongchang porphyry Cu‐Mo orebodies in Dexing porphyry deposit.     

Spectral observations of impact dark spots

We carried out a spectral observation of traces of the comet impacts within the wavelength region between 440 and 830 nm. Three dark spots of fragments K, E, and G impact sites were investigated. The spectrum of these dark spots shows no special emission or absorption lines in this observation. The global spectral feature resembles that of Jovian zone cloud rather than that of the belt. While the continuum reflectivity of the dark spots of K and E sites is less than 0.42 at 600 nm, that of the G site is 0.33. These values should be interpreted as an upper limits because of the influence of atmospheric seeing. The equivalent width of the absorption lines at the K sites is also derived. Both the continuum reflectivity and the equivalent width of the dark spots are smaller than those of any Jovian zonal cloud. This indicates that the dark spots are low-albedo cloud formed at the upper atmosphere.     

Determination of Stress State from Focal Mechanisms of Microseismic Events Induced During Hydraulic Injection at the Hijiori Hot Dry Rock Site

—?The stress state at the Hijiori hot dry rock site was estimated based on the inversion from focal mechanisms of microseismic events induced during hydraulic injection experiments. The best fit stress model obtained by inverting 58 focal mechanisms of seismic events simultaneously indicates that the maximum principal stress σ₁ is vertical, while the minimum principal stress σ₃ is horizontal and trends north-south. The average misfit between the stress model and all the data is 6.8°. The inversion results show that the average misfit is small enough to satisfy the assumption of homogeneity in the focal mechanism data and that the 95% confidence regions of σ₁ and σ₃ are well constrained, i.e., they do not overlap, suggesting that the inversion results are acceptable. The stress estimates obtained by the focal mechanism inversion essentially agree with other stress estimates previously obtained. It is therefore concluded that the focal mechanism inversion method provides a useful tool for estimating the stress state. The hypocentral distributions of microseismic events associated with the hydraulic fracturing experiments are distributed around the plane that spreads to almost east–west from the injection wells and declines to the north at a high angle. The vertical orientation and east–west strike of the seismic events are essentially coplanar with the caldera ring-fault structure in the southern portion of the Hijiori Caldera. This indicates that tensile fractures of intact rock were not being created, but pre-existing fractures were being re-opened and developed in the direction of the maximum horizontal principal stress, although microseismic events were caused by shear failures.     

Plutonium diffusivity in compacted bentonite

Measurements on plutonium diffusivity in water-saturated compacted bentonite were carried out. Representative specimens of sodium bentonite were taken from the Tsukinuno and Kuroishi mines situated in northeast Japan. Tsukinuno bentonite was divided into three types: raw type, purified Na-type, and H-type which was prepared by treating Na-type bentonite with hydrochloric acid. Kuroishi bentonite contained chlorite as impurity. H-type bentonite was used as reference for the convenience of profile measurement in bentonite, since plutonium diffusivity in H-type bentonite was considered to be larger than that in Na-type bentonite because of low pH and low swelling pressure of H-type bentonite.

Sampled bentonite was compacted into pellets of 20 mm in diameter and 20 mm in height. Bulk densities of these specimens were 1200–1800 kg/m³ for purified Na-type and H-type bentonite and 1600 kg/m³ for raw type bentonite.

Plutonium profiles obtained in H-type bentonite can be explained by diffusion equation with constant concentration source. Diffusivity ranges from 10^-13 to 10¹² m²/s for H-type and Kuroishi impure sodium bentonite. Diffusivity in both raw type and purified Tsukinuno bentonite was was estimated to less than 10^-14 M²/s. Diffusivity in H-type bentonite showed a tendency to decrease with increasing density. Influence of in bentonite was also studied. Quartz content up to 50% or hematite content up to 1% did not influence diffusivity significantly in H-type bentonite.

The chemical species of plutonium in pore water of Na-type and H-type were estimated Pu(OH)₃^-; and PuO₂^- , respectively.     

Practical determination of mechanical design parameters of intact rock considering scale effect

As a rule, the change in mechanical properties of rock by specimen size is regarded as scale effect. A rock mass basically consists of two components: intact rock and discontinuities, each of which has different scale effects. In order to numerically analyze the behavior of discontinuous rock masses, sufficient mechanical properties must be determined not only for discontinuities but also for intact rock taking into consideration the different scale effects. This paper reviews the scale effect on strength and deformation characteristics of intact rock, and also discusses the possibility of using standard specimens to estimate strength and deformation characteristics of actual-scale rock. Finally, we propose an adequate method for the practical determination of mechanical design parameters based on the above discussions.