利用四元数改进大旋转角坐标变换模型

大旋转角坐标变换模型的迭代解法依赖于初值的确定。用四元数构造旋转矩阵,建立了三维坐标变换的牛顿迭代公式,并提出了一种初值构造算法。利用实测数据和模拟数据对该算法进行了验证,并与其他算法进行比较。结果表明,该初值构造算法使得基于四元数的大旋转角坐标变换模型更加稳健。     

Study on the Global Carbon Assimilation System Based on Multisource Remote Sensing Data

The Paris agreement signed in April, 2016 aims to balance global anthropogenic carbon emissions and terrestrial carbon sinks by the middle of the 21^st century. To fulfill this goal, it is necessary to calculate carbon fluxes of different regions reliably. The global carbon assimilation system is an effective technique for achieving this goal. The Ministry of Science and Technology of China supports the project entitled as study on the global carbon assimilation system based on multisource remote sensing data through the national key research and development programs for global change and adaptation during the thirteen-five period. This project will develop synergic inversion techniques for retrieving key parameters of biological and atmospheric cycles and for assimilating multisource remote sensing and ground based data. Then, the high resolution global carbon assimilation system coupled with an ecological model will be constructed. This system is able to assimilate jointly multisource observation data and to optimize key model parameters, photosynthesis and respiration carbon fluxes of global terrestrial ecosystems, and anthropogenic carbon emission fluxes of key regions. This system will be used to study quantitatively the spatial and temporal patterns of carbon fluxes of global terrestrial ecosystems and anthropogenic carbon emission fluxes of key regions and to identify the mechanisms driving the global terrestrial carbon sinks and sources. The outputs of this study will be helpful for the fulfillment of the key research and development programs for global change and adaptation and provide valuable data and technical support for the decision-making in China.     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.     

Making data useful for modelers to understand complex Earth systems

The Arctic is changing rapidly with dramatic local and global effect. To understand that change requires understanding the Arctic as a system. Models of different processes and at various scales are necessary tools for analyzing and understanding the Earth system. Models are extremely diverse, yet they all require quality data. Through a series of case studies, augmented with ethnographic observation around the International Polar Year, this work examines how modelers assess, acquire, and prepare data for their models. By comparing specific case studies, common themes emerge that can be compared against broader observation. These themes, in turn, suggest data management techniques or requirements for data systems to improve access and use by modelers and generally improve understanding of the Arctic system. The study has an Arctic focus because of the rapid changes occurring in the Arctic, but the approach and results should apply generally to Earth system science. This case study based approach has proven to be a useful method for teasing out both general and specific data needs for different models. An overarching lesson is that greater short-term benefit to modelers and significant gains in efficiency can be achieved by improving the formats, convention, and consistency of the data rather than improved interfaces and analysis tools. A “data-first” philosophy can improve the data systems that support the overall interdisciplinary, integrative science necessary to understand the complex Earth system.     

Postglacial vegetation history of Mitkof Island, Alexander Archipelago, southeastern Alaska

An AMS radiocarbon-dated pollen record from a peat deposit on Mitkof Island, southeastern Alaska provides a vegetation history spanning ∼12,900 cal yr BP to the present. Late Wisconsin glaciers covered the entire island; deglaciation occurred > 15,400 cal yr BP. The earliest known vegetation to develop on the island (∼12,900 cal yr BP) was pine woodland (Pinus contorta) with alder (Alnus), sedges (Cyperaceae) and ferns (Polypodiaceae type). By ∼12,240 cal yr BP, Sitka spruce (Picea sitchensis) began to colonize the island while pine woodland declined. By ∼11,200 cal yr BP, mountain hemlock (Tsuga mertensiana) began to spread across the island. Sitka spruce-mountain hemlock forests dominated the lowland landscapes of the island until ∼10,180 cal yr BP, when western hemlock (Tsuga heterophylla) began to colonize, and soon became the dominant tree species. Rising percentages of pine, sedge, and sphagnum after ∼7100 cal yr BP may reflect an expansion of peat bog habitats as regional climate began to shift to cooler, wetter conditions. A decline in alders at that time suggests that coastal forests had spread into the island's uplands, replacing large areas of alder thickets. Cedars (Chamaecyparis nootkatensis, Thuja plicata) appeared on Mitkof Island during the late Holocene.     

Behavior of the cosmic ray density during the initial phase of the Forbush effect

Variations in the cosmic ray density during the initial phase of the Forbush effect during the first hours after the arrival of the interplanetary shock wave have been studied with the use of data on variations in the cosmic ray density with a rigidity of 10 GV obtained by the global survey method by the world network of neutron monitors in 1957?2012. It is found that behavior of this parameter after the arrival of the shock wave demonstrates high variability. A small (~1/5 of total number), though distinct, group of Forbush effects, in which the density of the cosmic ray increases (not decreases) after the arrival of the shock wave, is defined. As a whole, the initial variation in cosmic ray density is correlated with the Forbush effect magnitude and the strength of the associated geomagnetic disturbance.     

Ultramafic–Mafic Assemblage of Plutonic Rocks and Hornblende Schists of Shirshov Rise,Bering Sea,and Stalemate Ridge,Northwest Pacific: Geodynamic Interpretations of Geochemical Data

The paper presents data on plutonic and metamorphic rocks dredged during Cruise 249 of the German R/V Sonne to the Stalemate Ridge, Northwest Pacific Ocean and the Shirshov Rise, western Bering Sea. Dredges in the northwestern sector of the Stalemate Ridge and central portion of the Shirshov Rise show that the plutonic and metamorphic rocks obtained here are amazingly similar. Our petrologic and geochemical data led us to view the rocks as members of a mafic–ultramafic assemblage typical of cumulate portions of ophiolite complexes and backarc spreading centers. The plutonic complexes of the Shirshov Rise and Stalemate Ridge show similarities not only in the petrography and mineralogy of their protoliths but also in the character of their metamorphic transformations. Plutonic rocks from both areas display mineralogical evidence of metamorphism within a broad temperature range: from the high-temperature amphibolite facies to the greenschist facies. Relations between the index mineral assemblages indicate that the metamorphic history of plutonic complexes in the Stalemate Ridge and Shirshov Rise proceeded along a retrograde path. Hornblende schists accompanying the plutonic rocks of the Stalemate Ridge and Shirshov Rise are petrographically close to foliated amphibolites in subophiolitic metamorphic aureoles. Within the framework of geodynamic interpretations of our results, it is realistic to suggest that the examined plutonic complexes were exhumed from subduction zones of various age.     

海洋工程中桩基水平向承载力可靠指标的影响因素分析

桩基础水平向承载力的计算是海洋工程中桩基设计的重要组成部分。论文在搜集了大量平台建设资料的基础上,以现有的桩基水平向承载力的设计计算方法为依据,进行了水平向承载力的可靠度研究。对影响可靠指标的各个因素进行了灵敏度分析。     

不同氧化还原条件下铅锌矿尾砂中重金属元素活化迁移规律

以广西大厂镇鲁塘铅锌矿尾砂为研究对象,通过淋滤实验研究了不同氧化还原条件下尾砂中Cu、Cd、Zn、Pb和As等元素的活化和迁移规律。结果表明：经高浓度氧化、高浓度还原条件处理的尾矿表现为pH<7的酸性环境,经低浓度氧化环境条件处理的尾砂呈现pH>7的弱酸性至弱碱性环境;尾砂中Cu、Cd元素活化迁移受pH值的影响明显,即高浓度还原和高浓度氧化条件可以促进Cu和Cd元素的迁移,酸性条件对Cu和Cd元素的迁移起到促进作用;Zn与Cd元素存在竞争吸附关系,但二者仍有明显差别;Pb和As元素受到还原条件的影响,能有效促进Pb和As元素的释放迁移。在淋滤实验前期,铅锌矿的表面阻力较小,由于环境酸碱性的改变,初始尾砂对重金属元素的吸附位能发生变化,重金属元素初期迁移能力得到加强;淋滤后期,矿物颗粒表面由于发生氧化还原反应,促使颗粒表面的阻力增加,重金属元素的溶出量减少,迁移能力受到抑制。