Astrometric Observations of the Galilean Moons of Jupiter at the Pulkovo Normal Astrograph in 2016−2017

We present the results of observations of the Galilean moons of Jupiter carried out at the Normal Astrograph of the Pulkovo Observatory in 2016?2017. We obtained 761 positions of the Galilean moons of Jupiter in the system of the Gaia DR1 catalog (ICRF, J2000.0) and 854 differential coordinates of the satellites relative to each other. The mean errors in the satellites’ normal places and the corresponding root-mean-square deviations are ε_α = 0.0020′′, ε_δ = 0.0027′′, σ_α = 0.0546′′, and σ_δ = 0.0757′′. The equatorial coordinates of the moons are compared to the motion theories of planets and satellites. On average, the (O–C) residuals in the both coordinates relative to the motion theories are less than 0.031′′. The best agreement with observations is achieved by a combination of the EPM2015 and V. Lainey-V.2.0|V1.1 motion theories, which yields the average (O–C) residuals of approximately 0.02″. Peculiarities in the behavior of the (O–C) residuals and error values in Ganymede have been noticed.     

高海况下无人水下航行器的横摇运动分析

为明确高海况下海况等级对无人水下航行器横摇运动的影响,得出满足某型无人水下航行器安全回收的海况条件,对高海况下无人水下航行器的横摇运动进行分析。运用频率响应法,分别在4级、5级和6级海况下,根据海浪谱密度函数和该型航行器的横摇频率响应函数,求得其横摇运动谱密度函数。再运用公式推导,得到其横摇运动的时域函数。使用MATLAB仿真软件对该型航行器进行横摇运动仿真,得到3种海况条件下,其横摇运动的时域函数图像,并验证仿真结果的准确性。仿真结论:高海况下的海况等级对无人水下航行器的横摇幅度有较大影响,满足其安全回收的海况条件为5级海况。     

Geochronology of Alkaline Rocks of the Aryskan Rare Metal Deposit,East Sayan

Doklady Earth Sciences - The temporal relations between alkaline rocks of the Aryskan rare metal (Y, REEs, Nb, Ta) deposit are determined using metamict zircon with high U and Th contents, which...     

A new method for platform design based on parametric technology

A new method for platform design, named parametric platform design method (PPDM), is presented in this paper in order to improve the mobile platform design efficiency. In this method, an integrated parametric system that fully considers the characteristics of the platform is developed, which significantly optimizes the design process with the top–bottom design concept. In the parametric system, the main geometric dimensions are taken as parameters, while the topology between the structure members, the function requirements and the safety requirements are converted into geometric constraints. By geometric constraint solving (GCS), a set of parameters that satisfy all the given constraints are determined, and then the design scheme is obtained by several core algorithms, such as parametric tank subdivision, 3D stability calculation, parametric structure design, FEM preprocessing, etc. The parametric method greatly increases the changeability and the reusability of the platform model, and concurrent design is well supported. As the model is driven by parameters, PPDM is an excellent method for optimization design. As a result, PPDM has incomparable advantages on the design efficiency over traditional methods.     

中国海滑蛤属Liocyma(双壳纲:帘蛤科)一新种

滑蛤属至今已发现的种都分布于北半球,这些种类都是冷水种。新种Liocyma chinensis是一个温水种,采自渤海莱州湾,这是滑蛤属在亚洲大陆最南的分布界线。新种的发现,增加了黄、渤海动物区系中的冷水性因素。     

连云港近岸海域沉积物中重金属污染来源及生态评价

采用等离子体发射光谱法、冷原子吸收法、原子荧光光谱法及灼烧法测定了连云港海州湾近岸表层沉积物中重金属和有机质的含量,利用主成分分析法(Principal Component Analysis,PCA)研究了沉积物中重金属的来源,发现前3个主成分的贡献率分别为54.21%、19.04%、16.37%,表明重金属主要有3个来源:工业和生活污水排放、农业灌溉水的排放、有机质降解。以PCA计算结果为基础应用海洋沉积物污染指数(Marine sediment pollution index,MSPI)和平均沉积物质量标准商数(Mean sediment quality guideline quotient,SQG-Q)评价了沉积物中重金属的污染状况及对生物的潜在影响。结果发现,海州湾近岸海区沉积物质量污染严重(MSPI值在60到80之间),排污口海区的沉积物污染最为严重(MSPI值大于80),连云港近岸海域沉积物对生物的负影响潜力为中度水平(0.1SQG-Q1)。     

彩色全息显示中液晶空间光调制器位相调制偏差的矫正方法

采用三基色激光照明并结合时分复用或空间复用技术,可实现基于液晶空间光调制器(LC-SLM)的彩色全息显示. 但由于在不同激光波长入射条件下LC-SLM的位相调制特性曲线不同,难以同时满足多波长入射条件下2π线性位相调制的要求,致使彩色全息再现结果受到共轭像和零级斑的干扰. 针对该问题,本文通过实验测试获得LC-SLM在不同波长入射时的位相调制特性曲线,并分析了RGB激光器各分量的位相调制特性曲线非线性偏差和调制幅度偏差对多阶位相型傅里叶变换相息图再现效果的影响. 根据"查表法"建立了各波长入射条件下满足2     

Sr2CoO4-δ薄膜中的自旋玻璃态的磁性质研究

用脉冲激光沉积方法(PLD)在铝酸镧衬底上制备了c取向的高氧空位含量的锶钴氧薄膜.X射线衍射分析表明薄膜单一取向且没有明显杂相.原位的高气压反射式高能电子衍射仪(RHEED)监测显示,薄膜为层状生长.通过对薄膜磁化强度随温度、磁场及时间的变化曲线进行测量,发现零场冷曲线上可能存在两个特征温度:T_f和T_a.T_f为对应玻璃态的冻结温度而T_a对应少量的不缺     

一种胶体光子晶体修饰的光纤

设计了一种胶体光子晶体修饰的光纤. 采用恒温快速蒸发法直接在经切割刀处理后的光纤端面生长胶体晶体,再与另一根切割后的光纤在毛细玻璃管中完成对接,制备成胶体光子晶体修饰的光纤. 用扫描电子显微镜和光谱分析仪对样品的形貌、结构以及光学特性进行分析. 实验结果表明,粒径为640 nm、体积分数约为0.5%的SiO₂胶体微球溶液在60 ℃的情况下沉积,大约12 h后可得到质量较高的胶体光子晶体. 在SEM下,观察到端面的胶体晶体为面心立方(fcc)结构. 透射光谱证明,该结构在(111)面上