Instability of a streaming jet under the influence of vacuum magnetic fields

The magnetohydrodynamic stability of a streaming liquid cylinder subject to surface tension and pervaded by a magnetic vacuum field has been elaborated for all axisymmetric and non-axisymmetric disturbances. The dispersion relation is obtained and studied analytically and numerically. the streaming has always a destabilizing effect. The axial magnetic fields inside and outside the jet have always stabilizing effects for all perturbations. The transverse magnetic field has a destabilizing effect. However, if the axial field intensity is so high and paramount over that the transverse field, the destabilizing character of the model is suppressed. The latter is satisfied if the Alfvén wave velocity is greater than the equilibrium liquid velocity.     

Geological and geophysical investigation of Kamil crater,Egypt

Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.     

Analysis of fracture induced scattering of microseismic shear-waves

Fractures are pervasive features within the Earth’s crust and have a significant influence on the multi-physical response of the subsurface. The presence of coherent fracture sets often leads to observable seismic scattering enabling seismic techniques to remotely locate and characterise fracture systems. In this study, we confirm the general scale-dependence of seismic scattering and provide new results specific to shear-wave propagation. We do this by generating full waveform synthetics using finite-difference wave simulation within an isotropic background model containing explicit fractures. By considering a suite of fracture models having variable fracture density and fracture size, we examine the widening effect of wavelets due to scattering within a fractured medium by using several different approaches, such as root-mean-square envelope analysis, shear-wave polarisation distortion, differential attenuation analysis and peak frequency shifting. The analysis allows us to assess the scattering behavior of parametrised models in which the propagation direction is either normal or parallel to the fracture surfaces. The quantitative measures show strong observable deviations for fractures size on the order of or greater than the dominant seismic wavelength within the Mie and geometric scattering regime for both propagation normal and parallel to fracture strike. The results suggest that strong scattering is symptomatic of fractures having size on the same order of the probing seismic wave.     

Comparison of univariate and multivariate geographically weighted regression for estimating air temperature over Iran

Station recording air temperature (T_a) has limited spatial coverage, especially in unpopulated areas. Since temperature can change greatly both spatially and temporally, stations data are often inadequate for meteorology and subsequently climatology studies. Time series of moderate-resolution imaging spectroradiometer (MODIS) land surface temperature (T_s) and normalized difference vegetation index (NDVI) products, combined with digital elevation model (DEM), albedo from Era-Interim and meteorological data from 2006 to 2015, were used to estimate daily mean air temperature over Iran. Geographically weighted regression was applied to compare univariate and multivariate model accuracy. In the first model, which only interfered with land surface temperature (LST), the results indicate a weak performance with coefficient of determination up to 91% and RMSE of 1.08 to 2.9 °C. The mean accuracy of a four-variable model (which used LST, elevation, slope, NDVI) slightly increased (6.6% of the univariate model accuracy) when compared to univariate model. RMSE dropped by 19% of the first model. By addition albedo in the third model, the coefficient of determination increased significantly. This increase was 32% of the univariate model and 23.75% of the 4-variable model accuracy. The statistical comparison between the three models revealed that there is significant improvement in air estimation by applying the geographically weighted regression (GWR) method with interfering LST, NDVI, elevation, slope, and albedo with mean absolute RMSE of 0.62 °C and mean absolute R² of 0.99. In order to better illustrate the third model, t values were spatially mapped at 0.05 level.     

Tectonic Evolution and Hydrogeological Characteristics of the Khanaser Valley,Northern Syria,Derived from the Interpretation of Vertical Electrical Soundings

The Khanaser Valley was geoelectrically thoroughly surveyed through a grid which consisted of twelve VES profiles. The tectonically-oriented Pichgin and Habibullaev method was enhanced to be applicable in areas of rugged relief and topography. The enhanced profiles were tectonically interpreted and subsurface structures within the Khanaser Valley were delineated. Accordingly, a tectonic evolutional scenario of the valley was established and its hydrogeological characteristics were derived. An approach for groundwater exploration in areas of prominent relief and topography in dry areas such as the Khanaser Valley was established and its validity was estimated.     

Combining AHP with GIS for Predictive Cu Porphyry Potential Mapping: A Case Study in Ahar Area (NW,Iran)

Using the analytic hierarchy process (AHP) method for multi-index evaluation has special advantages, while the use of geographic information systems (GIS) is suitable for spatial analysis. Combining AHP with GIS provides an effective approach for studies of mineral potential mapping evaluation. Selection of potential areas for exploration is a complex process in which many diverse criteria are to be considered. In this article, AHP and GIS are used for providing potential maps for Cu porphyry mineralization on the basis of criteria derived from geologic, geochemical, and geophysical, and remote sensing data including alteration and faults. Each criterion was evaluated with the aid of AHP and the result mapped by GIS. This approach allows the use of a mixture of quantitative and qualitative information for decision-making. The results of application in this article provide acceptable outcomes for copper porphyry exploration.     

Integrated Interpretation of Interwell Connectivity Using Injection and Production Fluctuations

A method to characterize reservoirs, based on matching temporal fluctuations in injection and production rates, has recently been developed. The method produces two coefficients for each injector–producer pair; one parameter, λ, quantifies the connectivity and the other, τ, quantifies the fluid storage in the vicinity of the pair. Previous analyses used λ and τ separately to infer the presence of transmissibility barriers and conduits in the reservoir, but several common conditions could not be easily distinguished. This paper describes how λ and τ can be jointly interpreted to enhance inference about preferential transmissibility trends and barriers. Two different combinations are useful: one is a plot of log (λ) versus log (τ) for a producer and nearby injectors, and the second is a Lorenz-style flow capacity (F) versus storativity (C) plot. These techniques were tested against the results of a numerical simulator and applied to data from the North Buck Draw field. Using the simulated data, we find that the F–C plots and the λ–τ plots are capable of identifying whether the connectivity of an injector–producer well pair is through fractures, a high-permeability layer, multiple-layers or through partially completed wells. Analysis of data from the North Buck Draw field shows a reasonable correspondence between τ and the tracer breakthrough times. Of two possible geological models for Buck Draw, the F–C and λ–τ plots support the model that has less connectivity in the field. The wells in fluvial deposits show better communication than those wells in more estuarine-dominated regions.     

Contemporary 14C radiocarbon levels of oxygenated polybrominated diphenyl ethers (O-PBDEs) isolated in sponge-cyanobacteria associations

Considerable debate surrounds the sources of oxygenated polybrominated diphenyl ethers (O-PBDEs) in wildlife as to whether they are naturally produced or result from anthropogenic industrial activities. Natural radiocarbon (¹⁴C) abundance has proven to be a powerful tool to address this problem as recently biosynthesized compounds contain contemporary (i.e. modern) amounts of atmospheric radiocarbon; whereas industrial chemicals, mostly produced from fossil fuels, contain no detectable ¹⁴C. However, few compounds isolated from organisms have been analyzed for their radiocarbon content. To provide a baseline, we analyzed the ¹⁴C content of four O-PBDEs. These compounds, 6-OH-BDE47, 2′-OH-BDE68, 2′,6-diOH-BDE159, and a recently identified compound, 2′-MeO-6-OH-BDE120, were isolated from the tropical marine sponges Dysidea granulosa and Lendenfeldia dendyi. The modern radiocarbon content of their chemical structures (i.e. diphenyl ethers, C₁₂H₂₂O) indicates that they are naturally produced. This adds to a growing baseline on, at least, the sources of these unusual compounds.     

Watershed morphometric analysis of Wadi Baish Dam catchment area using integrated GIS-based approach

The integration of Remote Sensing (RS) and Geographic Information Systems (GIS) constitutes a powerful tool for the evaluation of watershed morphometric parameters. The benefits of this integration include saving time and effort as well as improving the accuracy of the analysis. Moreover, this technique is appropriate for describing the watershed and its streams. In this study, a detailed morphometric analysis of the Wadi Baish catchment area has been performed using the Shuttle Radar Topography Mission (SRTM). The performed morphometric analysis includes linear, areal, and relief aspects. The results of the morphometric analysis reveal that the catchment can be described as of eighth stream order and consists of an area of 4741.07 km². Additionally, the basin is characterized by a relatively high mean value of bifurcation (4.012), indicative of the scarcity of permeable rocks with high slope in the area. This value of bifurcation ratio is consistent with the high drainage density value of 2.064 km/km² and confirms the impermeability of the subsurface material and mountainous relief. The hypsometric integral of the catchment is 47.4%, and the erosion integral of the catchment is 52.6%, both were indications of a mature catchment area.     

The third harmonic of type III solar radio bursts

The harmonic ratios of a large sample of inverted-U bursts are found to be smaller at the turning frequency than at the starting frequency. Ratios <2.0 are explained by postulating that the lowest fundamental frequencies emitted are prevented from escaping from the corona by an evanescent region between the source and the observer. This concept is used to construct a source model for inverted-U bursts where the density is lower inside a magnetic flux tube than it is outside.