A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

Objective prism survey of qsos in the field centered at 10h40m + 00°00′

QSO objective prism survey was done for the field centered at 10^h40^m + 00°00. For the 348 objects selected, we present in this paper their positions,B _J magnitudes, spectra, and finding charts. Based on the sample containing 163 QSO candidates with higher reliabilities (F 3), the surface density of QSO candidates withB _J 20 is estimated to be about 4.5 per square degree.Work based on UKST plates.     

岭南城市居住小区生态系统及其规划

本文探讨了城市居住小区生态系统，提出了城市生态居住小区的关键因素，最后对岭南城市生态居住小区规划进行了探索。     

南宁、百色盆地红土风化壳的地球化学特征及其环境意义*

本文以广西南宁盆地那桐风化壳,及百色盆地江泽风地壳的大量土体化学分析数据为依据,进行了第四纪红土的确认、形成、分布和土壤肥力状况。以及通过地球化学强度、硅铁系数、硅铝系数等指标进行了两风化壳的对比研究。同时,还探讨了风化壳的发育过程及其与环境的关系。     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。     

长江漫滩区深大异形基坑施工对紧邻特大型桥梁影响及变形控制研究

随着地下空间资源的开发利用,越来越多深基坑呈现出开挖深、规模大、形状不规则等特点,其支护结构设计复杂,施工难度大,具有明显的空间效应。本文以南京地铁某基坑工程为例,分析基坑施工对邻近桥梁的影响。其场区位于长江下游漫滩相二元结构地层分布地段,上部软土层厚度大,下部承压含水层地下水位高、水量丰富,地质条件复杂,该基坑为典型的深大异形基坑,距离某大桥的双曲拱引桥仅为7. 2 m,由于之前桥梁已遭受其他地下工程施工产生的较大变形,所以后续工程对其影响变形控制要求极高。为此,该车站基坑支护结构设计基于地下空间实际功能采用设置分隔墙分区开挖及MJS超深工法墙综合变形控制方案。本文通过有限元数值模拟计算,开展复杂环境下基坑开挖引起的围护结构及桥梁桩基的变形预测分析,计算结果显示,该深大狭长异形基坑开挖对邻近桥梁沉降变形影响显著,通过设置分隔墙分区开挖及MJS工法墙进行变形控制,能够较好地控制基坑的空间效应,减少“长边效应”、“异形效应”等对桥梁沉降变形的影响。通过现场基坑开挖过程实际监测结果,验证这一综合变形控制方案的可行性。该研究成果对于类似复杂地质条件下深大狭长异形基坑的支护及施工设计具有很好的借鉴意义。     

基于A- CGAN的深反射地震数据随机噪声压制方法研究

基于深度学习的地震数据噪声压制方法是当前地震数据去噪处理的重要方向。深度学习方法突破了传统滤波处理的局限,在对常规地震数据的噪声压制中表现出效率高、信噪分离效果好的特点。但针对深部弱有效反射数据,当前的深度学习方法特征提取能力有限,难以取得较好的去噪效果。笔者等结合深反射地震数据特点,针对当前深度学习噪声压制方法在特征提取及对数据集依赖上的局限,提出了基于注意力循环生成对抗网络(Attention Cycle- Consistent Generative Adversarial Networks,A- CGAN)的深反射地震数据随机噪声压制方法。借助循环一致生成对抗网络(Cycle- Consistent Generative Adversarial Networks,Cycle- GAN)的域映射思想,降低对数据集的要求。为了构建适用于深反射地震数据的去噪网络,从3个方面对Cycle- GAN进行改进：在Cycle- GAN的生成器（去噪器）中加入残差结构和注意力机制,用于加深网络深度和提高其特征提取能力;在Cycle- GAN的鉴别器中使用块判决,提高鉴别精度和准确度;在损失函数部分加入感知一致性损失函数,提升网络模型恢复纹理细节信息的能力。通过合成地震数据和实际深反射地震数据测试,验证了优化算法的有效性,体现了良好的应用价值。     

Seasonal change of ice algal and phytoplankton assemblages in the Nella Fjord near Zhongshan Station, East Antarctica

The ice algal and phytoplankton assemblages were studied from Nella Fjord near Zhongshan Station, East Antarctica from April 12 to December 30, 1992. Algal blooms occurred about 3 cm thick on the bottom of sea ice in late April and mid November to early December respectively, and a phytoplankton bloom appeared in the underlying surface water in mid December following the spring ice algal bloom. The biomass in ice bottom was 1 to 3 orders of magnitude higher than that of surface water. Amphiprora kjellmanii, Berkeleya sp., Navicula glaciei, Nitzschia barkelyi, N. cylindrus /N. curta, N. lecointei and Nitzschia sp. were common in the sea ice temporarily or throughout the study period. The biomass in a certain ice segment was decreased gradually and the dominant species were usually succeeded as the season went on. Nitzschia sublineata and Dactyliosolen antarctica were two seasonal dominant species only observed in underlying water column. The assemblages between bottom of ice and underlying surface water were different except when spring ice algae bloomed. The evidence shows that the ice algal blooms occurred mainly by in situ growth of ice algae, and the phytoplankton bloom was mostly caused by the release of ice algae.     

水热法从钾长石中提取钾、硅、铝的实验研究

通过水热化学反应将钾长石中的钾、硅和铝转变为可溶性组份,具有十分重要的应用价值.本文用单因素实验考察了不同水热反应实验条件对钾长石中钾、硅、铝溶出率的影响,并根据溶出率结果优化了反应条件.单因素实验结果表明:(1)在190℃条件下,随生石灰加入量的逐渐增加,产物中各元素的溶出率有一个先增加后减少的趋势.(2)在相同的生石灰、钾长石比例下,当反应16 h后,产物中各元素的溶出率随反应时间的延长趋于平缓.(3)随反应温度的逐渐增加,产物中各元素的溶出率逐渐增加.