A new method for platform design based on parametric technology

A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods.     

中国海滑蛤属Liocyma(双壳纲:帘蛤科)一新种

滑蛤属至今已发现的种都分布于北半球,这些种类都是冷水种。新种Liocyma chinensis是一个温水种,采自渤海莱州湾,这是滑蛤属在亚洲大陆最南的分布界线。新种的发现,增加了黄、渤海动物区系中的冷水性因素。     

连云港近岸海域沉积物中重金属污染来源及生态评价

采用等离子体发射光谱法、冷原子吸收法、原子荧光光谱法及灼烧法测定了连云港海州湾近岸表层沉积物中重金属和有机质的含量,利用主成分分析法(Principal Component Analysis,PCA)研究了沉积物中重金属的来源,发现前3个主成分的贡献率分别为54.21%、19.04%、16.37%,表明重金属主要有3个来源:工业和生活污水排放、农业灌溉水的排放、有机质降解。以PCA计算结果为基础应用海洋沉积物污染指数(Marine sediment pollution index,MSPI)和平均沉积物质量标准商数(Mean sediment quality guideline quotient,SQG-Q)评价了沉积物中重金属的污染状况及对生物的潜在影响。结果发现,海州湾近岸海区沉积物质量污染严重(MSPI值在60到80之间),排污口海区的沉积物污染最为严重(MSPI值大于80),连云港近岸海域沉积物对生物的负影响潜力为中度水平(0.1SQG-Q1)。     

彩色全息显示中液晶空间光调制器位相调制偏差的矫正方法

采用三基色激光照明并结合时分复用或空间复用技术,可实现基于液晶空间光调制器(LC-SLM)的彩色全息显示. 但由于在不同激光波长入射条件下LC-SLM的位相调制特性曲线不同,难以同时满足多波长入射条件下2π线性位相调制的要求,致使彩色全息再现结果受到共轭像和零级斑的干扰. 针对该问题,本文通过实验测试获得LC-SLM在不同波长入射时的位相调制特性曲线,并分析了RGB激光器各分量的位相调制特性曲线非线性偏差和调制幅度偏差对多阶位相型傅里叶变换相息图再现效果的影响. 根据"查表法"建立了各波长入射条件下满足2     

Sr2CoO4-δ薄膜中的自旋玻璃态的磁性质研究

用脉冲激光沉积方法(PLD)在铝酸镧衬底上制备了c取向的高氧空位含量的锶钴氧薄膜.X射线衍射分析表明薄膜单一取向且没有明显杂相.原位的高气压反射式高能电子衍射仪(RHEED)监测显示,薄膜为层状生长.通过对薄膜磁化强度随温度、磁场及时间的变化曲线进行测量,发现零场冷曲线上可能存在两个特征温度:T_f和T_a.T_f为对应玻璃态的冻结温度而T_a对应少量的不缺     

一种胶体光子晶体修饰的光纤

设计了一种胶体光子晶体修饰的光纤. 采用恒温快速蒸发法直接在经切割刀处理后的光纤端面生长胶体晶体,再与另一根切割后的光纤在毛细玻璃管中完成对接,制备成胶体光子晶体修饰的光纤. 用扫描电子显微镜和光谱分析仪对样品的形貌、结构以及光学特性进行分析. 实验结果表明,粒径为640 nm、体积分数约为0.5%的SiO₂胶体微球溶液在60 ℃的情况下沉积,大约12 h后可得到质量较高的胶体光子晶体. 在SEM下,观察到端面的胶体晶体为面心立方(fcc)结构. 透射光谱证明,该结构在(111)面上     

N掺杂SnO2材料光电性质的第一性原理研究

采用全电势线性缀加平面波(full potential linearized augmented plane wave method,简记为FP-LAPW)方法,基于密度泛函理论第一性原理计算分析N掺杂SnO₂材料,研究了在N替代O原子和N替代Sn原子情况下的电子态密度、电荷密度分布以及光学性质.研究表明N掺杂替代Sn较之N掺杂替代O原子的带隙要宽,都宽于SnO₂的本征带隙,且两种情况下N分别处于负氧化态和正氧化态,其介电函数谱也与带隙对应发生蓝移,从理论上指出     

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1--9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.     

Influence of core property on multi-electron process in slow collisions of isocharged sequence ions with neon

Influence of core property on multi-electron process in the collisions of q=6-9 and 11 isocharged sequence ions with Ne is investigated in the keV/u region. The cross-section ratios of double-, triple-, quadruple- and total multi-electron processes to the single electron capture process as well as the partial ratios of different reaction channels to the relevant multi-electron process are measured by using position-sensitive and time-of-flight techniques. The experimental data are compared with the theoretical predictions including the extended classical over-barrier model, the molecular Columbic barrier model and the semi-empirical scaling law. Results show a core effect on multi-electron process of isocharge ions colliding with Neon, which is consistent with the results of Helium we obtained previously.     

Comparisons of ZnO codoped by group IIIA elements (Al, Ga, In) and N: a first-principle study

The electronic structures and effective masses of the N mono-doped and Al-N, Ga-N, In-N codoped ZnO system have been calculated by a first-principle method, and comparisons among different doping cases are made. According to the results, the impurity states in the codoping cases are more delocalised compared to the N mono-doping case, which means a better conductive behaviour can be obtained by codoping. Besides, compared to the Al-N and Ga-N codoping cases, the hole effective mass of In-N codoped system is much smaller, indicating the p-type conductivity can be more enhanced by In-N codoping.