Wave Dispersion Study in the Indian Ocean-Tsunami of December 26, 2004

A numerical study which takes into account wave dispersion effects has been carried out in the Indian Ocean to reproduce the initial stage of wave propagation of the tsunami event that occurred on December 26, 2004. Three different numerical models have been used: the nonlinear shallow water (nondispersive), the nonlinear Boussinesq, and the full Navier-Stokes aided by the volume of fluid method to track the free surface. Numerical model results are compared against each other. General features of the wave propagation agreed very well in all numerical studies. However some important differences are observed in the wave patterns, i.e., the development in time of the wave front is shown to be strongly connected to the dispersion effects. Discussions and conclusions are made about the spatial and temporal distribution of the free surface reaffirming that the dispersion mechanism is important for tsunami hazard mitigation.     

Transformation textures,mechanisms of formation of high‐pressure minerals in shock melt veins of L6 chondrites,and pressure‐temperature conditions of the shock events

Abstract— The high‐pressure polymorphs of olivine, pyroxene, and plagioclase in or adjacent to shock melt veins (SMVs) in two L6 chondrites (Sahara 98222 and Yamato 74445) were investigated to clarify the related transformation mechanisms and to estimate the pressure‐temperature conditions of the shock events. Wadsleyite and jadeite were identified in Sahara 98222. Wadsleyite, ringwoodite, majorite, akimotoite, jadeite, and lingunite (NaAlSi₃O₈‐hollandite) were identified in Yamato 74445. Wadsleyite nucleated along the grain boundaries and fractures of original olivine. The nucleation and growth of ringwoodite occurred along the grain boundaries of original olivine, and as intracrystalline ringwoodite lamellae within original olivine. The nucleation and growth of majorite took place along the grain boundaries or fractures in original enstatite. Jadeite‐containing assemblages have complicated textures containing “particle‐like,” “stringer‐like,” and “polycrystalline‐like” phases. Coexistence of lingunite and jadeite‐containing assemblages shows a vein‐like texture. We discuss these transformation mechanisms based on our textural observations and chemical composition analyses. The shock pressure and temperature conditions in the SMVs of these meteorites were also estimated based on the mineral assemblages in the SMVs and in comparison with static high‐pressure experimental results as follows: 13–16 GPa, >1900 °C for Sahara 98222 and 17–24 GPa, >2100 °C for Yamato 74445.     

Impact of climate change on runoff from a mid‐latitude mountainous catchment in central Japan

Hydrologic balance in high‐altitude, mid‐latitude mountain areas is important in terms of the water resources available to associated lowlands. This study examined how current and historical shifts in precipitation (P) patterns and concurrent increases in temperature (T) affected runoff (Q) and other hydrologic components in a mid‐latitude mountain catchment of central Japan, using a combination of long‐term data and a simplified hydrologic model, along with their stochastic treatment. The availability of intensive meteorological and hydrological data from the period 1997–2001 allowed the derivation of key relationships for the current climate that tie the forcing term to the parameters or state variables. By using the data recorded in the period 1965–2001, the force for driving the historical simulation was generated. Based on this model and historical shifts in P and T, the probability density functions of Q (pdf(Q)) was computed. A main novelty in this study is that such a stochastic representation, which is useful for considering the influence of projected shifts in environmental factors on the hydrologic budget, was provided. Despite the large increase in the rate of T in winter and spring, pdf(Q) in spring and summer varied appreciably during the time studied mainly because of an increase in snowmelt. An interannual change in whole‐year Q was robust to shifts in T because while Q in spring increased, in summer it decreased, implying a crucial effect of global warming on mountain hydrologic regimes is change in the timing of Q. Copyright © 2009 John Wiley & Sons, Ltd.     

Fluctuation in proteinaceous labile organic matter verified with degradation rate constants of terrestrial biochemical indicators

Biogenic amino acids, taken as representative of organic matter, were analyzed to determine the apparent degradation rate constant in boreal terrestrial sediment. Age determination using ¹⁴C dating gave two rate constants: the initial degradation rate constant for glycine (k_{GLY 1}), the simplest amino acid, was 1.5 × 10⁻³ yr⁻¹ (r = 0.97) until about 2200 yr BP. After the inflection point, the rate constant k_{GLY 2} was 9.1 × 10⁻⁵ yr⁻¹ (r = 0.73). The degradation of amino acids in the labile organic matter in the sediment was markedly affected by rapid processes. After the inflection point, the rate constant profiles for sub-surface amino acids were shown to have discontinuous relationships with sediment age. One pattern which emerged in the vertical distribution is that the biogenic amino acid degradation rate constant k was far greater in the labile organic matter phase than that in the refractory organic matter over the past 10,000 years.     

R/C frame–infill interaction model and its application to Indonesian buildings

This paper proposes a new analytical model for masonry‐infilled R/C frames to evaluate the seismic performance considering R/C frame–infill interactions. The proposed analytical model replaces masonry infill with a diagonal compression strut, which represents distributed compression transferred between frame and infill interfaces. The equivalent strut width is presented as a function of the frame–infill contact length, which can be evaluated by static equilibriums related to compression balance and lateral displacement compatibility at the frame–infill interfaces. The proposed analytical model was verified through comparisons with experimental results obtained for several brick masonry‐infilled R/C frames representing a typical R/C building with nonstructural masonry infill in Indonesia. As a result, good agreements were observed between the experimental and analytical values of the lateral strength and ductility of the infilled frames. The seismic performances of two earthquake‐damaged R/C buildings with different damage conditions were evaluated considering infill effects by applying the proposed analytical model. Consequently, the nonstructural brick masonry infill significantly affected the seismic resistances of the buildings, which seemed to lead to differing levels of damage for each building. These results indicate that the proposed analytical model can be an effective tool for more precisely screening earthquake‐vulnerable existing R/C buildings in Indonesia. Copyright © 2016 The Authors. Earthquake Engineering & Structural Dynamics Published by John Wiley & Sons Ltd.     

Phase boundary between ilmenite and perovskite structures in MnGeO3 determined by in situ X-ray diffraction measurements

In situ X-ray observations of the phase transition from ilmenite to perovskite structure in MnGeO₃ were carried out in a Kawai-type high-pressure apparatus interfaced with synchrotron radiation. The phase boundary between the ilmenite and perovskite structures in the temperature range of 700–1,400°C was determined to be P (GPa) = 16.5(±0.6) − 0.0034(±0.0006)T (°C) based on Anderson’s gold pressure scale. The Clapeyron slope, dP/dT, determined in this study is consistent with that for the transition boundary between the ilmenite and the perovskite structure in MgSiO₃.     

Did annual run‐off and low flow decrease with reduced forestry practices in Japan?

Japan developed large areas of coniferous plantations for timber production between the 1950s and 1970s; however, forestry practices such as thinning, pruning, and harvesting in most of the plantations have declined since the 1980s. Researchers speculated that reduced forestry practices could reduce run‐off and therefore available water resources. As a countermeasure to this potential risk, many local governments have introduced local taxes to stimulate forestry practices in the plantations. However, no studies have presented evidence for decreased annual run‐off and/or low flow in watersheds where forestry practices have declined. As a starting point for assessing this risk, this study examined potential changes in the annual run‐off and low flow in the Terauchi watershed. A large area of this watershed was covered with coniferous plantations. We first surveyed the annual investment in forestry operations and the number of forest owners in the city of Amagi. (Note that Amagi includes the Terauchi watershed.) Both decreased during the period 1979–2007, indicating reduced forestry practices. The frequency distribution of plantation tree ages in the watershed also suggested reduced forestry practices. After excluding the effect of precipitation, we examined potential changes in the annual run‐off and low flow during the period 1979–2007. We did not observe significant decreases in the annual run‐off and low flow during the period. Thus, the risk of decreased water resources might be less than expected, and countermeasures to the risk should be reconsidered. Copyright © 2010 John Wiley & Sons, Ltd.     

Numerical hydrodynamics of the jet phenomena in the solar atmosphere

We present a spicule model whose eruption occurs as a result of the sudden pressure enhancement at the bright point located at the root of the spicule. To show this, one dimensional (constant cross sectional) and time dependent hydrodynamic equations are solved numerically in the realistic solar atmosphere extending from the photosphere to the corona. Adiabatic motion is assumed. The pressure enhancement by a bright point at the base of the model atmosphere generates a shock wave. The shock gets stronger as it passes upward through the chromosphere and eventually collides with the chromosphere-corona interface which is a kind of a contact discontinuity. As the result, the interface begins to move upward. We identify the matter following behind this interface as the solar spicule. The model explains many observed features, such as the height and the density of the spicules, although such features have been hitherto considered not to be explained easily by shock theories.     

Coupled Simulation of Seismic Wave Propagation and Failure Phenomena by Use of an MPS Method

The failure of brittle materials, for example glasses and rock masses, is commonly observed to be discontinuous. It is, however, difficult to simulate these phenomena by use of conventional numerical simulation methods, for example the finite difference method or the finite element method, because of the presence of computational grids or elements artificially introduced before the simulation. It is, therefore, important for research on such discontinuous failures in science and engineering to analyze the phenomena seamlessly. This study deals with the coupled simulation of elastic wave propagation and failure phenomena by use of a moving particle semi-implicit (MPS) method. It is simple to model the objects of analysis because no grid or lattice structure is necessary. In addition, lack of a grid or lattice structure makes it simple to simulate large deformations and failure phenomena at the same time. We first compare analytical and MPS solutions by use of Lamb’s problem with different offset distances, material properties, and source frequencies. Our results show that analytical and numerical seismograms are in good agreement with each other for 20 particles in a minimum wavelength. Finally, we focus our attention on the Hopkinson effect as an example of failure induced by elastic wave propagation. In the application of the MPS, the algorithm is basically the same as in the previous calculation except for the introduction of a failure criterion. The failure criterion applied in this study is that particle connectivity must be disconnected when the distance between the particles exceeds a failure threshold. We applied the developed algorithm to a suspended specimen that was modeled as a long bar consisting of thousands of particles. A compressional wave in the bar is generated by an abrupt pressure change on one edge. The compressional wave propagates along the interior of the specimen and is visualized clearly. At the other end of the bar, the spalling of the bar is reproduced numerically, and a broken piece of the bar is formed and falls away from the main body of the bar. Consequently, these results show that the MPS method effectively reproduces wave propagation and failure phenomena at the same time.     

Holocene lake development and glacial-isostatic uplift at Lake Skallen and Lake Oyako,Lützow-Holm Bay,East Antarctica: Based on biogeochemical facies and molecular signatures

The paleolimnology of two lakes which were isolated as a result of the crustal uplift during the late Holocene along the Soya Coast, Lützow-Holm Bay, East Antarctica were studied. The focus was on temporal variations in the biogeochemical composition of sediment cores recovered from Lake Skallen at Skallen and Lake Oyako at Skarvsnes. Both sets of lake sediments record environmental changes associated with a transition from marine to lacustrine settings, as indicated by analyses of C and N contents, nitrogen isotopic compositions (δ¹⁵N), and major element concentrations. Changes in the dominant primary producers during the marine–lacustrine transition (marine diatom to cyanobacteria) at L. Skallen was clearly revealed by biogenic opal-A, diatom assemblages, and molecular signature from denaturing gradient gel electrophoresis (DGGE) with 16S ribosomal RNA (rRNA) gene analysis. Radiocarbon dating of acid-insoluble organic C suggested that the environmental transition from marine to fresh water occurred at 2940 ± 100 cal yr BP at L. Skallen and 1060 ± 90 cal yr BP at L. Oyako. Based on these data, a mean crustal uplift rate of 3.2 mm yr⁻¹ is inferred for the history of marine–lacustrine transition via brackish conditions. The geological setting causing glacio-isostatic uplift was the primary factor in controlling the transition event in sedimentary and biological facies.