The Relationship between Fe Mineralization and Magnetic Basement Faults using Multifractal Modeling in the Esfordi and Behabad Areas (BMD), Central Iran

Multifractal modeling is a mathematical method for the separation of a high potential mineralized background from a non-mineralized background. The Concentration-Distance to Fault structures (C-DF) fractal model and the distribution of the known iron (Fe) deposits/mines seen in the Esfordi and Behabad 1:100,000 sheets from the Bafq region of central Iran are used to distinguish Fe mineralization based on their distance to magnetic basement structures and surface faults, separately, using airborne geophysical data and field surveys. Application of the C-DF fractal model for the classification of Fe mineralizations in the Esfordi and Behabad areas reveals that the main ones show a correlation with their distance from magnetic basement structures. Accordingly, the distances of Fe mineralizations with grades of Fe higher than 55% )43% < Fe ≤ 60%) are located at a distance of less than 1 km, whereas for surfacial faults with grades of 43% ≤ Fe ≤ 60%, the distances are 3162< DF ≤ 4365 m from the faults. Thus, there is a positive relationship between Fe mineralization and magnetic basement structures. Also, the proximity evidence of Precambrian high-grade Fe mineralization related to magnetic basement structures indicates syn-rifting tectonic events. Finally, this C-DF fractal model can be used for exploration of magmatic and hydrothermal ore deposits.     

Investigation on mantle peridotites from Neyriz ophiolite, south of Iran: geodynamic signals

Neyriz ophiolite in Abadeh Tashk area appears as four major separated massifs in an area with 125 km², south of Iran. Peridotites including harzburgite, dunite, and lesser low-Cpx lherzolite are the major constituents of the ophiolite with very minor mafic rocks. Usual gabbros of ophiolite complexes are virtually absent from the study area. Mineral modality associated with bulk rock and mineral chemistry of the peridotites show a progression from fertile to ultra-refractory character, reflected by a progressive decrease in modal pyroxenes and in Al₂O₃, CaO, SiO₂, Sc, Ta, V, and Ga values of the studied rocks by approaching chromite deposits. The Neyriz peridotites vary from low-Cpx lherzolite (MgO, 41.97–43.1 wt.%; Al₂O₃, 0.8–1.3 wt.%) with low content of Cr# spinel (36.7–37.6) and Fo olivine (90.79–91.5) to harzburgite (MgO, 44.31–45.25 wt.%;Al₂O₃, 0.29–0.45 wt.%; Cr# spinel, 58.2–73.45; Fo olivine, 91.23–91.56), and then to dunite (MgO, 45.9–49.2 wt.%; Al₂O₃, 0.18–0.48 wt.%) with higher content of Cr# spinel (74.34–79.36) and Fo olivine (91.75–94.68). Compared to modern oceanic settings, mineral and rock composition of low-Cpx lherzolite plot within the field of mid-ocean-ridge environment, whereas those of harzburgite and dunite fall in the field of fore-arc peridotites. As a result of the studies on minerals and whole rock chemistry along with rock interrelationships, we contend that the peridotites were subsequently affected by percolating hydrous boninitic melt from which the high-Cr–Mg, low-Ti chromitites were formed within mantle wedge above the supra-subduction zone in a fore-arc setting.     

Signature of the upper mantle density structure in the refined gravity data

The gravitational signal of the upper mantle density structures is investigated in the refined gravity data which are corrected for the gravitational contributions of the crust density structures and the Moho geometry. The gravimetric forward modeling is applied to compute these refined gravity data globally on a 1 × 1 arcdeg grid using the global geopotential model (EGM2008), the global topographic/bathymetric model (DTM2006.0) including the ice-thickness data, and the global crustal model (CRUST2.0). The characteristics of the upper mantle density structures are further analyzed in association with the Moho parameters (i.e., Moho depths and density contrast). The 1 × 1 arcdeg global data of the Moho parameters are estimated by applying the combined least-squares approach based on solving Moritz’s generalization of the Vening–Meinesz inverse problem of isostasy. The refined gravity data exhibit mainly the mantle lithosphere structures attributed to the global mantle convection. A significant correlation found over oceans between the refined gravity data and the Moho density contrast is explained by the increasing density of the oceanic lithosphere with age. Despite the lithosphere structures attributed to the global mantle convection are confirmed also in the refined gravity data over continents, the significant correlation between the refined gravity data and the Moho parameters is in this case absent. Instead, the significant proportion of lateral variations of the Moho density contrast within the continental lithosphere is attributed to the depth-dependant density changes due to pressure and thermal gradient.     

Prediction of water inflow to mechanized tunnels during tunnel-boring-machine advance using numerical simulation

An accurate estimate of the groundwater inflow to a tunnel is one of the most challenging but essential tasks in tunnel design and construction. Most of the numerical or analytical solutions that have been developed ignore tunnel seepage conditions, material properties and hydraulic-head changes along the tunnel route during the excavation process, leading to inaccurate prediction of inflow rates. A method is introduced that uses MODFLOW code of GMS software to predict inflow rate as the tunnel boring machine (TBM) gradually advances. In this method, the tunnel boundary condition is conceptualized and defined using Drain package, which is simulated by dividing the drilling process into a series of successive intervals based on the tunnel excavation rates. In addition, the drain elevations are specified as the respective tunnel elevations, and the conductance parameters are assigned to intervals, depending on the TBM type and the tunnel seepage condition. The Qomroud water conveyance tunnel, located in Lorestan province of Iran, is 36 km in length. Since the Qomroud tunnel involved groundwater inrush during excavating, it is considered as a good case study to evaluate the presented method. The groundwater inflow to this tunnel during the TBM advance is simulated using the proposed method and the predicted rates are compared with observed rates. The results show that the presented method can satisfactorily predict the inflow rates as the TBM advances.     

Air pollution forecasting from sky images with shallow and deep classifiers

Air pollution is one of the most important problems in the new era. Detecting the level of air pollution from an image taken by a camera can be informative for the people who are not aware of exact air pollution level be declared daily by some organizations like municipalities. In this paper, we propose a method to predict the level of the air pollution of a location by taking an image by a camera of a smart phone then processing it. We collected an image dataset from city of Tehran. Afterward, we proposed two methods for estimation of level of air pollution. In the first method, the images are preprocessed and then Gabor transform is used to extract features from the images. At the end, two shallow classification methods are employed to model and predict the level of air pollution. In the second proposed method, a Convolutional Neural Network(CNN) is designed to receive a sky image as an input and result a level of air pollution. Some experiments have been done to evaluate the proposed method. The results show that the proposed 9 method has an acceptable accuracy in detection of the air pollution level. Our deep classifier achieved accuracy about 59.38% which is 10 about 6% higher than traditional combination of feature extraction and classification methods.     

Retrieving of Land Surface Temperature Using Thermal Remote Sensing and GIS Techniques in Kandaihimmat Watershed,Hoshangabad, Madhya Pradesh

Remotely sensed thermal infrared (TIR) data have been widely used to retrieve land surface temperature (LST). LST is an important parameter in the studies of urban thermal environment and dynamics. In the study, an attempt has been made using LANDSAT 8 thermal imagery to compute LST and the associated land cover parameters viz; land surface emissivity (LSE), normalized difference vegetation index (NDVI), normalized difference built-up index (NDBI) and normalized difference water index (NDWI). Landsat 8 TIRS band 10 & 11 (thermal bands) during 21 Oct. 2016, 22 Nov.2016, 24 Dec. 2016 and 09 Jan. 2017 were processed for LST analysis. However, band 5 & band 4 of the imagery was processed for NDVI, band 6 & band 5 for NDBI and band 2 & band 5 for NDWI analysis. LST has been derived from both the bands 10 &11 and validated by in-situ observations on the date and time of satellite overpass from the study area. Band 10 derived LST have shown much temperature difference while comparing with the in-situ observations. However, LST derived from band 11 found similar & close to the in-situ measurements. Relationship between band 11 results and in-situ observed measurements were developed, which has showing a strong correlation with (r² = 0.991). Land surface emissivity were also evaluated which shows variation in different land cover surfaces like vegetation, settlement, forest cover and water body. The study has proven that land surface temperature derived from satellite band 11 is the actual surface temperature of the study area.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Investigation of hydraulic fracturing operation and fracture propagation simulation in reservoir rock

For many decades most oil wells in Iran have produced using their natural flow potential and haven’t needed to be fractured. As time goes by, the reservoir pressure depletes and the need for hydraulic fracturing as a stimulation practice arises. Nonetheless there is no record of successful hydraulic fracturing in Iran.

The Bangestan reservoir with a suitable amount of oil in place and good rock reservoirs, has been selected for the present research work. In this work, the in situ stress profile was calculated by using the available petrophysical data. This is achieved by using poroelastic theory for the stresses, and the Mohr–Coulomb criterion to predict failure. The model leads to easily computed expressions for calculating the pressure required to maintain hydraulic fracturing. Then the appropriate depth for treatment was determined. The results indicate that Ilam and Sarvak formations could be good candidates for hydraulic fracturing. Then, for two layers, a hydraulic fracture was designed and the production was predicted and the Net Present Value (NPV) resulting from the fracture of both layers was investigated.     

Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.     

Short-term greenhouse emission lowering effect of biochars from solid organic municipal wastes

Qatar economy has been growing rapidly during the last two decades during which waste generation and greenhouse gas emissions increased exponentially making them among the main environmental challenges facing the country. Production of biochar from municipal solid organic wastes (SOWs) for soil application may offer a sustainable waste management strategy while improving crop productivity and sequestering carbon. This study was conducted to (1) investigate the physicochemical parameters of biochars for SOW, (2) select the best-performing biochars for soil fertility, and (3) evaluate the potential benefits of these biochars in lowering greenhouse gases (GHGs) during soil incubation. Biochars were produced from SOW at pyrolysis temperatures of 300–750 °C and residence times of 2–6 h. Biochars were characterized before use in soil incubation to select the best-performing treatment and evaluation of potential GHG-lowering effect using CO₂ emission as proxy. Here, soil–biochar mixtures (0–2%w/w) were incubated in greenhouse settings for 120 days at 10% soil moisture. Soil properties, such as pH, EC, TC, and WHC, were significantly improved after soil amendment with biochar. Two biochars produced from mixed materials at 300–500 °C for 2 h and used at 0.5–1% application rate performed the best in enhancing soil fertility parameters. A significant decrease in CO₂ emission was observed in vials with soil–biochar mixtures, especially for biochars produced at 500 °C compared the corresponding raw materials which exhibited an exponential increase in the CO₂ emission. Hence, application of biochar to agricultural soils could be beneficial for simultaneously improving soil fertility/crop productivity while sequestering carbon, thereby reducing anthropogenic emissions of GHGs.