The multiple chronological techniques applied to the Lake Suigetsu SG06 sediment core,central Japan

The varved sediment of Lake Suigetsu (central Japan) provides a valuable opportunity to obtain high‐resolution, multi‐proxy palaeoenvironmental data across the last glacial/interglacial cycle. In order to maximize the potential of this archive, a well‐constrained chronology is required. This paper outlines the multiple geochronological techniques being applied – namely varve counting, radiocarbon dating, tephrochronology (including argon–argon dating) and optically stimulated luminescence (OSL) – and the approaches by which these techniques are being integrated to form a single, coherent, robust chronology. Importantly, we also describe here the linkage of the floating Lake Suigetsu (SG06) varve chronology and the absolute (IntCal09 tree‐ring) time scale, as derived using radiocarbon data from the uppermost (non‐varved) portion of the core. This tie‐point, defined as a distinct (flood) marker horizon in SG06 (event layer B‐07–08 at 1397.4 cm composite depth), is thus derived to be 11 255 to 11 222 IntCal09 cal. years BP (68.2% probability range).     

Relation between chemical composition and particle-size distribution of ores in the profile of nickeliferous laterite deposits of the Rio Tuba Mine, Philippines

Lateritic Ni ore mined in the Rio Tuba Mine, Philippines, derived from ultramafic rock by tropical intense weathering, is generally composed of two accumulated zones, an upper laterite zone and a lower saprolite zone. These two zones are very different in appearance, mineral assemblage, chemical composition, and in other ways. A transitional zone may be seen between the upper and lower zones, but it does not develop to any appreciable thickness. Although serpentine and goethite are still predominant in the constituent minerals, other clay minerals are increasing.

The transitional zone may be subdivided into three groups based on chemical composition. The behaviour of the chemical composition in this horizon indicates a complicated process of component transportation under the weathering process.

In the ore, chemical components are closely related in particle size of constituent minerals. In the laterite - transitional - saprolite sequence, a common variation range and tendency in chemical composition for each particle size can be seen. However, taking samples with the same particle size the chemical composition obviously differed, representing the characteristics of the components for each zone.

Concerning the correlation coefficient of the chemical components of each zone, a somewhat different inter-component relationship can be seen in these zones. These differences of correlation suggest the different complicated lateritized conditions under which they are formed.     

Crustal structure in and around the region of the 1995 Kobe Earthquake deduced from a wide-angle and refraction seismic exploration

Abstract The 1995 Kobe (Hyogo-ken Nanbu) earthquake (M_JMA 7.2, M_w 6.9) occurred on Jan. 17, 1995, at a depth of 17 km, beneath the areas of southern part of Hyogo prefecture and Awaji Island. To investigate P-wave velocity distribution and seismological characteristics in the aftershock area of this great earthquake, a wide-angle and refraction seismic exploration was carried out by the Research Group for Explosion Seismology (RGES) . The profile including 6 shot points and 205 observations was 135 km in length, extending from Keihoku, Northern Kyoto prefecture, through Kobe, to Seidan on Awaji Island. The charge of each shot was 350–700 kg. The P-wave velocity structure model showed a complicated sedimentary layer which is shallower than 2.5 km, a 2.5 km-thick basement layer whose velocity is 5.5 km/s, overlying the crystalline upper crust, and the boundary between the upper and lower crust.
Almost all aftershock hypocenters were located in the upper crust. However, the structure model suggests that the hypocenters of the main shock and some aftershock clusters were situated deeper than the boundary between the upper and lower crust. We found that the P-velocity in the upper crust beneath the northern part of Awaji Island is 5.64 km/s which is 3% lower than that of the surrounding area. The low-velocity zone coincides with the region where the high stress moment release was observed.     

Poisson's ratios of the upper and lower crust and the sub-Moho mantle beneath central Honshu, Japan

Poisson's ratios of the upper and lower crust and the sub-Moho mantle beneath central Honshu, Japan, are investigated using three independent methods that are based on S to P ratios of apparent velocities, the Wadati diagrams and an inversion of P and S arrivals. Shallow earthquakes at distances of 200—500 km from the Nagoya University Telemeter Network are used for the apparent velocity ratio method. Crustal and subcrustal earth-quakes under the network are used for the other two methods. The network consists of wide-band seismometers with three components which are particularly suitable for detecting S waves. The three different methods give a consistent result for Poisson's ratio σ, that is, (1) σ = 0.23 ± 0.01 in the upper crust, (2) σ = 0.26−0.28 in both the lower crust and in the sub-Moho mantle. The result indicates a sharp contrast in σ between the upper and the lower crust rather than at the Moho. The low σ in the upper crust can only be explained by the presence of a substantial amount of free quartz, indicating granitic rocks. A higher σ in the lower crust suggests that this portion is presumably less saturated in silica and may be even undersaturated, pointing to intermediate to mafic rocks. The sub-Moho σ is almost equal to the σ averaged over the entire upper mantle that has been estimated from the Wadati diagrams of deep shocks beneath Japan but is higher than those calculated from Pn and Sn velocities in oceanic and stable continental regions.     

Rare-earth and trace elements in the Quaternary volcanic rocks of Hokkaido,Japan

Seven rare-earth elements (La, Ce, Sm, Eu, Tb, Yb, Lu) and Co, Cr, Sc, Ba, Hf and Th have been determined by non-destructive neutron activation analysis on the Quaternary volcanic rocks in Hokkaido, Japan. The trace-element abundances are discussed in terms of the petrological problems, particularly the origin of calc-alkali magma. On the basis of the La/Sm ratio and the contents of K, Ba, Th and La, lateral variations in the contents of trace elements exist across the Kurile and the northern Honshū arcs. The calc-alkali rocks can be classified into three types which correspond to Kuno's three basalt-magma types. There is no essential difference in the rare-earth patterns between the basaltic rocks and the associated calc-alkali rocks in each petrographic province. This suggests that the calcalkali rocks may be derived from the basaltic magmas by fractional crystallization under certain conditions.     

The thermodynamic properties of the earth's lower mantle

The thermodynamic properties of the lower mantle are determined from the seismic profile, where the primary thermodynamic variables are the bulk modulus K and density ρ. It is shown that the Bullen law (K ∝ P) holds in the lower mantle with a high correlation coefficient for the seismic parametric Earth model (PEM). Using this law produces no ambiguity or trade-off between ρ₀ and K₀, since both K₀ and K′₀ are exactly determined by applying a linear K?ρ relationship to the data. On the other hand, extrapolating the velocity data to zero pressure using a Birch-Murnaghan equation of state (EOS) results in an ambiguous answer because there are three unknown adjustable parameters (ρ₀, K₀, K′₀) in the EOS.From the PEM data, K = 232.4 + 3.19 P (GPa). The PEM yields a hot uncompressed density of 3.999 ± 0.0026 g cm^?3 for material decompressed from all parts of the lower mantle. Even if the hot uncompressed density were uniform for all depths in the lower mantle, the cold uncompressed mantle would be inhomogeneous because the decompression given by the Bullen law crosses isotherms; for example, the temperature is different at different depths. To calculate the density distribution correctly, an isothermal EOS must be used along an isotherm, and temperature corrections must be placed in the thermal pressure P_TH.The thermodynamic parameters of the lower mantle are found by iteration. Values of the three uncompressed anharmonic parameters are first arbitrarily selected: α₀ (hot), the coefficient of thermal expansion; γ₀, the Grüneisen parameter; and δ, the second Grüneisen parameter. Using γ₀ and the measured ρ₀ (hot) and K₀ (hot), the values of θ₀ (Debye temperature) and q = dlnγ/dlnρ are found from the measured seismic velocities. Then from (αK_T)₀ and q the thermal pressure P_TH at all high temperatures is found. Correlating P_TH against T to the geotherm for the lower mantle, P_TH is found at all depths Z. The isothermal pressure, along the 0 K isotherm, at every Z is found by subtracting P_TH from the measured P given by the seismic model. Using the isothermal pressure at depth Z, the solution for the cold uncompressed density ρ_0C and the cold uncompressed bulk modulus, K_T0 is found as a trace in the K_T0?_ρ0C plane. A narrow band of solutions is then found for ρ_0C and K_T0 at all depths.The thermal expansion at all T is found from [ρ_0C ? ρ₀ (hot)/ρ_0C. From Suzuki's formula, the best fit to the thermal expansion determines γ₀ and α₀ (hot). When the values of these two parameters do not agree with the original assumptions, the calculation is repeated until they do agree. In this way all the important thermodynamic parameters are found as a self-consistent set subject only to the assumptions behind the equations used.     

Kinematical modeling of the Earth rotation,focusing on the Oppolzer terms in a rigid Earth and the Oppolzer-like terms in an elastic Earth

Under perturbations from outer bodies, the Earth experiences changes of its angular momentum axis, figure axis and rotational axis. In the theory of the rigid Earth, in addition to the precession and nutation of the angular momentum axis given by the Poisson terms, both the figure axis and the rotational axis suffer forced deviation from the angular momentum axis. This deviation is expressed by the so-called Oppolzer terms describing separation of the averaged figure axis, called CIP (Celestial Intermediate Pole) or CEP (Celestial Ephemeris Pole), and the mathematically defined rotational axis, from the angular momentum axis. The CIP is the rotational axis in a frame subject to both precession and nutation, while the mathematical rotational axis is that in the inertial (non-rotating) frame. We investigate, kinematically, the origin of the separation between these two axes—both for the rigid Earth and an elastic Earth. In the case of an elastic Earth perturbed by the same outer bodies, there appear further deviations of the figure and rotational axes from the angular momentum axis. These deviations, though similar to the Oppolzer terms in the rigid Earth, are produced by quite a different physical mechanism. Analysing this mechanism, we derive an expression for the Oppolzer-like terms in an elastic Earth. From this expression we demonstrate that, under a certain approximation (in neglect of the motion of the perturbing outer bodies), the sum of the direct and convective perturbations of the spin axis coincides with the direct perturbation of the figure axis. This equality, which is approximate, gets violated when the motion of the outer bodies is taken into account.     

A core-mantle interaction in the rotation of the Earth

Effects of an interaction between the mantle and the core of the Earth on its rotational motion are investigated. Assuming that the Earth consists of a rigid mantle and a rigid core with a frictional coupling and a kind of inertial coupling between them, the equations of motion are derived, and they are solved in a close approximation. The solution gives the expressions for the precession, the nutation, the secular changes in the obliquity and the rotational speed, the polar motion and so on as functions of the magnitudes of these forces. A numerical estimation shows that the effect of the friction on the amplitude and phase of the nutation is small for a reasonable intensity of the friction while inertial coupling force has a decisive influence on the amplitude, and an appropriately chosen value of the latter force gives a nutation which closely agrees with observations. It is also indicated that this torque remarkably lessens the rates of the secular changes in the obliquity and the rotational speed. The possibility of a periodical change in the amplitude of the polar motion is suggested as a result of the interaction between the two consituents.     

Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.