Hydrochemical Analyses and Evaluation of Groundwater Resources of North Jordan

The hydrochemical analyses of twenty-three springs were used to determine the properties and types of groundwater of the Tertiary-Quaternary Aquifer of northern Jordan. The result shows that the geological formation influences the quality of the investigated groundwater more than the anthropogenic factors. The water of the Quaternary-Tertiary aquifer is enriched in Ca⁺⁺ due to the dissolution of the nearby carbonate rocks. The investigated water has a low EC values with Ca(Na)-HCO₃ water type. Most springs belong to this hydrochemical facies except Malka. Groundwater in the Malka wells has high salinity with NaCl waters and a strong Ca(Mg)-HCO₃ facies (900 to 1000 mg/l TDS). The area long-term hydrochemical data have been also evaluated; general trend of increase of the analyzed ion was observed. Bicarbonate represents the most abundant anion in the studied water, which exceeds the permissible limits. Nitrates (NO ₃ ^? ) also exceed the permissible limit and are the most common contaminant in the investigated water. Data on dissolved major and trace elements (K⁺, Na⁺, Mg²⁺, Ca²⁺, Cl^?, SO ₄ ^2? , Fe, Zn, Cu and Pb) in the investigated water revealed that the concentrations lie within the natural background range. The positive correlation values between various ions indicate that most of ions come from same lithological sources. According to the residual sodium carbonate, and EC values, the studied springs are suitable for agricultural purposes.     

Mineral potential mapping for rare earth elements mineralization with AHP method in the Kerman-Kashmar Tectonic Zone,Central Iran

One of the major strengths of a GIS is the ability to integrate and combine multiple layers of geoscience data for producing mineral potential maps showing favorable areas for mineral exploration. Once the data is prepared properly, the GIS, jointly with other statistical and geostatistical software packages, can be used to manipulate and visualize the data in order to produce a mineral prospectivity map. Many spatial modeling techniques can be employed to produce mineral potential maps. This paper demonstrates a technique to define favorable areas for REE mineralization with AHP technique using geological, geochemical, geophysical, alteration and faults density spatial data in the Kerman-Kashmar Tectonic Zone of central Iran. The AHP is a powerful and flexible multi-criteria decision-making tool for dealing with complex problems where both qualitative and quantitative aspects need to be considered. This approach is knowledgedriven method and can be applied in other areas for conventional use in mineral exploration.     

Plain strain soil–structure interaction model for a building supported by a circular foundation embedded in a poroelastic half-space

A simple theoretical model for soil–structure interaction in water saturated poroelastic soils is presented, developed to explore if the apparent building–foundation–soil system frequency changes due to water saturation. The model consists of a shear wall supported by a rigid circular foundation embedded in a homogenous, isotropic poroelastic half-space, fully saturated by a compressible and inviscid fluid, and excited by in-plane wave motion. The motion in the soil is governed by Biot's theory of wave propagation in fluid saturated porous media. Helmholtz decomposition and wave function expansion of the two P-wave and the S-wave potentials is used to represent the motion in the soil. The boundary conditions along the contact surface between the soil and the foundation are perfect bond (i.e. welded contact) for the skeleton, and either drained or undrained hydraulic condition for the fluid (i.e. pervious or impervious foundation). For the purpose of this exploratory analysis, the zero stress condition at the free surface is relaxed in the derivation of the foundation stiffness matrix, which enables a closed form solution. The implications of this assumption are discussed, based on published comparisons for the elastic case. Also, a closed form representation is derived for the foundation driving forces for incident plane (fast) P-wave or SV wave. Numerical results and comparison with the full-scale measurements are presented in the companion paper, published in this issue.     

Combining AHP with GIS for Predictive Cu Porphyry Potential Mapping: A Case Study in Ahar Area (NW,Iran)

Using the analytic hierarchy process (AHP) method for multi-index evaluation has special advantages, while the use of geographic information systems (GIS) is suitable for spatial analysis. Combining AHP with GIS provides an effective approach for studies of mineral potential mapping evaluation. Selection of potential areas for exploration is a complex process in which many diverse criteria are to be considered. In this article, AHP and GIS are used for providing potential maps for Cu porphyry mineralization on the basis of criteria derived from geologic, geochemical, and geophysical, and remote sensing data including alteration and faults. Each criterion was evaluated with the aid of AHP and the result mapped by GIS. This approach allows the use of a mixture of quantitative and qualitative information for decision-making. The results of application in this article provide acceptable outcomes for copper porphyry exploration.     

Analysis of fracture induced scattering of microseismic shear-waves

Fractures are pervasive features within the Earth’s crust and have a significant influence on the multi-physical response of the subsurface. The presence of coherent fracture sets often leads to observable seismic scattering enabling seismic techniques to remotely locate and characterise fracture systems. In this study, we confirm the general scale-dependence of seismic scattering and provide new results specific to shear-wave propagation. We do this by generating full waveform synthetics using finite-difference wave simulation within an isotropic background model containing explicit fractures. By considering a suite of fracture models having variable fracture density and fracture size, we examine the widening effect of wavelets due to scattering within a fractured medium by using several different approaches, such as root-mean-square envelope analysis, shear-wave polarisation distortion, differential attenuation analysis and peak frequency shifting. The analysis allows us to assess the scattering behavior of parametrised models in which the propagation direction is either normal or parallel to the fracture surfaces. The quantitative measures show strong observable deviations for fractures size on the order of or greater than the dominant seismic wavelength within the Mie and geometric scattering regime for both propagation normal and parallel to fracture strike. The results suggest that strong scattering is symptomatic of fractures having size on the same order of the probing seismic wave.     

North and south major flare periodicities during solar cycle 20

The periodicities of monthly values of major flare numbers and comprehensive major flare index (CFI) have been studied for the 20^th solar cycle. It has been proved that the periodicity 152 days exists also in the southern (S) solar hemisphere. This periodicity has been previously defined in the earlier cycles to be a northern (N) periodicity, but it has migrated to the southern hemisphere (S) during the cycles 19, 20, 21. For the whole solar disk data, it has been found that the periodicity at 78.43^d is much remarkable than its first harmonic at 156.86^d. We have also detected very strong periodicity at 548.96^d in N-hemisphere while a strong one has been found near 100^d in both solar hemispheres. The detected periodicities at 80±2^d and 101-⁺1^d seems to have a global origin . The 87.1^d periodicity is present and it is suggested that it is related to 88^d periodicity attributed to the tidal influence of the planet Mercury on sunspots. Both hemispheres present their periodicities independently.     

Simulating the urban growth dimensions and scenario prediction through sleuth model: a case study of Rasht County,Guilan, Iran

Urban growth models (UGM) as regional planning tools are of great interest for quantitative analysis of urban complex systems. In this study, the SLEUTH UGM has been calibrated through a sequential multistage automated method to derive the pattern of urban growth in Rasht County from 1975 up to year 2011. Evaluation of model goodness of fit confirms that the model is adjusted properly to the area under investigation. Four growth rules of spontaneous, new spreading center, edge and road influenced growth as well as five coefficients of diffusion, breed, spread, road gravity and slope resistance are responsible to detect quantitative aspects of urban dynamics from control years. According to the results, successive improvement of the model parameters during the calibration mode indicates applicability of the model for forecasting of future urban growth mechanism until the year 2050. Accordingly, two growth scenarios were developed mainly with the aim of investigating the coefficients’ role in controlling the nature of urban dynamics. In this concern, the spread and road gravity coefficients’ value, as two major driving forces of urban sprawl in the study area were reduced to dictate compact and infill growth, compared to their original values derived from calibration for historical prediction. Comparison between two forecasted scenarios indicates insignificant difference in total amount of the urban area, which denotes there is a threshold to urbanization and the current trend of urban growth could not be maintained. Finally, we conclude that Rasht County with considerable industrial and agricultural attractions, will witness noticeable expansion from 20,310 ha in 2011, up to 34,745 ha in 2050, accounting to 71 % increase in total area of manmade surfaces.     

The geochemistry of aliphatic and polar organic tracers in sediments from Lake Bera, Malaysia

The molecular distributions of homologous aliphatic lipid compounds (n-alkanes, n-alkanoic acids, n-alkanols, n-alkanals and n-alkan-2-ones) were investigated in sediments of Lake Bera, Malaysia as well as in plant waxes from the vicinity using gas chromatography-mass spectrometry. In addition, triterpenoids of the oleanane, ursane, lupane and friedelane series, and their diagenetic products were also identified. Using the aquatic proxy P_aq, it was found that the n-alkanes present in surface sediments S1, S5 and S6 correspond to an input from emergent macrophytes, whereas in sediments collected from open water (S2, S3 and S4) they correspond to input from submerged/floating macrophytes. The presence of n-alkan-2-ols, a commonly found homologous series in the sediments as well as in the plant wax, is novel here. In addition, the presence of 24-methylcycloart-22-enol and 24-ethylcycloart-22-enol in sediments as well as the plant wax of Pandanus helicopus, a dominant reed around the lake, also supports the input of plant biomarkers to the sediments. The occurrence of 5-membered ring triterpenoid derivatives as major diagenetic products of the triterpenoids identified (e.g. friedelan-2,3-dione) shows that the degradation of the organic matter in the sediments occurs mainly under oxic conditions. Also, the presence of ring-A degraded triterpenoids (dihydroputranjivic acid, 3-nor-2,4-seco-friedelane, 4α- and 4β-3-norfriedelanes, A-norfriedel-10-one, and A-norfriedel-8-en-10-one) and the aromatized triterpenoid hydrocarbons (mono- and triaromatic derivatives) as minor diagenetic products indicates photochemical and microorganism-mediated alteration reactions of natural products in the sediments. Additional novel polyfunctional friedelane derivatives, namely friedelane-2,3-dione, friedelane-1,3-diol-2-one and friedel-1(10)-ene-1,3-diol-2-one were identified for the first time in this study. These novel polyfunctional triterpenoids were inferred to derive from the oxidation of the triterpenoids from higher plants in this oxic tropical environment. For future reference purposes, the mass spectra of the identified polar triterpenoids are also presented here. This study provides important data on the biogeochemistry of organic matter in a tropical lake of SE Asia.     

Physical properties of three short period close binaries:KIC 2715417,KIC 6050116 and KIC 6287172

We present the physical parameters of three short period close binaries using data observed from the Kepler Space Telescope. All of these observations were taken in a single bandpass(which approximates the Johnson V-band). Our three systems are KIC 2715417, KIC 6050116 and KIC 6287172. The first system, KIC 2715417, is considered a semi-detached system with the secondary component filling its Roche lobe. The second system, KIC 6050116, is an overcontact system, while the third system, KIC 6287172, belongs to ellipsoidal variables as deduced from the Roche lobe geometry. For photometric analysis, we used the PHOEBE software package, which is based on the Wilson-Devinney code. Due to lack of spectroscopic data, the photometric mass ratios are determined from the analyses of light curves using the q-search method. The absolute parameters are determined using three different methods(Harmanec, Maceroni Van'tVeer and Gazeas Niarchos).