Interpretation of Mineral Zoning in Submarine Hydrothermal Ore Deposits in Terms of Coupled Fluid Flow‐Precipitation Kinetics Model

Major minerals (sulfates, sulfides, quartz) are distributed in different parts of submarine hydrothermal ore deposits. For instance, the abundance of barite increases stratigraphically upwards in the massive orebodies of the Kuroko deposits (black and yellow ores), while quartz is abundant in the lower parts (siliceous ore). The different distribution of barite and quartz in the Kuroko deposits can not be accounted for by thermochemical equilibrium calculations based on the precipitation due to mixing of ascending hydrothermal solutions with ambient cold seawater. In the present study, a coupled fluid flow‐precipitation kinetics model was used to calculate the amounts of quartz, barite, and anhydrite precipitated from a hydrothermal solution mixed with seawater, assuming reasonable values for temperature, precipitation rate, fluid flow velocity, mineral surface area/fluid mass ratio (A/M), and initial concentrations of hydrothermal solution and seawater before mixing occurred. The results indicate that barite precipitates more efficiently than quartz from discharging fluids with relatively higher flow velocity, lower temperatures and under the condition of lower A/M ratios on the seafloor (black ore), whereas quartz precipitates more effectively from solutions with lower flow velocity, higher temperatures and higher A/M ratios beneath the seafloor (siliceous ore) and in the orebody (barite ore, ferruginous chert ore). Anhydrite precipitates in shallow sub‐seafloor environments with lower precipitation rates and higher A/M ratios than barite and higher precipitation rates and lower A/M ratios than quartz. These results explain the observed occurrences of barite, anhydrite, and quartz in the Kuroko deposits. Namely, barite is abundant in black ore and barite ore which formed above the seafloor, anhydrite formed in high‐permeability tuff breccias, and quartz formed in low permeability dacite intrusive bodies in the sub‐seafloor environment.     

Temporal changes in electrical resistivity at Sakurajima volcano from continuous magnetotelluric observations

Continuous magnetotelluric (MT) measurements were conducted from May 2008 to July 2009 at Sakurajima, one of the most active volcanoes in Japan. Two observation sites were established at locations 3.3 km east and 3 km west–northwest of the summit crater. At both observation sites, the high-quality component of the impedance tensor (Zyx) showed variations in apparent resistivity of approximately ± 20% and phase change of ± 2°, which continued for 20–180 days in the frequency range between 320 and 4 Hz. The start of the period of changes in apparent resistivity approximately coincided with the start of uplift in the direction of the summit crater, as observed by a tiltmeter, which is one of the most reliable pieces of equipment with which to detect magma intrusion beneath a volcano. A 2D inversion of MT impedance suggests that the resistivity change occurred at a depth around sea level. One of the possible implications of the present finding is that the degassed volatiles migrated not only vertically through the conduit but also laterally through a fracture network, mixing with shallow groundwater beneath sea level and thereby causing the observed resistivity change.     

Heavy metals contamination in water and sediments of an urban river in a developing country

Water and sediment samples were collected from 20 location of the Buriganga river of Bangladesh during Summer and Winter 2009 to determine the spatial distribution, seasonal and temporal variation of different heavy metal contents. Sequential extraction procedure was employed in sediment samples for the geochemical partitioning of the metals. Total trace metal content in water and sediment samples were analyzed and compared with different standard and reference values. Concentration of total chromium, lead, cadmium, zinc, copper, nickel, cobalt and arsenic in water samples were greatly exceeded the toxicity reference values in both season. Concentration of chromium, lead, copper and nickel in sediment samples were mostly higher than that of severe effect level values, at which the sediment is considered heavily polluted. On average 72 % chromium, 92 % lead, 88 % zinc, 73 % copper, 63 % nickel and 68 % of total cobalt were associated with the first three labile sequential extraction phases, which portion is readily bioavailable and might be associated with frequent negative biological effects. Enrichment factor values demonstrated that the lead, cadmium, zinc, chromium and copper in most of the sediment samples were enriched sever to very severely. The pollution load index value for the total area was as high as 21.1 in Summer and 24.6 in Winter season; while values above one indicates progressive deterioration of the sites and estuarine quality. The extent of heavy metals pollution in the Buriganga river system implies that the condition is much frightening and may severely affect the aquatic ecology of the river.     

Production and bacterial decomposition of dissolved organic matter in a fringing coral reef

The concentrations of dissolved organic carbon and nitrogen (DOC and DON, respectively) were measured in Shiraho fringing reef (Japan), using a high-temperature catalytic-oxidation method. When the seawater on the reef flat (shallow lagoon) was isolated from the surrounding ocean due to the low tide, the concentrations of DOC and DON on the reef flat were 66–75 and 4.8–5.7 μmol l⁻¹, respectively. The DOC and DON concentrations were higher than those of the adjacent outer ocean (57–58 and 3.8 μmol l⁻¹, respectively), suggesting that the coral reef functioned as a net source of dissolved organic matter for the surrounding ocean. In order to investigate long-term bacterial decomposition of the reef-derived DOC (RF-DOC), the seawater samples collected on the reef flat and at the adjacent ocean were incubated in the dark for 1 year. Regression analysis using an exponential curve that considered two degradability pools (labile and refractory) fitted the mineralization of the RF-DOC very well (r ² > 0.89). According to the regression analysis, the DOC produced on the reef flat was composed of the labile fraction of 63–94% (average 77%) and the refractory fraction of 6–37% (average 23%). It was concluded that some of the DOC that was produced in the coral reef ecosystem was exported to the surrounding ocean if the reef flat had a water residence time less than several months. The exported organic matter may support microbial communities in the ocean as an energy source.     

钻孔千斤顶压裂测量技术的发展和原地测量

为了测量距地表1 000 m以下位置的地壳应力状态,我们研究并开发了钻孔千斤顶压裂技术.技术的原理是:当钻孔千斤顶对钻孔壁加载时,与钻孔轴向平行的方向将会产生两个相对的新裂隙;卸载之后,如果千斤顶对钻孔壁的同一个地方进行施压,这对裂隙将会再次张开.与钻孔轴向垂直的平面上的两个主应力的大小和方向分别是由重张压力和裂隙的方...     

http://www.sciencedirect.com/science/article/pii/S167498711200062X

This paper focuses on the formation mechanism of fractures induced by excavation of a gallery in soft sedimentary rocks in the Horonobe area of Japan.Detailed fracture mapping of the gallery indicates that the fractures consist of both pre-existing shear fractures and excavation damaged zone(EDZ) fractures. EDZ fractures correspond to weak planes associated with bedding planes or transgranular cracks.The EDZ fractures terminate against pre-existing shear fractures.Therefore,even for excavations in soft sedimentary rocks,formation of the EDZ fractures are controlled by pre-existing fractures and earlier weak planes.     

Magma discharge variations during the 2011 eruptions of Shinmoe-dake volcano, Japan, revealed by geodetic and satellite observations

We present precise geodetic and satellite observation-based estimations of the erupted volume and discharge rate of magma during the 2011 eruptions of Kirishima-Shinmoe-dake volcano, Japan. During these events, the type and intensity of eruption drastically changed within a week, with three major sub-Plinian eruptions on January 26 and 27, and a continuous lava extrusion from January 29 to 31. In response to each eruptive event, borehole-type tiltmeters detected deflation of a magma chamber caused by migration of magma to the surface. These measurements enabled us to estimate the geodetic volume change in the magma chamber caused by each eruptive event. Erupted volumes and discharge rates were constrained during lava extrusion using synthetic aperture radar satellite imaging of lava accumulation inside the summit crater. Combining the geodetic volume change and the volume of lava extrusion enabled the determination of the erupted volume and discharge rate during each sub-Plinian event. These precise estimates provide important information about magma storage conditions in magma chambers and eruption column dynamics, and indicate that the Shinmoe-dake eruptions occurred in a critical state between explosive and effusive eruption.     

Olivine-rich exposures in the South Pole-Aitken Basin

The distribution and the geological context of the olivine-rich exposures in the South Pole-Aitken (SPA) Basin on the Moon were investigated based on the spectral data obtained from the Spectral Profiler (SP) and Multiband Imager (MI) onboard the Japanese lunar explorer Kaguya/SELENE. The olivine-rich exposures are found only in the peak rings or central peaks of the Schrödinger basin and Zeeman crater, which are located in the outer region of the SPA Basin and not in the center region. On a localized scale, the olivine-rich materials are exposed on landslide features on the crater walls or sloped wall of the central peaks or the peak rings. Another observational finding is the co-existence of olivine-rich and plagioclase-rich materials on a kilometer scale spanning most of the olivine-rich sites in the Schrödinger basin. Pyroxene-rich materials are found in fresh craters outside the peak rings or the central peaks with olivine-rich materials. Based on these results, the following scenario are proposed: (1) the impact to form the SPA Basin melted a large amount of the lunar upper mantle and crust, and distributed the melted materials to the outer region; (2) local differentiation of melted materials hid the olivine-rich materials in the center region of the SPA Basin; (3) later impacts that formed the Schrödinger and Zeeman craters excavated and exposed the olivine-rich materials to the surface again; and (4) space weathering and regolith gardening obscured the olivine-rich spectra at the exposure sites, but recent, small scale impacts or landslides on the sloped wall exposed fresh olivine-rich materials, allowing the identification of the olivine-rich exposures by spectral remote-sensing. This suggests that several, different scale events play an important role in forming the surface distributions of originally deep-seated materials on the Moon, as well as on other planetary bodies.     

To Move or not to Move: Community Members’ Reaction to Surface Mining Activities in the Upper West Region of Ghana

Abstract

Despite the impact of mining-induced environmental change on community livability, we know little about how disparities in knowledge of health risks associated with mining influence residents’ response, especially in an already environmentally stressed context. Guided by theoretical insights from solastalgia, we examined residents’ decision to relocate due to increasing gold mining activities in the fragile Northern Savannah Ecological Zone of Ghana. Fitting complementary log-log regression models to cross-sectional data from the Upper West Region (UWR) of Ghana, we found that residents with limited knowledge of potential health impacts of mining and those who believe mining activities were not meeting environmental standards were more likely to consider relocating. Given the centrality of land in community health and wellbeing in the UWR, Ghana’s mining guidelines should promote local participation in the regulation of mining activities and guarantee the rights of indigenes to livable native lands.