Seepage erosion and its implication to the formation of amphitheatre valley heads: A case study at Obara,Japan

Seepage erosion was investigated in an amphitheatre with a semicircular valley head, steep slopes, and a flat bottom developed in granodiorite hills at Obara, Aichi prefecture, Japan. A high sediment yield occurred where the measuring sites were located at the base of the landslide debris in the base of the convex slopes, whereas sediment outflows were small where the measuring sites were located at the base of the strong convex slopes. This implies that the seepage erosion was an effective agent for removal of debris deposited at the base of the slope. Small landslides can be found at the lower slopes within the area of the observed amphitheatre. The slope stability analysis and subsurface water observation of the lower slope suggest that the small landslides in this amphitheatre are due to over-steepened slopes, and relatively insensitive to subsurface water status. Colluvium in the flat valley bottom thinly covers the bedrock surface. Therefore the topography of the amphitheatre was found to be formed by parallel retreat of slopes by the repetition of basal seepage erosion and subsequent small landslides.     

Observation of the Kyucho in the Bungo Channel by HF radar

Observations of sea surface currents by HF radar were carried out in the Bungo Channel in summer 1992. The current ellipses of M₂ constituent obtained by the observational results agree quite well with those obtained by the ADCP observations, showing that the accuracy of the HF radar measurements is of the same level as ADCP. The results revealed the current structures and their change with the Kyucho in detail. The Kyucho is influenced by the complicated coastal geometry and does not propagate straightly into the Bungo Channel. It propagates further inward after charging the coastal bays with warm water. The current directions change largely, since the currents turn around the stagnant region in the bay filled with the warm water. The northward intrusion begins to be weakened in the southern part of the channel, while it still persists in the northern part. The northward current speeds of the observed Kyucho are about 50 cm/s and sometimes attain 60 to 70 cm/s.     

High-pressure phase transitions of CaRhO<Subscript>3</Subscript> perovskite

High-pressure phase transitions of CaRhO₃ perovskite were examined at pressures of 6–27 GPa and temperatures of 1,000–1,930°C, using a multi-anvil apparatus. The results indicate that CaRhO₃ perovskite successively transforms to two new high-pressure phases with increasing pressure. Rietveld analysis of powder X-ray diffraction data indicated that, in the two new phases, the phase stable at higher pressure possesses the CaIrO₃-type post-perovskite structure (space group Cmcm) with lattice parameters: a = 3.1013(1) Å, b = 9.8555(2) Å, c = 7.2643(1) Å, V _m  = 33.43(1) cm³/mol. The Rietveld analysis also indicated that CaRhO₃ perovskite has the GdFeO₃-type structure (space group Pnma) with lattice parameters: a = 5.5631(1) Å, b = 7.6308(1) Å, c = 5.3267(1) Å, V _m  = 34.04(1) cm³/mol. The third phase stable in the intermediate P, T conditions between perovskite and post-perovskite has monoclinic symmetry with the cell parameters: a = 12.490(3) Å, b = 3.1233(3) Å, c = 8.8630(7) Å, β = 103.96(1)°, V _m  = 33.66(1) cm³/mol (Z = 6). Molar volume changes from perovskite to the intermediate phase and from the intermediate phase to post-perovskite are –1.1 and –0.7%, respectively. The equilibrium phase relations determined indicate that the boundary slopes are large positive values: 29 ± 2 MPa/K for the perovskite—intermediate phase transition and 62 ± 6 MPa/K for the intermediate phase—post-perovskite transition. The structural features of the CaRhO₃ intermediate phase suggest that the phase has edge-sharing RhO₆ octahedra and may have an intermediate structure between perovskite and post-perovskite.     

The use of RFID in soil‐erosion research

In this paper, we examine the use of radio frequency identification (RFID) tags for studying soil erosion. Surrogate soil particles were created by coating RFID tags with silicone clay and bronze powder to give them an overall density similar to that of quartz particles. The particles were between 2.5 mm and 4.0 mm in diameter and had specific weights of 2.5 to 3.0. These tagged particles were deployed on two plots: first, in a proof‐of‐concept laboratory study and secondly in a field study, the latter involving repeated surveys after rainfall events. Seven surveys under natural rainfall over four months yielded recovery rates averaged 56%. RFIDs are shown to provide useful insights into the movement of individual soil particles during erosion processes. As RFID technology advances, further miniaturization is likely to occur enabling the movement of a greater range of soil particles to be studied, and we may anticipate improvements to the signal detection so that recovery does not rely wholly on visual identification. Copyright © 2014 John Wiley & Sons, Ltd.     

Using sediment travel distance to estimate medium‐term erosion rates: a 16‐year record

Fine grained (80 µm) magnetite was introduced onto a semi‐arid grassland hillslope in 1992, as part of a set of rainfall‐simulation experiments. Using measurements of magnetic susceptibility, the median distance travelled by these magnetite grains during subsequent natural runoff events in the 16‐year period up to 2008 was estimated. Coupling this estimate to direct measurements of sediment flux obtained during the rainfall‐simulation experiments has enabled estimation of the erosion rate over this period. The estimated average erosion rate of between 2·61 × 10^?2 and 4·36 × 10^?2 kg m^?1 year^?1, is equivalent to a rate of ground lowering between 0·020 and 0·033 mm year^?1. This estimate is consistent with (in the sense of being less than) an estimate of total sediment detachment over the same period. The rate of erosion measured using this travel‐distance approach is an order of magnitude less that obtained from a study based on ¹³⁷Cs in a nearby catchment, and compatible with the longevity of continents. Copyright © 2010 John Wiley & Sons, Ltd.     

Estrogen equivalent concentration of individual isomer-specific 4-nonylphenol in Ariake sea water, Japan

Concentrations of 4-nonylphenol (NP) were determined by isomer-specific quantification of individual NP isomers based on relative response factor (RRF) quantification with GC–MS in combination with steam distillation extraction. Concentrations of NP in the Ariake Sea decreased with distance from the river mouth (St.A; 49 ng NP/l) to offshore areas (St.C; 11 ng NP/l). Even the least concentration in water from St.C in Ariake Sea was sufficient to have adverse effects on barnacles. The isomers, NP1–NP14 were separated by GC–PFC and identified structurally with NMR. The isomers varied in estrogenic activity with NP7 exhibiting the greatest estrogenic activity with a potency that was approximately 1.9 × 10⁻³ that of 17β-estradiol (E2) in recombinant yeast screen system. The coefficient of variation (CV) of NP isomer’s concentrations among three samples at St.A, B and C were 4–75%. This suggests that NP isomers might be independently degraded in aquatic environmental samples. The predicted estrogenic activity of measured concentrations of NP in Ariake Sea was 2.7–3.0-fold greater than the measured estrogen agonist activity.     

塔里木盆地南缘自然与人文历史变迁的耦合关系

通过对里大盆地南缘自然与人文变迁的耦合关系研究,表明其自然生态环境演化、人文历史变迁是自然因素与人文力量综合作用的结果。若气候湿润、水量丰沛,则有利于绿洲经济、文化生产的迅速发展提高。反之,则环境恶化、沙漠化过程加快、绿洲废弃。早期自然环境因素的影响所占比重大,而后期人文力量起主导作用。自然条件决定了环境的特征及其演化的内在基础,人类活动是本地最活跃、最能动的因素。这在自然生态环境特别脆弱的地区表     

Discrete‐like crack simulation by smeared crack‐based FEM for reinforced concrete

A numerical process that simulates crack propagation in reinforced concrete through post‐crack stress redistribution is presented. This process is developed within the context of the smeared crack approach. Continuity and orientation of the reinforcing bar components are automatically recognized in the pre‐processing stage. The process explicitly outputs crack widths by computing the bond slips along reinforcement, without imposing any additional nodes between the reinforcement and concrete. The process is incorporated with a finite element algorithm, and the validation is investigated through sample 3D static analyses of nine concrete specimens subjected to monotonic shear and flexure loads. These specimens contain relatively well‐distributed steel bars and fiber reinforced polymer (FRP) sheets of reinforcement ratio from 0.11 to 0.57%. The analyses predict the crack patterns and crack widths well, although some disagreements are found between the test and the analysis results. The proposed process outputs discrete, continuous in crack directions, and element boundary‐free crack patterns. Copyright © 2007 John Wiley & Sons, Ltd.     

Light utilization efficiency of phytoplankton in the Western Subarctic Gyre of the North Pacific during summer

We investigated the water-column light utilization efficiency (Ψ) of phytoplankton photosynthesis in the Western Subarctic Gyre (WSG) of the North Pacific during summer 2008. The Ψ values (0.64–1.86 g C [g Chl a]^?1 [mol photon]^?1 m²) obtained were observed to increase significantly with decreasing daily photosynthetic available radiation (PAR) and were generally higher than those of previous studies, not only from the subarctic Pacific but also from the world’s oceans. To examine the effect of iron availability on Ψ in the WSG, Ψ values were estimated from the data of two in situ iron fertilization experiments: the Subarctic Pacific Iron Experiment for Ecosystem Dynamics Study I (SEEDS-I) and II (SEEDS-II). We found that iron availability did not affect Ψ values. Overall, this study revealed that Ψ values changed remarkably in the WSG during the summer, and that higher values were found at the stations where moderate PAR levels (ca. 10–30 mol photons m^?2 day^?1) were observed and where autotrophic flagellates predominated in the phytoplankton assemblages.