ACTIVE system for monitoring volcanic activity: A case study of the Izu-Oshima Volcano,Central Japan

A system is proposed for the monitoring of changes in the underground structure of an active volcano over time by applying a transient electromagnetic method. The monitoring system is named ACTIVE, which stands for Array of Controlled Transient-electromagnetics for Imaging Volcano Edifice. The system consists of a transmitter dipole used to generate a controlled transient electromagnetic (EM) field and an array of receivers used to measure the vertical component of the transient magnetic field at various distances, with automatic operation of both units. In order to verify the performance of the proposed system, numerical and field experiments were carried out by application of the system to the Izu-Oshima volcano, where a remarkable change in the apparent DC resistivity over time had been detected in association with the eruption in 1986.     

Space-time distribution patterns of destructive earthquakes in the inner belt of central Japan: Activity intervals and locations of earthquakes

Based on a block structure model of the inner belt of central Japan, an examination was conducted of the space-time distribution patterns of destructiv magnitudes M 6.4 or greater (M =Japan Meteorological Agency Scale). The distribution patterns revealed a periodicity in earthquake activit seismic gaps. Major NW—SE trending left-lateral active faults divide the inner belt of central Japan into four blocks, 20–80 km wide. The occurrenc A.D. with M ≥ 6.4, which have caused significant damage, were documented in the inner belt of central Japan. The epicenters of these earthquakes close to the block boundaries.

Using the relationship between the magnitude of earthquakes which occurred in the Japanese Islands and the active length of faults that generated them, movement is calculated for each historical earthquake. Space—time distributions of earthquakes were obtained from the calculated lengths, the latitud of generation. When an active period begins, a portion or segment of the block boundary creates an earthquake, which in turn appears on the ground surf active period ends when the block boundary generates earthquakes over the entire length of the block boundary without overlapping.

Five seismic gaps with fault lengths of 20 km or longer can be found in the inner belt of central Japan. It is predicted that the gaps will generate ea magnitudes of 7.0. These data are of significance for estimating a regional earthquake risk over central Japan in the design of large earthquake resist

The time sequences of earthquakes on the block boundaries reveal a similar tendency, with alternating active periods with seismic activity and quiet pe activity. The inner belt of central Japan is now in the last stage of an active period. The next active period is predicted to occur around 2500 A.D.     

Japan-equator XBT sections in late November 1989 and in early December 1991

A comparison between Japan-equator XBT sections along 150°E in late November 1989 and along 140°E in early December 1991 is made. The warmest surface water above 29°C diminished to the south of 2–4°N and the surface mixed layer noticeably decreased in thickness in the equatorial region in December 1991; besides, the North Equatorial Countercurrent was intensified. This is considered to be a manifestation of changes in the surface layer of the western equatorial Pacific in the mature phase of El Niño.     

ESR dating of palaeolithic calcite: A comparison between powder and monocrystal spectra with thermal annealing

Evolution of ESR spectra with thermal annealing at different temperatures is studied for a monocrystal calcite taken in the Orgnac III site. Up to 20 ESR lines are recognized from the angular dependence of these lines. These lines are compared with the ESR lines observed for powder and rotating monocrystal calcites.The h1 line (g = 2.0057) and h3 line (g = 2.0007) are isotropic or nearly isotropic and are due to the electrons trapped in the amorphous region formed by fission tracks or alpha-ray recoil nuclei. The h2 line (g = 2.0021) is a composite of several different lines.     

Performance of dry-separation processes in the recovery of cenospheres from fly ash and their implementation in a recovery unit

Cenospheres recovery is one of the coal fly ash beneficiations, providing economic as well as environmental benefits. Current techniques, such as lagoon or other wet-separation processes, consume large amounts of water and add to water pollution due to leaching of toxic materials from fly ash. The other possible disadvantage is the need for a wide operational area, which is unsuitable for densely populated countries. As wet-separation processes have some disadvantages, an improved and/or sustainable alternative recovery technique is required. An air classifier is one of the alternative techniques. In this study, two types of air classifiers, namely a closed-type pneumatic separator and a micron separator, have been investigated. In terms of separation efficiency, it was found that the micron separator has the potential to be applied in cenospheres recovery from coal fly ash, giving a Newton's efficiency of 0.44, as compared to a value of about 0.26 for the closed-type pneumatic separator. The cenospheres recoveries of both pieces of equipment at their optimum Newton's efficiencies were similar at over 60 wt.%. The separation performance was further assessed from the particle distributions of the overflow and underflow products obtained from both pieces of equipment, as well as from SEM images. It was found that the lower Newton's efficiency of the closed-type pneumatic separator was due to the re-concentration of fine particles in the underflow product at air-flow rates higher than 2.2 m/s (the underflow product yield was about 55 wt.%).In order to further confirm the applicability of this technique, the micron separator, which had provided higher separation efficiency and cenospheres recovery, was deployed in a cenospheres recovery unit prior to the use of a wet-separation process (float and sink tank). About 80% of the cenospheres was recovered, with an 87.8% reduction in the total mass of fly ash to be separated in the float and sink tank. Consequently, much less water was needed for the process of cenospheres recovery. Moreover, it was also confirmed that the micron separator could yield higher quality fly ashes, that is, fly ash types I and II, from lower feed quality of fly ash type IV, which is the lowest category in commercial classification of fly ash according to JIS A6201.     

Observations of the North Equatorial Current,Mindanao Current,and Kuroshio current system during the 2006/07 El Niño and 2007/08 La Niña

Two onboard observation campaigns were carried out in the western boundary region of the Philippine Sea in December 2006 and January 2008 during the 2006/07 El Niño and the 2007/08 La Niña to observe the North Equatorial Current (NEC), Mindanao Current (MC), and Kuroshio current system. The NEC and MC measured in late 2006 under El Niño conditions were stronger than those measured during early 2008 under La Niña conditions. The opposite was true for the current speed of the Kuroshio, which was stronger in early 2008 than in late 2006. The increase in dynamic height around 8°N, 130°E from December 2006 to January 2008 resulted in a weakening of the NEC and MC. Local wind variability in this region did not appear to contribute to changes in the current system.     

In situ observation of a garnet/perovskite transition in CaGeO<Subscript>3</Subscript>

We used an in situ measurement method to investigate the phase transition of CaGeO₃ polymorphs under high pressures and temperatures. A multi-anvil high-pressure apparatus combined with intense synchrotron X-ray radiation was used. The transition boundary between a garnet and a perovskite phase at T = 900–1,650 K and P = 3–8 GPa was determined as occurring at P (GPa) = 9.0−0.0023 × T (K). The transition pressure determined in our study is in general agreement with that observed in previous high-pressure experiments. The slope, dP/dT, of the transition determined in our study is consistent with that calculated from calorimetry data.     

Podiform chromitite formation in a low-Cr/high-Al system: An example from the Southwest Indian Ridge (SWIR)

Recent reassessment of abyssal peridotites obtained during the dredging of the oblique supersegment and the easternmost subsection of the Southwest Indian Ridge by the R/V Knorr Cruise 162 and the R/V Yokosuka YK98-07 revealed the occurrence of dunites containing podiform chromitites and dunites with variable chromite concentration closely associated with lherzolite and harzburgite. The size of the chromitite pods varies from a few mm to 2 cm in width. Chromites in the podifom chromitites have very low Cr# (=0.22–0.23) and low TiO₂ (<0.17 wt%). They are almost free of silicate inclusions except for a few euhedral sulfide grains which occur far from cracks and lamellae and are considered primary in origin. The lherzolite which possibly represents the wallrock hosting the dunites with podiform chromitites also show low spinel Cr#(=0.16) and low Cr# in the clinopyroxenes (=0.09–0.10) and orthopyroxenes (=0.07–0.09). The small size of the SWIR podiform chromitites is strongly controlled by the low Cr/Al available in the wallrock and the invading melt. The presence of sulfide inclusions and the absence of PGEs further attest to the low Cr/Al (i.e. low refractoriness) in the system involved in the genesis of the SWIR podiform chromitites. Lastly, the discovery of podiform chromitites in the SWIR implies that the formation of podiform chromitite at mid-oceanic ridges, regardless of its spreading rate, is highly possible.     

Sea navigation, challenges and potentials in South East Asia: an assessment of suitable sites for a shipping canal in the South Thai Isthmus

This paper discusses the situation of sea navigation in south East Asia focusing on the Strait of Malacca. The strait links the Indian and Pacific oceans, which is considered one of the busiest in several narrow channels around the world. The paper highlights the significance of the strait to global maritime trade, volume of traffic, and rising environmental and social consequences in the strait. A feasibility study of constructing a new shipping canal in the South Thai Kra Isthmus as an alternative option of Malacca route had been studied since 19th century. The paper explores suitable sites for a potential shipping canal in the Kra Isthmus using physiographic spatial data i.e., elevation, sea charts, geology, soils and river systems. Each spatial data was considered as a separate decision variable for site evaluation. Separate evaluation criterions were prepared for each variable based on shipping canal requirements. Overlaying the maps in GIS environment, the variables were carefully evaluated, and five geographic sites for the canal were derived. The length of the shipping canal over sea and land was computed for each site. Site B located in south of Ranong and Chumphon provinces, was the shortest one, whereas site C in Surat Thani, Pangnna and Krabi provinces was the longest. However, each site consisted of benefits and constraints.