Fish Interactions with a Commercial-Scale Tidal Energy Device in the Natural Environment

Fish are a key part of the marine ecosystem likely to be affected by hydrokinetic tidal turbines, but little is known about their behavior around such obstacles in the natural environment. In September 2010, two DIDSON acoustic cameras were used to observe fish interactions with a commercial-scale turbine in Cobscook Bay, Maine. Twenty-two hours (nearly two tidal cycles) of footage were collected. Behaviors of individual fish and schools were classified (e.g., entering, avoiding, passing, or remaining in the wake of the turbine). We analyzed the effects of turbine motion (rotating or not rotating), diel condition (day or night), and fish size (small, ≤10 cm; large, >10 cm) on individual fish behaviors, and compared behaviors of individual fish to schools of fish. When the turbine was rotating, the probability of fish entering the turbine decreased by over 35 % from when it was not. The probability that fish would enter the turbine was higher at night than during the day, and this difference was greater for small fish than for large fish (probability of small fish entering?=?0.147 day, 0.513 night; large fish?=?0.043 day, 0.333 night). Fish were almost always present in the wake of the turbine. Schools of fish had a 56 % lower probability of entering the turbine than individual fish, and reacted at greater distances from the turbine (median distance of 2.5 m for schools, 1.7 m for individuals). This study indicates that fish behavior in response to tidal turbines appears to be similar to responses to obstacles such as trawls, and highlights the importance of environmental context in determining the effects of a tidal turbine on fish.     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.     

Mineralogy and chemical composition of the clay fraction of Neogene shales from the Surma Group in the Bengal basin,Bangladesh

Mineralogical and chemical investigations (<2μm clay separates) of shale samples from the Neogene-age Surma Group obtained from four wells (Habiganj-11, Shahbazpur-1, Titas-11, Titas-15) in the Bengal basin, Bangladesh, were carried out in order to reveal the clay mineral composition as reservoir exploration and exploitation requires a good understanding of the clay minerals. The samples were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-Ray fluorescence spectrometry (XRF). Mineralogically, the sub-surface Surma Group shales comprise predominantly quartz, plagioclase, illite, chlorite, kaolinite, with lesser amounts of K-feldspar, dolomite and smectite, and minor to trace amounts of calcite, siderite and pyrite. The chemical composition of the <2 μm clay separates also suggests an illite and chlorite-rich composition. With increasing burial depth, the Surma Group shales are enriched in illite. The gradual decreasing of the smectite clays with depth and ultimate disappearance at greater depths (≥ 3000 m) may have been responsible for the presence of the diagenetic illite. Based on the mineralogical composition it is most likely that the illite-chlorite associations together with quartz and feldspar were predominantly detrital in origin and thus reflect the presence of a rapidly-rising source terrain not subjected to intense weathering.     

Regional debris flow susceptibility analysis based on principal component analysis and self-organizing map: a case study in Southwest China

A method was developed to analyze the susceptibilities of 541 regional basins affected by debris flows at the Wudongde Dam site in southwest China. Determining susceptibility requires information on source material quantity and occurrence frequency. However, the large number of debris flows can hinder the individual field investigation in a each small basin. Factors that may trigger debris flows can be identified using remotely sensed interpretation information. Susceptibility analysis can then be conducted based on these factors. In this study, SPOT5 satellite imagery, digital elevation models (DEM), a lithology distribution map, and rainfall monitoring data were used to identify 12 debris flow trigger factors: basin relief ratio, slope gradient in the initiation zone, drainage density, downslope curvature of the main channel, vegetation coverage, main channel aspect, topographic wetness index, Melton’s ruggedness number, lithology, annual rainfall, form factor, and cross-slope curvature of the transportation zone. Principal component analysis was used to obtain the eight principal components of these factors that contribute to susceptibility results. Then, a self-organizing map method was adopted to analyze the principal components, which resulted in a debris flow susceptibility classification. Field validation of 26 debris flow basins was used to evaluate the errors of the susceptibility classification, as well as assess the causes of such errors. The study found that principle component analysis and self-organizing map methodologies are good predictors of basin susceptibility to debris flows.     

Experimental study on the deterioration and natural remediation of the Ariake Sea tidal mud caused by the sea laver treatment acid practice and the upward seepage of pore water liquid

This study presents a laboratory study of the following two aspects: (1) the influence of sea laver treatment acid on the geoenvironmental properties of Ariake Sea tidal mud, and (2) the natural remediation effect on the sea laver treatment acid contaminated Ariake Sea tidal mud caused by the upward seepage of pore water liquid in the mud. Firstly, the mechanisms of the transport of sea laver treatment acid in the Ariake Sea tidal mud and the generation mechanisms of the upward seepage flow in the Ariake Sea tidal mud are discussed. Secondly, a series of one-dimensional laboratory infiltration tests were carried out to investigate the deterioration of the Ariake Sea tidal mud caused by the sea laver acid treatment practice. Test results reveal that the acid treatment practice caused considerable change in the geochemical properties of the mud in terms of increase in sulfide content and decrease in pH value. After the treatment by the sea laver treatment acid, the sulfide content of the mud even exceeded the safe limit value for the benthos, which represents undesirable living condition for benthos. Thirdly, series of laboratory fresh seawater infiltration tests for the deteriorated Iida site mud were conducted to illustrate this natural remediation efficiency. It is found that with the infiltration of the fresh seawater, the sulfide content of the Iida site mud was considerably reduced and pH value increased to an acceptable range for benthos living in the tidal flat mud. With the increase in the infiltration time and the hydraulic gradient, the remediation efficiency could be increased.     

Comparison between the TOPMODEL and the Xin’anjiang model and their application to rainfall runoff simulation in semi-humid regions

To study the application of the TOPMODEL and the Xin’anjiang model to rainfall runoff simulation in semi-humid regions, the Holtan excess infiltration runoff module was added to the TOPMODEL structure. The basin of the Heihe Jinpen Reservoir in Shaanxi Province, China, was selected as the study area. Rainfall and runoff data and digital elevation models were collected. The watershed topographic parameters and 21 floods that occurred from 2005 to 2013 were obtained to simulate rainfall runoff. Results show that the improved TOPMODEL and the Xin’anjiang model can effectively stimulate rainfall runoff. The average values of their Nash coefficient are 0.84 and 0.83, respectively, upon calibration, and 0.78 and 0.80, respectively, upon validation. The Xin’anjiang model performs slightly better than the improved TOPMODEL. The results of large flood peaks are better than those of ordinary floods. Both results can be used to simulate the rainfall runoff of a watershed.     

New record of <Emphasis Type="Italic">Plectoidothyris</Emphasis> from the Middle Jurassic Sequence of Jaisalmer Basin,Western India: Implications on the easterly brachiopod migrations

The Bathonian sediments of the Jaisalmer Basin, India host a terebratulide brachiopod Plectoidothyris which has been previously known from the Bajocian rocks of the Boreal Province. The sharp and prominent plication of the anterior commissure and increased length of costae separates the Jaisalmer specimens from other known species of the genus and the population represents an endemic species — Plectoidothyris jaisalmerensis. The population was only cursorily described earlier lacking in details of precise stratigraphic control and was wrongly assigned to a different genus. The present study is based on a large number of specimens from different localities with precise stratigraphic data, coupled with this some recent findings of time-diagnostic ammonites have helped determine the Plectoidothyris jaisalmerensis duration in the Jaisalmer Basin as the Late Bathonian. Presence of lower Jurassic Boreal brachiopod genera in the Middle Jurassic rocks of Ethiopian and Indo — Madagascan biogeographic provinces has been noticed earlier whereto Plectoidothyris is a new addition while it is also the first report of the genus from the Jurassic of India. The brachiopod migrations from the north to south of the Tethys provide evidences for opening of shallow water routes in the Tethyan seaway and are probably indicative of warmer water conditions in the Indo-Madagascan and African areas during the Middle Jurassic.     

Multivariate models for predicting glacier termini

Concerns over the rapid retreat rates of mountain glaciers have been rising as global temperatures have continued to increase. The extent of variation in the retreat of mountain glaciers can provide information about changes to different climatic conditions. Assessing the retreat rates of glaciers is crucial to assess the continuing existence of mountain glaciers and the ramifications of those retreats on water security for human societies. Therefore, mathematical and statistical models for the quantification of glacier dynamics in response to climate change are in high demand. In this research, we propose a multivariate regression model that estimates glacier change and predicts the location of glacier terminus over time, based on observed climate factors. The proposed method is applied to temporal sequences of ground observations for a number of glaciers around the globe. This model can potentially be used for monitoring glacier systems using climatic factors.