内蒙古迪彦钦阿木斑岩钼矿床成矿流体的出溶、演化及对成矿的制约

迪彦钦阿木钼矿床位于内蒙古东乌旗地区,矿区侵入岩不发育,主要为细粒正长岩和基性岩脉,矿体主要发育在侏罗纪火山岩中,少量发育在细粒正长岩中,主要矿化类型为细网脉状、脉状、浸染状,具有斑岩型矿化特征。矿区的细粒正长岩中可见含矿石英-钾长石囊团或由之构成中心相的热液脉体,是岩浆-流体转化过程的直接证据。本文在详细岩相学观察的基础上,对石英-钾长石囊团中主要组成矿物开展了阴极发光图像分析,对石英、萤石中流体包裹体开展了显微测温实验,并借助SEM/EDS、显微激光拉曼探针、LA-ICP-MS等手段对包裹体成分进行了系统分析,基于以上实验结果对岩浆流体的出溶过程、出溶流体特征及矿质沉淀机制进行了探讨。研究结果表明,矿区钼成矿与细粒正长岩岩浆出溶流体有关;富F和挥发分造成成矿岩浆具有低的固相线温度和较低的黏度,因此成矿岩浆可以沿断裂快速上侵到地壳浅部;岩浆上侵过程中的减压沸腾可能是流体出溶的主要机制;早期出溶流体为富F和富CO₂的中高温(227～457℃)、中低盐度[w(NaCl_eq)=0.3%～8.6%]流体,由于快速减压造成流体沸腾形成低盐度富CO     

浅水障碍绕流的数值模拟

浅水流绕过岸边和固壁时常出现分离生涡、脱涡和周期流现象.文中提出参数化局部涡模型和新生涡在背景流场中输移演化及其相互作用的算法,成功地对三峡水库坝区水流横向摆动进行了数值模拟.     

新疆东准噶尔顿巴斯套金矿地质特征及矿床成因

新疆东准噶尔地区自北向南发育额尔齐斯、阿尔曼太、卡拉麦里三条大型构造带,南北两条构造带已发现大量造山型金矿,而阿尔曼太构造带与南北构造带具有相似的成矿地质背景,却未见造山型金矿的报道。因此,笔者等选取了该构造带最重要的金矿床——顿巴斯套金矿,开展了详细的岩相学、矿相学研究以及构造解析。研究表明,该矿床具有区域性断裂的次级断裂控矿、脆—韧性剪切带控矿、背斜核部控矿“三位一体”的控矿特征,其中,NW—SE向脆—韧性剪切带是最重要的控矿构造,金矿化显著晚于矿区赋矿岩浆岩——石英闪长玢岩,且该矿床与相邻构造带典型的造山型金矿地质地球化学特征相似。结合成矿流体具有中低温、富CO2的特征,综合认为顿巴斯套金矿是典型的造山型金矿。将该矿床成矿过程划分为3期：① 以产出草莓状黄铁矿为典型特征的沉积期;② 以黄铁矿压实、结核、重结晶为特征的成岩期;③ 以产出热液脉和金的矿化为典型特征的热液期。热液期进一步划分为两个阶段：以脆—韧性变形为主的铁白云石—石英—黄铁矿阶段和由脆—韧性变形向脆性变形转变的石英—钠长石—方解石阶段。黄铁矿可划分为6个世代、毒砂可划分为3个世代：① Py1为沉积成因的黄铁矿,具有草莓状、胶状等特殊结构;② Py2为成岩作用形成的黄铁矿,具有顺层分布、呈结核状等特征;③ 热液期毒砂Apy1,粒度20~50 μm,自形、半自形,常与金共生;④ 热液期毒砂Apy2,自形,粒度80~200 μm;⑤ 热液期黄铁矿Py3,他形—自形,粒度50~150 μm,以内部包体多、孔洞多为显著特征;⑥热液期黄铁矿Py4,半自形—自形,粒度100~250 μm,以包体多,孔洞少,发育压力影为特征;⑦ 热液期Py5,以背散射下亮度高、显著富As为特征;⑧ 热液期毒砂Apy3：以颗粒粗大、自形、内部包体少、发育碎裂结构和压力影为特征;⑨ 热液期黄铁Py6：以颗粒粗大、半自形到自形、内部包体少、发育碎裂结构和压力影为特征。随着脆—韧性变形作用进行,黄铁矿、毒砂的粒度有序递增,自形程度逐渐升高,而品位逐渐降低,金的沉淀主要发生在脆—韧性变形阶段,脆性变形阶段无金矿化。主成矿阶段标志性的铁白云石化蚀变、微细浸染状的黄铁矿化、毒砂化蚀变可以作为找矿标志。     

地震波阻抗约束下的储层地质建模方法与实践

以地质统计学为基础的三维地质建模技术已成为当今储层精细描述中的一项关键技术,但该项技术存在着一个最大的限制就是对硬数据的密度要求十分苛刻,因而多用于井网密度大的已开发区的储层精细描述。而在勘探区块,多采用地震属性资料作为软约束,来弥补资料不足的缺陷。本文以我国海上某油田为例,探讨了应用地震反演资料约束三维储层建模的几种方法,并提出"多条件、多级约束"的建模策略。研究表明,有效地应用包括地震信息在内的多学科信息进行岩相随机建模,能有效地弥补井间信息不足的缺陷,降低地质模型的不确定性,所建立的模型能很好地综合井资料的纵向高精度和地震资料的横向高精度信息,可以成功地应用三维随机建模技术解决勘探开发阶段的储层精细描述问题。     

跑马岗组时代涉及的若干重大问题

湖北当阳新店—跑马岗剖面的跑马岗组跨白垩系与古近系 ,所含轮藻、介形类化石的丰富程度极为罕见。跑马岗组的时代问题与白垩系 -古近系界线及其陆相辅助层型的建立、印度德干玄武岩沉积夹层的时代、印度与亚洲大陆联合的时代和白垩系 -古近系界线事件起因假说等数个重大地学问题 ,以及江汉盆地深层油气资源评价密切相关 ,值得重视 ,尽早搞清     

华北北部中元古界洪水庄组页岩地球化学特征： 物源及其风化作用

华北北部洪水庄组黑色页岩是中元古代的富有机质沉积,它可能记录了当时重要的地球化学信息。通过对洪水庄组页岩中的常量和微量元素特征的分析,研究了洪水庄组的物源及其风化作用。高Th/Sc、Al2O3/TiO2、La/Sc、La/Cr、La/Co、Th/Cr和Th/Co值,低Cr/Zr和TiO2/Zr比值,Euan值、Co/Y Ti/Zr关系和La Th Sc组成表明洪水庄组页岩物源主要为上地壳中的长英质花岗闪长岩。洪水庄组页岩的Al、Ca、Na和K组成表明其具有较高的化学蚀变指数（CIA）,同时,元素组成的化学风化作用轨迹反映了洪水庄组页岩受到钾交代作用的影响,可能导致CIA值被低估,其原始CIA值应在90以上。高的原始CIA、化学风化指数（CIW）和斜长石蚀变指数（PIA）表明洪水庄组物源区经历了强烈的化学风化作用。化学风化作用强度以及微量元素组成特征揭示了中元古代洪水庄组沉积时期可能处于温暖潮湿的气候条件,这与中元古代时期大气高CO2浓度以及华北板块古大陆当时位于低纬度地区重建的结果不谋而合。     

Eclogite relics in the Variscan orogenic belt of Bulgaria (SE Europe)

Eclogitic rocks were sampled from two zones in the basement of the Sredna Gora terrane (central western Bulgaria): (1) partially retrogressed eclogites and amphibolites embedded in sillimanite-bearing garnet-micaschists with kyanite relics and migmatites and (2) banded amphibolites associated with muscovite-bearing metagranites within two-mica paragneisses. Rutile relics and oligoclase + green hornblende + epidote ± biotite pseudomorphs after garnet suggest an eclogite facies event. A tholeiitic, transitional affinity was determined for the protoliths, suggesting a continental rift environment, consistent with several eclogite-bearing complexes in the eastern segments of the Variscan belt that arose from the Cambro-Ordovician Gondwana break-up. Decreasing pressure after the eclogite overprint was demonstrated by (a) diopside-albite symplectite, and (b) plagioclase + red–brown to green amphibole kelyphite. The early static re-equilibration, dated to 398 ± 5.2 Ma by ⁴⁰Ar–³⁹Ar technique, was followed by an amphibolite facies foliation, which was pervasive in amphibolites, gneisses and micaschists, and poorly developed in eclogites. The lithospheric PT paths corresponding to higher and lower metamorphic gradients reflect the juxtaposition of crustal and lithospheric mantle units, respectively. In the build-up of the basement of the Balkan orogen, the physical properties of the lithological complexes might have influenced the collisional pattern of involved microplates.     

Caledonian high-pressure metamorphism in the Strona-Ceneri Zone (Southern Alps of southern Switzerland and northern Italy)

The Strona-Ceneri Zone comprises a succession of polymetamorphic, pre-Alpidic basement rocks including ortho- and paragneisses, metasedimentary schists, amphibolites, and eclogites. The rock pile represents a Late Proterozoic or Palaeozoic subduction accretion complex that was intruded by Ordovician granitoids. Eclogites, which occur as lenses within the ortho-paragneiss succession and as xenoliths within the granitoids record a subduction related high-pressure event (D1) with peak metamorphic conditions of 710 ± 30 °C at 21.0 ± 2.5 kbar. After isothermal uplift, the eclogites experienced a Barrowtype (D2) tectonometamorphic overprint under amphibolite facies conditions (570-630 °C, 7-9 kbar). U-Pb dating on zircon of the eclogites gives a metamorphic age of 457 ± 5 Ma, and syn-eclogite facies rutile gives a ²⁰⁶Pb/²³⁸U age of 443 ± 19 Ma classifying the subduction as a Caledonian event. These data show that the main tectonometamorphic evolution of the Strona-Ceneri Zone most probably took place in a convergent margin scenario, in which accretion, eclogitization of MOR-basalt, polyphase (D1 and D2) deformation, anatexis and magmatism all occurred during the Ordovician. Caledonian high-pressure metamorphism, subsequent magmatism and Barrow-type metamorphism are believed to be related to subduction and collision within the northern margin of Gondwana. Editorial handling: Edwin Gnos     

地震相和测井相联合预测火山岩相分布特征研究

以火山岩的基本地质特征、测井特征与测井相及其地震相特征与地震相分类为基础,依据测井相所建立的火山岩相模式,时地震相进行标定,形成由火山岩相、测井相和地震相组成的"三相"技术.该技术建立起"三相"之间的对应关系,以揭示火山岩相空间展布规律及变化特征.将"三相"技术应用于某盆地北部地区的营城组火山岩相研究.把营城组一段的地震相转换成火山岩相,得到火山岩相的平面分布,有效地预测出某盆地北部地区营城组一段火山岩的空间展布规律和火山岩储层有利相带.钻井证实:火山岩相之通道相岩石的物性最好,侵出相和爆发相次之,火山沉积相最差;火山岩相以火山颈岩物性最好,溢流相顶部次之.     

Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

The possibility of filling empty underground spaces, which exist owing to the extraction of mineral raw materials, with fly ash and cement fly ash mixes has been studied for the purpose of reducing the impact of deep mining on the surface. The method of physical modelling was used to study the behaviour of fly ash mixes deposited in extracted mine spaces. The models were constructed for two different geometries of underground extracted mine spaces: into cavities of the type of large slits created in the course of mining in steeply lode deposits without subsequently filling the empty space and in vertical shafts of rectangular or circular cross-section with horizontal side headings that have partly caved in due to mine shocks or other seismic events.