The modeled atmospheric and oceanic response to the South China Sea SST anomaly

The sensitivity of the global atmospheric and oceanic response to sea surface temperature anomaly (SSTA) throughout the South China Sea (SCS) is investigated using the Fast Ocean-Atmosphere Model (FOAM). Forced by a warming SST, the experiment explicitly demonstrates that the responses of surface air temperature (SAT) and SST exhibit positive anomalous center over SCS and negative anomalous center over the Northern Pacific Ocean (NPO). The atmospheric response to the warm SST anomalies is characterized by a barotropical anomaly in middle-latitude, leading to a weak subtropical high in summer and a weak Aleutian low in winter. Accordingly, Indian monsoon and eastern Asian monsoon strengthen in summer but weaken in winter as a result of wind convergence owing to the warm SST. It is worth noting that the abnormal signals propagate poleward and eastward away in the form of Rossby Waves from the forcing region, which induces high pressure anomaly. Owing to action of the wind-driven circulation, an anomalous anti-cyclonic circulation is induced with a primary southward current in the upper ocean. An obvious cooling appears over the North Pacific, which can be explained by anomalous meridional cold advection and mixing as shown in the analysises of heat budget and other factors that affect SST.     

Growth performance of larval and juvenile manila clam (<Emphasis Type="Italic">Ruditapes philippinarum</Emphasis>) from divergently selected individuals of a full-sib family

In this study, the method of divergent selection was employed to test the larval and juvenile growth performance within a full-sib family of Manila clam Ruditapes philippinarum. The 10% largest and 10% smallest clam individuals (on the basis of shell length) of a full-sib family were selected as parents for the fast and slow growing lines, respectively. The difference in shell length was significant among the three lines (fast, control, and slow) tested. The sequence of shell length were fast line > control line > slow line. The responses to selection, realized heritability, and genetic gain were 0.06%–0.81%, 0.04%–0.47% and 0.58%–18.89% in the fast direction, respectively; and were 0.14%–1.27%, 0.08%–0.73%, and 0.31%–49.03% in the slow direction, respectively. The results suggested that there was a large portion of additive genetic variance affecting the growth in the full-sib family. Selection in the fast direction within the full-sib family would greatly improve the growth of R. philippinarum.     

The Impact of Large-Scale Reclamation on Hydro-Dynamic Environment——A Case Study of Xinghua Bay

A hydro-dynamic model is established on basis of MIKE21 FM to simulate the hydro-dynamic characteristics of Xinghua Bay and investigate the influence of reclamation project on the tidal elevation and tidal currents. Tidal elevation data was obtained at the six tide gauge stations around the Xinghua Bay, and another six current stations were established to observe the tidal current velocity and direction. Validation shows that the model-simulated tidal elevation and tidal currents agree well with observations made at different stations. Predictions are made according to the reclamation project proposed in the regional marine planning of Hanjiang Industrial Park around the port in Putian City. The variations of hydro-dynamic factors, such as tide, current velocity and direction and tidal influx are obtained, and the adverse effect of reclamation on marine environment is discussed. It is shown that the tidal level inside the Xinghua Bay during high tide decreases after the reclamation project is completed. The tidal currents during flooding tide generally decrease in the southeast of the reclamation region, with the maximum decreasing amplitude reaching 0.44 m s^-1. On the other hand, the tidal currents during flooding tide increase around the southeast and southwest corners of the reclamation region. The tidal currents during ebb tide increase around the southeast and southwest corners of the reclamation region, with the maximum increasing amplitude attaining 0.18 m s^-1. The results in this paper can give some guidance for the marine environment management and the effective utilization of land in Putian.     

Tide and current observations in the central Chukchi Sea during the summer of 2012

Current data from a moored Acoustic Doppler Current Profiler(ADCP) deployed at 69?30.155′N,169?00.654′W in the central Chukchi Sea during 2012 summertime is analyzed in the present paper.Characteristics of tidal and residual currents are ob-tained with Cosine-Lanczos filter and cross-spectral analyses.The main achievements are as follows:1) Along with the local inertial frequency of 12.8 h,two other peaks at ~12-h and ~10-d dominate the time series of raw velocity;2) The M_2 dominates the 6 resolved tide constituents with significant amplitude variations over depth and the ratios of current speed of this constituent to that of the total tidal current are 54% and 47% for u and v components,respectively.All the resolved tidal constituents rotate clockwise at depth with the exception of MM and O1.The constituents of M_2 and S_2 with the largest major semi-axes are similar in eccentricity and orientation at deeper levels;3) The maximum of residual currents varies in a range of 20–30 cms~(-1) over depth and the current with lower velocities flow more true north with smaller magnitudes compared to the current in surface layer.The ~10 d fluctuation of residual current is found throughout the water column and attributed to the response of current to the local wind forcing,with an approximate 1.4 d lag-time at the surface level and occurring several hours later in the lower layer;4) Mean residual currents flow toward the north with the magnitudes smaller than 7 cms~(-1) in a general agreement with previous studies,which suggests a relatively weaker but stable northward flow indeed exists in the central Chukchi Sea.     

Phase characteristic analysis of continuous depth air-gun source wavelet

Air guns are important sources for marine seismic exploration. Far-field wavelet of air gun arrays, as a necessary parameter for pre-stack processing and source models, plays an important role during marine seismic data processing and interpretation. When an air gun fires, it generates a series of air bubbles. Similar to onshore seismic exploration, the water forms a plastic fluid near the bubble; the farther the air gun is located from the measurement, the more steady and more accurately represented the wavelet will be. In practice, hydrophones should be placed more than 100 m from the air gun; however, traditional seismic cables cannot meet this requirement. On the other hand, vertical cables provide a viable solution to this problem. This study uses a vertical cable to receive wavelets from 38 air guns and data are collected offshore Southeast Qiong, where the water depth is over 1000 m. In this study, the wavelets measured using this technique coincide very well with the simulated wavelets and can therefore represent the real shape of the wavelets. This experiment fills a technology gap in China.     

Provenance of buried esker groundwater: the case of Vars-Winchester esker aquifer,Eastern Ontario,Canada

An innovative mode of groundwater recharge to a buried esker aquifer is considered. The current conceptual model affords a natural safeguard to underlying aquifers from the overlying muds. A hypothesis of groundwater recharge to a buried esker aquifer via preferential pathways across its overlying muds is tested here by heuristic numerical one-dimensional and two-dimensional modeling simulations. The hypothesis has been tested against two other conventionally accepted scenarios involving: (1) distal esker outcrop areas and (2) remote shallow-bedrock recharge areas. The main evidence comes from documented recharge pressure pulses in the overlying mud aquitard and in the underlying esker hydraulic-head time series for the Vars-Winchester esker aquifer in Eastern Ontario, Canada. These perturbations to the potentiometric surface are believed to be the aquifer response to recharge events. The migration rate of these pressure pulses is directly related to the hydraulic diffusivity of the formation. The measured response time and response amplitude between singular radar precipitation events and well hydrographs constituted the heuristic model calibration targets. The main evidence also includes mud-layering deformation (water escape features) which was observed in seismic surveys of the over-esker muds. These disturbed stratigraphic elements provide a realistic mechanism for migrating water to transit through the muds. The effective hydraulic conductivities of these preferential pathways in the muds were estimated to be between 2?×?10^?6 and 7?×?10^?6 m/s. The implications of these findings relate to the alleged natural safeguard of these overlying muds.     

津冀海岸线现状、变化特征及保护建议

根据覆盖全区的3期遥感影像和实地调查,以及对滨海新区和滦河口2个典型区更深入的案例研究(包括回溯至1870年、1950年的基准岸线及逐年遥感信息),对津冀沿海海岸线现状进行解译和分类,并分析岸线变化特征及成因。津冀沿海现状岸线总长度894km,可以划分为自然岸线、半开发岸线和人工岸线3类,长度分别为90km、329km和475km。1950年以前为自然因素主导的岸线变化,1950年以后变为人类活动主导的岸线向海推进,逐渐加强的人类活动至2010年达到顶峰。在全球海面上升和区域地面下沉的大背景下,海岸线的自然演化趋势应该是向陆蚀退,但是人类活动主导的岸线变化却表现为违反自然趋势的向海推进。今后,向海推进最前沿的围海造陆区将受到来自海洋越来越强烈的影响,亟需加强监测和防护。兼顾环境保护与开发两方面的长远需求,建议赋予海岸线新的定义与内涵,划定岸线保护红线,恢复部分岸线的自然属性。     

阿尔金北缘岩石变形机制——来自X光组构分析的证据

对阿尔金北缘地区变形蚀变花岗岩、花岗质糜棱岩、变形酸性火山岩和变形英安质凝灰岩中石英和绢云母2种矿物进行X光岩石组构分析,认为本区岩石变形比较明显,宏观面理近于东西向展布,绢云母变形较强,平行于面理定向排列;而石英以底面或近底面滑移为主,部分样品兼有柱面Ⅰ型滑移和柱面Ⅱ型滑移,反映本区岩石变形机制为中浅层次的脆-韧性变形(10~15km、250~350℃、0.25~0.40GPa)。通过岩石组构特征与宏观面理产状,推断本区韧性变形以右行运动为主,与板块碰撞在阿尔金北缘大平沟地区产生的韧性变形带特征一致。     

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.     

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction

Blasting is a widely used technique for rock fragmentation in opencast mines and tunneling projects. Ground vibration is one of the most environmental effects produced by blasting operation. Therefore, the proper prediction of blast-induced ground vibrations is essential to identify safety area of blasting. This paper presents a predictive model based on gene expression programming (GEP) for estimating ground vibration produced by blasting operations conducted in a granite quarry, Malaysia. To achieve this aim, a total number of 102 blasting operations were investigated and relevant blasting parameters were measured. Furthermore, the most influential parameters on ground vibration, i.e., burden-to-spacing ratio, hole depth, stemming, powder factor, maximum charge per delay, and the distance from the blast face were considered and utilized to construct the GEP model. In order to show the capability of GEP model in estimating ground vibration, nonlinear multiple regression (NLMR) technique was also performed using the same datasets. The results demonstrated that the proposed model is able to predict blast-induced ground vibration more accurately than other developed technique. Coefficient of determination values of 0.914 and 0.874 for training and testing datasets of GEP model, respectively show superiority of this model in predicting ground vibration, while these values were obtained as 0.829 and 0.790 for NLMR model.