地形起伏度最佳分析区域研究

地形起伏庹是指定分析区域内最大相对高程差,反映地面相对高差,描述地貌形态的定量指标.确定实验样区的最佳分析区域是地形起伏度提取算法中的核心步骤和决定区域地形起伏度提取效果与有效性的关键.基于64幅实验样区数据进行多尺度地形起伏度计算,试图确定地形起伏度的最佳分析区域.实验结果表明:实验样区的地貌特征和最佳分析区域并不存...     

AO0235＋164射电波段宽带谱指数周期性变化的研究

收集了AO0235＋164天体射电4．8GHz和14．5GHz波段的光变测量数据,并获得了长期的光变曲线,从光变曲线可以看出其活动是非常剧烈的。利用Jurkevieh方法和自相关函数方法分别对AO0235＋164射电波段宽带谱指数进行周期性分析,并对流量和谱指数进行相关性分析,研究结果表明：（1）AO0235＋164天体射电波段4．8GHz-14．5GHz对应的宽带谱指数,可能存在5．30年的光变周期,与Liu等人用功率谱法在射电波段发现其流量密度可能存在5．59±0．47年的光变周期基本吻合;（2）宽带谱指数与流量密度之间存在相关性。     

射电类星体黑洞质量和射电特性的研究

收集了117个类星体(20个射电宁静类星体和97个射电噪类星体)的红移、热光度、H_β发射线宽度、5 100 A的单色光度、射电噪度.利用反响映射法计算了样本的黑洞质量和爱丁顿比,利用总的5 GHz流量密度计算出射电光度.分析了它们之间的相关性,得到的结论如下:(1)射电宁静类星体的黑洞质量和热光度、射电噪度、射电光度之间具有弱相关性,而射电噪类星体黑洞质量和热光度、射电噪度、射电光度之间具有强相关性;(2)射电宁静类星体热光度和射电光度、5 100 A的单色光度之间具有弱的相关性,而射电噪类星体热光度和射电光度、5 100 A的单色光度之间具有强的相关性;(3)射电宁静和射电噪类星体的黑洞质量、发射线宽度和爱丁顿比分布有差异.基于这些结果得到:射电宁静和射电噪类星体发射线宽度的差异可能是导致它们黑洞质量不同的原因;射电宁静和射电噪类星体本质的不同是由于内秉物理性质的不同造成的;黑洞质量、黑洞自旋、爱丁顿比和寄主星系形态是解释射电噪度起源和双峰状分布的重要参量;射电喷流和盘的吸积率之间具有紧密的关系.     

The unification of RBLs with XBLs

Many astronomers have discussed the property of BL Lacertae objects, including the variation of spectrum, the correlation of multi-wave bands and the property of polarization, which could give good information for studying intrinsic correlation of components and position of BL Lacertae objects. In the paper, we investigated the properties of RBLs and XBLs and RBLs/XBLs (these objects can also be found by radio survey as by X-ray survey). Firstly, we collected the light curve of 28 BL Lacertae objects, and gained their short timescales by Structure Function (SF). Secondly, we analyzed the distribution of the short timescales of some BL Lacertae objects, including 28 objects’ timescales calculated by SF, as well as the distribution of the redshift and the black hole mass and the flux densities of the multi-wavebands (radio, near-infrared, optical and Gamma-ray). Based on statistical analysis, the result of the paper support the unification model of RBLs and XBLs.     

Computing the Light Periods of Blazars with the Periodogram Spectral Analysis Method

The periodogram spectral analysis method applicable to equallyspaced time series is discussed, and the method is tested first with a simulated data series. It is confirmed that this method is effective for noisy series. Then, applying this method to the analysis of the light periods of the quasars 3C 279 and 3C 345 as well as the BL Lac objects OJ 287 and ON 231, we obtain their light periods to be 7.14 yr, 10.00 yr, 11.76 yr and 6.80 yr, respectively. These results obtained by periodogram spectral analysis are consistent with those obtained by the Jurkevich method in the literature. We have analyzed the effects of different window functions, and commented on their correct selection in practical applications.     

合成锂皂石用作钻井液造浆材料实验研究

高温下水基钻井液中膨润土颗粒会发生高温分散或高温聚结作用,从而导致钻井液性能发生剧变,针对这一问题,开展了合成锂皂石用作钻井液造浆材料实验研究。采用X射线粉晶衍射、扫描电镜及红外光谱对合成锂皂石H-6样进行了结构表征,对其分散性、抗盐性及抗温性能等进行了评价,并分析了合成锂皂石抗高温增稠机理。试验结果发现:合成锂皂石H-6样层间存在Na+与Li+两种阳离子,其阳离子交换容量(CEC)为149. 1mmol/100g,而且远高于钠膨润土的CEC值;合成锂皂石极易分散在水中,能明显提高水相的黏度,而且不受水化时间及水化温度影响。例如,当H-6加量从0. 5%增加至4%时,其分散体系的表观黏度从1. 5mPa·s增加至63. 5mPa·s;随着温度增加,合成锂皂石分散体系的表观黏度呈先增加后基本不变趋势,未出现高温明显增稠或高温减稠现象。例如,2%H-6分散体系在180～240℃高温老化后,其表观黏度在22～24mPa·s变化;合成锂皂石H-6样与其它处理剂配伍性好,采用其作为造浆材料配制的超高温水基钻井液具有优良的抗高温稳定性及高温流变性能,无需添加抗高温增黏剂及抗高温稀释剂来调整钻井液的流变性能。研究结果表明,合成锂皂石具有优良的抗高温分散性能,适合用作抗高温造浆材料,用于配制超高温水基钻井液。     

川西地区热达门石英闪长岩锆石U-Pb年龄和岩石地球化学特征:岩石成因与构造意义

川西地区热达门石英闪长岩体位于松潘-甘孜造山带北东侧。岩体的LA-ICP MS锆石U-Pb年龄为(206.4±1.4)Ma,侵位于晚三叠世。岩石Si O2含量为50.62%~56.66%,K2O/Na2O为0.32~1.20。铝饱和指数介于0.59~0.86之间,里特曼指数(σ)介于0.40~1.20之间,属于亚碱性准铝质系列岩石。岩体稀土总量∑REE介于81.45×10-6~222.39×10-6,LREE/HREE介于5.38~10.45之间,(La/Yb)N范围为5.98~12.99,δEu为0.66~1.01,δCe为0.81~0.93。岩石地球化学特征显示热达门岩石英闪长岩是在碰撞造山环境下,由岩浆上涌诱发下地壳物质部分熔融而形成的I型花岗岩。     

川南煤田龙潭组煤系泥页岩气与煤层气组合模式及合采前景分析

文中研究的上二叠统龙潭组煤层及其顶底板泥页岩含气性特征、组合模式及合采对煤系气勘探开发意义重大。为改变煤层气产业低产低效长周期的现状,实现综合效益的目标,将龙潭组作为目标层进行研究;简述了川南煤田龙潭组含气泥页岩与煤层的组合模式,并初步探讨了上述组合模式合探合采的必要性、条件和前景,并提出了开展综合勘探开采的建议。     

From micro scale to boundary value problem: using a micromechanically based model

Acta Geotechnica - A 3D multi-scale approach is presented to investigate the mechanical behavior of a macroscopic specimen consisting of a granular assembly, as a boundary value problem. The core...