Hydrothermal plume mapping as a prospecting tool for seafloor sulfide deposits: a case study at the Zouyu-1 and Zouyu-2 hydrothermal fields in the southern Mid-Atlantic Ridge

Seafloor hydrothermal polymetallic sulfide deposits are a new type of resource, with great potential economic value and good prospect development. This paper discusses turbidity, oxidation–reduction potential, and temperature anomalies of hydrothermal plumes from the Zouyu-1 and Zouyu-2 hydrothermal fields on the southern Mid-Atlantic Ridge. We use the known location of these vent fields and plume data collected in multiple years (2009, 2011, 2013) to demonstrate how real-time plume exploration can be used to locate active vent fields, and thus associated sulfide deposits. Turbidity anomalies can be detected 10 s of km from an active source, but the location precision is no better than a few kilometers because fine-grained particles are quasi-conservative over periods of many days. Temperature and oxidation–reduction potential anomalies provide location precision of a few hundred meters. Temperature anomalies are generally weak and difficult to reliably detect, except by chance encounters of a buoyant plume. Oxidation–reduction potential is highly sensitive (nmol concentrations of reduced hydrothermal chemicals) to discharges of all temperatures and responds immediately to a plume encounter. Real-time surveys using continuous tows of turbidity and oxidation–reduction potential sensors offer the most efficient and precise surface ship exploration presently possible.     

Regularity and estimation of methane emission from marshland in the Sanjiang Plain

ＲＥＧＵＬＡＲＩＴＹＡＮＤＥＳＴＩＭＡＴＩＯＮＯＦＭＥＴＨＡＮＥＥＭＩＳＳＩＯＮＦＲＯＭＭＡＲＳＨＬＡＮＤＩＮＴＨＥＳＡＮＪＩＡＮＧＰＬＡＩＮ①ＣｕｉＢａｏｓｈａｎ（崔保山）ＭａＸｕｅｈｕｉ（马学慧）ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＧｅｏｇｒ...     

Distribution characteristics of delta reservoirs reshaped by bottom currents: A case study from the second member of the Yinggehai Formation in the DF1-1 gas field,Yinggehai Basin,South China Sea

The Dongfang1-1 gas field (DF1-1) in the Yinggehai Basin is currently the largest offshore self-developed gas field in China and is rich in oil and gas resources. The second member of the Pliocene Yinggehai Formation (YGHF) is the main gas-producing formation and is composed of various sedimentary types; however, a clear understanding of the sedimentary types and development patterns is lacking. Here, typical lithofacies, logging facies and seismic facies types and characteristics of the YGHF are identified based on high-precision 3D seismic data combined with drilling, logging, analysis and testing data. Based on 3D seismic interpretation and attribute analysis, the origin of high-amplitude reflections is clarified, and the main types and evolution characteristics of sedimentary facies are identified. Taking gas formation upper II (IIU) as an example, the plane distribution of the delta front and bottom current channel is determined; finally, a comprehensive sedimentary model of the YGHF second member is established. This second member is a shallowly buried “bright spot” gas reservoir with weak compaction. The velocity of sandstone is slightly lower than that of mudstone, and the reflection has medium amplitude when there is no gas. The velocity of sandstone decreases considerably after gas accumulation, resulting in an increase in the wave impedance difference and high-amplitude (bright spot) reflection between sandstone and mudstone; the range of high amplitudes is consistent with that of gas-bearing traps. The distribution of gas reservoirs is obviously controlled by dome-shaped diapir structural traps, and diapir faults are channels through which natural gas from underlying Miocene source rocks can enter traps. The study area is a delta front deposit developed on a shallow sea shelf. The lithologies of the reservoir are mainly composed of very fine sand and coarse silt, and a variety of sedimentary structural types reflect a shallow sea delta environment; upward thickening funnel type, strong toothed bell type and toothed funnel type logging facies are developed. In total, 4 stages of delta front sand bodies (corresponding to progradational reflection seismic facies) derived from the Red River and Blue River in Vietnam have developed in the second member of the YGHF; these sand bodies are dated to 1.5 Ma and correspond to four gas formations. During sedimentation, many bottom current channels (corresponding to channel fill seismic facies) formed, which interacted with the superposed progradational reflections. When the provenance supply was strong in the northwest, the area was dominated by a large set of delta front deposits. In the period of relative sea level rise, surface bottom currents parallel to the coastline were dominant, and undercutting erosion was obvious, forming multistage superimposed erosion troughs. Three large bottom current channels that developed in the late sedimentary period of gas formation IIU are the most typical.     

二维小波变换与中值滤波联合去噪方法研究

由于随机噪声是一种频带较宽的干扰波,因此依靠单一的去噪处理方式往往难以获得清晰反映目标体的地震信息。小波变换能够较好的去除高斯噪声,保留有效波中、高频成分,提高记录的信噪比,但去除脉冲噪声的效果却并不理想;中值滤波具有良好的边缘保持特性,虽低频去噪声效果有限,但去除脉冲噪声效果明显。因此可利用二维小波变换与中值滤波优势互补的方法,进行叠前去噪处理,达到去除宽频随机噪声的目的。首先运用二维小波变换的理论,采用自适应门限阀值方法进行去噪,同时结合中值滤波方法联合去噪。模型与实际数据的应用效果表明,联合去噪方法可有效压制噪声能量、保留高频有效信号、提高地震记录信噪比与分辨率。     

地磁干扰噪声的实验观测

为探查1988年3月前后在北京地磁台附近出现的较明显的地磁干扰噪声,我们在苏家坨—卧龙岗一带布设了8个测点,开展了专门的地磁干扰噪声实验观测。结果表明,该地磁干扰噪声主要是来自香山一带的电磁干扰,其次是北京市的地铁干扰。此地磁干扰噪声出现于每天06~h—23~h(北京时),其主要频谱成分在短周期(T=2—4 m)部分。另外本文的观测研究方法对于监测地磁台站(测点)的环境状况,改正受污染的地磁资料等方面具有实际应用价值。     

Study of red tide prediction model for the Changjiang Estuary

ＩＮＴＲＯＤＵＣＴＩＯＮＡｑｕｉｃｕｌｔｕｒｅａｒｅａｒｅｄｔｉｄｅｓｉｇｎａｌｓｏｃｅａｎｐｏｌｌｕｔｉｏｎａｎｄｄｉｓａｓｔｅｒ.Ａｌｔｈｏｕｇｈｅｎｖｉｒｏｎｍｅｎｔｓｃｉｅｎｔｉｓｔｓｈａｖｅｃｏｎｄｕｃｔｅｄｍａｎｙｉｎ ｄｅｐｔｈｒｅｓｅａｒｃｈｅｓｏｎｔｈｅｃａｕｓｅａｎｄｆｏｒｍａｔｉｏｎｍｅｃｈａｎｉｓｍｏｆｒｅｄｔｉｄｅ ,ｍａｎｙｏｆｉｔｓａｓｐｅｃｔｓａｒｅｓｔｉｌｌｕｎｋｎｏｗｎｂｅｃａｕｓｅｒｅｄｔｉｄｅｉｓａｃｏｍｐｌｅｘｐｈｅｎｏｍｅｎｏｎａｎｄｔｈｅｅｃｏｌｏｇｉｃ…     

Tests and applications of an approach to absorbing reflected waves towards incident boundary

If the upstream boundary conditions are prescribed based on the incident wave only, the time-dependent numerical models cannot effectively simulate the wave field when the physical or spurious reflected waves become significant. This paper describes carefully an approach to specifying the incident wave boundary conditions combined with a set sponge layer to absorb the reflected waves towards the incident boundary. Incorporated into a time-dependent numerical model, whose governing equations are the Boussinesq-type ones, the effectiveness of the approach is studied in detail. The general boundary conditions, describing the down-wave boundary conditions are also generalized to the case of random waves. The numerical model is in detail examined. The test cases include both the normal one-dimensional incident regular or random waves and the two-dimensional oblique incident regular waves. The calculated results show that the present approach is effective on damping the reflected waves towards the incident wave boundary.     

Fusion of high-resolution DEMs derived from COSMO-SkyMed and TerraSAR-X InSAR datasets

Voids caused by shadow, layover, and decorrelation usually occur in digital elevation models (DEMs) of mountainous areas that are derived from interferometric synthetic aperture radar (InSAR) datasets. The presence of voids degrades the quality and usability of the DEMs. Thus, void removal is considered as an integral part of the DEM production using InSAR data. The fusion of multiple DEMs has been widely recognized as a promising way for the void removal. Because the vertical accuracy of multiple DEMs can be different, the selection of optimum weights becomes a key problem in the fusion and is studied in this article. As a showcase, two high-resolution InSAR DEMs near Mt. Qilian in northwest China are created and then merged. The two pairs of InSAR data were acquired by TerraSAR-X from an ascending orbit and COSMO-SkyMed from a descending orbit. A maximum likelihood fusion scheme with the weights optimally determined by the height of ambiguity and the variance of phase noise is adopted to syncretize the two DEMs in our study. The fused DEM has a fine spatial resolution of 10 m and depicts the landform of the study area well. The percentage of void cells in the fused DEM is only 0.13 %, while 6.9 and 5.7 % of the cells in the COSMO-SkyMed DEM and the TerraSAR-X DEM are originally voids. Using the ICESat/GLAS elevation data and the Chinese national DEM of scale 1:50,000 as references, we evaluate vertical accuracy levels of the fused DEM as well as the original InSAR DEMs. The results show that substantial improvements could be achieved by DEM fusion after atmospheric phase screen removal. The quality of fused DEM can even meet the high-resolution terrain information (HRTI) standard.     

The Derivation and Validation of TBM Disc Cutter Wear Prediction Model

The problem of disc cutter wear is inevitable when shield or TBM excavating hard rock for a long distance, thus, the study of disc cutter wear model has an important project value on predicting its service life and replacement opportunity. It is put forward by analyzing disc cutter wear mechanism that the main wear form is abrasive wear, which is based on plastic removal mechanism. Then, disc cutter wear rate and linear wear rate prediction models are obtained by approximate calculation and mathematical deduction, which are based on Rabinowicz equation and CSM model. At last, the two models are verified through field test data from three projects, and the results show that the prediction model can accurately reflect the real wear situation of disc cutter.