Softening effects of RC nonstructural flat walls on ductile concrete buildings

Nonstructural reinforced concrete flat walls architecturally designed as exterior/partition walls in concrete buildings were severely damaged by the 2011 earthquake off the Pacific coast of Tohoku. This damage was observed in the monolithic nonstructural flat walls of relatively old ductile concrete buildings. Although these flat walls might affect the overall seismic performance and behavior of a building, the nonstructural wall effects have not been clarified because of the complex interactions among the structural components. To understand these effects, this paper conducts an experimental and numerical investigation of the nonstructural wall effects, focusing on a typical residential building damaged by the 2011 earthquake. A single‐story, one‐bay moment‐resisting frame model of the building with a nonstructural flat wall was tested to clarify the fundamental behavior. The results reveal that the wall significantly contributed to the seismic performance of the overall frame until it failed in shear, subsequently losing structural effectiveness. Such experimental wall behavior could be simulated by the isoparametric element model. Moreover, the structural effects of the nonstructural flat walls on the global seismic performance and behavior of the investigated building were discussed through earthquake response analyses using ground motions recorded near the building site and pushover analyses. Consequently, the building damage could be simulated in an analytical case considering the nonstructural flat walls, showing larger inter‐story drifts in the lower stories due to softening of the walls. The analytical results also indicated that the softening of the nonstructural flat walls decreased the building ductility, as defined by ultimate inter‐story drifts. Copyright © 2017 John Wiley & Sons, Ltd.     

Further characterization of carbonaceous materials in Hayabusa‐returned samples to understand their origin

Carbonaceous materials in the sample catcher of the Hayabusa spacecraft were assigned as category 3 particles. We investigated the category 3 particles with a suite of in situ microanalytical methods. Possible contaminants collected from the cleanrooms of the spacecraft assembly and extraterrestrial sample curation center (ESCuC) were also analyzed in the same manner as category 3 particles for comparison. Our data were integrated with those of the preliminary examination team for category 3 particles. Possible origins for the category 3 particles include contamination before and after the operation of the Hayabusa spacecraft.     

Characterization of the amorphous state in metamict silicates and niobates by EXAFS and XANES analyses

X-ray absorption spectroscopy using synchrotron radiation has been applied to the investigation of the coordination geometries around Y, Zr and Nb atoms in metamict zircon, gadolinite, fergusonite, euxenite and samarskite. EXAFS and XANES spectra of their crystalline counterparts and synthetic compounds including ZrO₂, Y₂O₃, YNbTiO₆, YNbO₄, LiNbO₃, and NiNb₂O₆ were also measured for comparison. Metamict zircon shows a significant decrease in its Zr-O bond distances accompanying an increase in distortion of the Zr-O coordination polyhedra as compared with crystalline zircon. On the contrary, the average Nb-O bond distances and the symmetry of the coordination polyhedra around the Nb atoms in metamict euxenite and samarskite resemble those in the crystalline euxenite. Compared with crystalline fergusonite, a decrease in the distortion of the Nb-O octahedra is observed in metamict fergusonite. The structures of the second nearest neighbors (the metal-metal interactions) are largely disrupted in the metamict specimens except for metamict zircon and samarskite with high trivalent iron concentration. Nb in metamict samarskite is in octahedral coordination by oxygen and is similar to that in euxenite.     

Removal of Natural Free Estrogens and their Conjugates in a Municipal Wastewater Treatment Plant

Removal of natural free estrogens and estrogen conjugates in a municipal wastewater treatment plant (WWTP) was investigated and analyzed by GC‐MS, in which estrogen conjugates were first transformed to their corresponding free estrogens with an acid solvolysis procedure before their analysis. Natural free estrogens, E1‐3‐sulfate (E1‐3S), and E3‐3‐sulfate (E3‐3S) were detected with high concentrations in both the influent and effluent of the primary settling tank (PS), while no estrogen glucuronides were detected in any of the monitored wastewater samples. Regarding their removal efficiencies, all were almost completely removed, except for E1 with only a minor decrease. The estrogenic/androgenic removal of the same WWTP was also evaluated with estrogen receptor (androgen receptor) (ER (AR))‐binding assays, in which the removal efficiencies for E2 equivalents (EEQ) or testosterone equivalents (TEQ) were 68.5 and 72.2%. In addition, the chemically calculated EEQ from natural estrogens were about 20.6–39.3% that of the ER‐binding assay, in which E3 contributed the biggest proportion in both the influent and PS, while the calculated value of E1 increased from only 6.7% in the influent to as high as 20.6% in the effluent.     

Petrography of Yamato 984028 lherzolitic shergottite and its melt vein: Implications for its shock metamorphism and origin of the vein

Yamato 984028 (Y984028) is a newly identified lherzolitic shergottite, recovered from the Yamato Mountains, Antarctica, in 1999. As part of a consortium study, we conducted petrographic observations of Y984028 and its melt vein in order to investigate its shock metamorphism. The rock displays the typical non-poikilitic texture of lherzolitic shergottite, characterized by a framework of olivine, minor pyroxene (pigeonite and augite), and interstitial maskelynite. Shock metamorphic features include irregular fractures in olivine and pyroxene, shock-induced twin-lamellae in pyroxene, and the complete conversion of plagioclase to maskelynite, features consistent with those found in other lherzolitic shergottites. The melt vein is composed of coarse mineral fragments (mainly olivine) entrained in a matrix of fine-grained euhedral olivine (with several modes of compositional zoning) and interstitial glassy material. Some coarse olivine fragments consist of an assemblage of fine-grained euhedral to subhedral olivine crystals, suggesting shock-induced fragmentation, recrystallization, and/or a process of sintering. The implication is that the fine-grained olivine crystals in the matrix of the melt vein represent complicated crystallization environments and histories.     

Seismic performance evaluation and risk assessment of typical reinforced concrete frame buildings with masonry infill and conventional vertical extension in Nepal

Bulletin of Earthquake Engineering - Many reinforced concrete (RC) frame buildings in Nepal were significantly damaged by the 7.8 magnitude (Mw) earthquake in Nepal on April 25, 2015. To contribute...     

Spatial variations in throughfall in a Moso bamboo forest: sampling design for the estimates of stand‐scale throughfall

We investigated the spatial and seasonal variations in throughfall (Tf) in relation to spatial and seasonal variations in canopy structure and gross rainfall (Rf) and assessed the impacts of the variations in Tf on stand‐scale Tf estimates. We observed the canopy structure expressed as the leaf area index (LAI) once a month and Tf once a week in 25 grids placed in a Moso bamboo (Phyllostachys pubescens) forest for 1 year. The mean LAI and spatial variation in LAI did have some seasonal variations. The spatial variations in Tf reduced with increasing Rf, and the relationship between the spatial variation and the Rf held throughout the year. These results indicate that the seasonal change in LAI had little impact on spatial variations in Tf, and that Rf is a critical factor determining the spatial variations in Tf at the study site. We evaluated potential errors in stand‐scale Tf estimates on the basis of measured Tf data using Monte Carlo sampling. The results showed that the error decreases greatly with increasing sample size when the sample size was less than ～8, whereas it was near stable when the sample size was 8 or more, regardless of Rf. A sample size of eight results in less than 10% error for Tf estimates based on Student's t‐value analysis and would be satisfactory for interception loss estimates when considering errors included in Rf data. Copyright © 2009 John Wiley & Sons, Ltd.     

Phase relations in the carbon-saturated C–Mg–Fe–Si–O system and C and Si solubility in liquid Fe at high pressure and temperature: implications for planetary interiors

The phase and melting relations of the C-saturated C–Mg–Fe–Si–O system were investigated at high pressure and temperature to understand the role of carbon in the structure of the Earth, terrestrial planets, and carbon-enriched extraterrestrial planets. The phase relations were studied using two types of experiments at 4 GPa: analyses of recovered samples and in situ X-ray diffractions. Our experiments revealed that the composition of metallic iron melts changes from a C-rich composition with up to about 5 wt.% C under oxidizing conditions (ΔIW = ?1.7 to ?1.2, where ΔIW is the deviation of the oxygen fugacity (fO₂) from an iron-wüstite (IW) buffer) to a C-depleted composition with 21 wt.% Si under reducing conditions (ΔIW < ?3.3) at 4 GPa and 1,873 K. SiC grains also coexisted with the Fe–Si melt under the most reducing conditions. The solubility of C in liquid Fe increased with increasing fO₂, whereas the solubility of Si decreased with increasing fO₂. The carbon-bearing phases were graphite, Fe₃C, SiC, and Fe alloy melt (Fe–C or Fe–Si–C melts) under the redox conditions applied at 4 GPa, but carbonate was not observed under our experimental conditions. The phase relations observed in this study can be applicable to the Earth and other planets. In hypothetical reducing carbon planets (ΔIW < ?6.2), graphite/diamond and/or SiC exist in the mantle, whereas the core would be an Fe–Si alloy containing very small amount of C even in the carbon-enriched planets. The mutually exclusive nature of C and Si may be important also for considering the light elements of the Earth’s core.     

Observed and simulated sensitivities of summertime urban surface air temperatures to anthropogenic heat in downtown areas of two Japanese Major Cities,Tokyo and Osaka

In this study, the sensitivities of surface air temperatures to anthropogenic heat (AH) were investigated in downtowns of the two Japanese major cities, Tokyo and Osaka. First, meteorological measurements were made with the simultaneous monitoring of electricity demand in a contrastive couple of a downtown commercial area (C-area) and a residential area (R-area) within each city in summer 2007. From the measurements, the areal-mean surface air temperatures were obtained as \( {\overline{T}}_{\mathrm{C}} \) and \( {\overline{T}}_{\mathrm{R}} \) for each of the C-area and R-area, respectively. Using the actual electricity demand and the estimated motor fuels consumption, their areal total was evaluated as the energy-consumption-basis AH. The estimated C-areas' AH indicated greater values up to 220 W/m² on weekdays and remarkable decrease about by half on weekends, whereas that in the R-areas showed less values of 10–20 W/m² stably. Then, \( {\overline{T}}_{\mathrm{C}}-{\overline{T}}_{\mathrm{R}} \) on calm and fine days were found to be systematically decreased from weekdays to weekends in both cities roughly indicating a proportional relationship with the reductions in the C-areas' AH on weekends. The result suggested a common afternoon sensitivity for both C-areas of around 1.0°C/100 W/m², which indicated an intensity of the AH impact on surface air temperature there. Next, to simulate the observed AH impact, the authors' CM-BEM (a multilayer urban canopy model coupled with a building energy model) was newly implemented in the mesoscale Weather Research and Forecasting (WMF) model. This new system, WRF-CM-BEM, was applied to Tokyo and almost reasonably validated from the aspects of the reproducibility of urban surface air temperature and electricity demand in the observation areas. The simulations also suggested that WRF-CM-BEM underestimated the observed air temperature sensitivity to AH in the Tokyo C-area roughly by half but still in the same order of magnitude.     

Canopy structure metrics governing stemflow funnelling differ between leafed and leafless states: Insights from a large-scale rainfall simulator

An increasing number of studies have examined the effects of various biotic and abiotic factors on stemflow production. Of those that have ascribed the importance of canopy structure to stemflow production, there has been a bias towards field studies. Coupling Bayesian inference with the NIED (National Research Institute for Earth Science and Disaster Resilience, Tsukuba, Japan) large-scale rainfall simulator, this study leveraged a unique opportunity to control rainfall amounts and intensities to pinpoint the canopy structural metrics that differentially influence stemflow funnelling ratios for three common tree species between leafed and leafless canopy states. For the first time, we examined whether canopy structure metrics exert a static control on stemflow funnelling ratios or whether different elements of canopy structure are more or less important under leafed or leafless states, thereby allowing us to determine if tacit assumptions about the static influence of canopy structure on stemflow production (and funnelling) are valid (or not). Rainfall simulations were conducted at 15, 20, 30, 40, 50, and 100 mm h⁻¹ under both leafed and leafless tree conditions (12 simulations in total) to detect any differential effects on the presence or absence of foliage on stemflow funnelling ratios. For leafed conditions, the highest percentages of best-fitting models (ΔDIC ≤2) indicated that stemflow funnelling ratios were mainly controlled by total dry aboveground biomass (B_all), diameter at breast height (D_BH), total dry foliar biomass (B_f), tree height (H), and woody to foliar dry biomass ratio (BR). Whilst for the leafless state, the highest percentages of best-fitting models (ΔDIC ≤2) indicated that total dry branch biomass (B_br) was relatively dominant as was the interaction effects between crown projection area and species (CPA:species). These results compel us to reject any assumption of a static effect of different elements of canopy structure on stemflow funnelling.