Characteristics of Seismoelectric Wave Fields Associated with Natural Microcracks

Properties of seismoelectric waves in relation to natural earthquakes have been investigated. The electromagnetic disturbances were analyzed to test the hypothesis that pulse-like electric variations are directly related to microcracks as source. Because variation is very difficult to detect, there have been few quantitative field investigations. We used selected events with clear S and P phases from the data catalog obtained before the Tohoku earthquake in 2011. The electric strength of the fast P wave (P_f), S wave (S), and electromagnetic wave (EM) associated with formation of cracks of tensile mode were estimated. The co-seismic electric signal accompanied by the S wave has the largest strength, well above the noise level, and the EM wave has the lowest strength. Analytical estimation of the ratio of the strengths of the P_f and EM phases to that of the S phase by use of Pride’s equations gave results partially in agreement with observation (the order was Ap_f > A_s > A_em). The strength of the observed electromagnetic mode is approximately two orders of magnitude larger than that estimated from the theory. We suggest this greater strength can be attributed to the converted modes at layer contracts or to the effect of the boundary between free atmosphere and crust. Overall agreement between observations and theoretical estimates suggests that electromagnetic anomalies, crustal deformation, and groundwater changes can be investigated on the basis of the unified equations for the coupled electromagnetics, acoustics, and hydrodynamics of porous media.     

Assessing flood disaster impacts in agriculture under climate change in the river basins of Southeast Asia

Natural Hazards - This study focused on flood damage assessment for future floods under the impact of climate change. Four river basins of Southeast Asia were selected for the study. They included...     

Impact of in-consistency between the climate model and its initial conditions on climate prediction

We investigated the influence of dynamical in-consistency of initial conditions on the predictive skill of decadal climate predictions. The investigation builds on the fully coupled global model “Coupled GCM for Earth Simulator” (CFES). In two separate experiments, the ocean component of the coupled model is full-field initialized with two different initial fields from either the same coupled model CFES or the GECCO2 Ocean Synthesis while the atmosphere is initialized from CFES in both cases. Differences between both experiments show that higher SST forecast skill is obtained when initializing with coupled data assimilation initial conditions (CIH) instead of those from GECCO2 (GIH), with the most significant difference in skill obtained over the tropical Pacific at lead year one. High predictive skill of SST over the tropical Pacific seen in CIH reflects the good reproduction of El Niño events at lead year one. In contrast, GIH produces additional erroneous El Niño events. The tropical Pacific skill differences between both runs can be rationalized in terms of the zonal momentum balance between the wind stress and pressure gradient force, which characterizes the upper equatorial Pacific. In GIH, the differences between the oceanic and atmospheric state at initial time leads to imbalance between the zonal wind stress and pressure gradient force over the equatorial Pacific, which leads to the additional pseudo El Niño events and explains reduced predictive skill. The balance can be reestablished if anomaly initialization strategy is applied with GECCO2 initial conditions and improved predictive skill in the tropical Pacific is observed at lead year one. However, initializing the coupled model with self-consistent initial conditions leads to the highest skill of climate prediction in the tropical Pacific by preserving the momentum balance between zonal wind stress and pressure gradient force along the equatorial Pacific.

     

Rapid and frequent turbidite accumulation in the bottom of Izu-Ogasawara Trench: Chemical and radiochemical evidence

Two sediment cores (pilot gravity and piston) were obtained from the bottom of the Izu-Ogasawara Trench at 9750 m and analyzed for various elements and radioisotopes. The results showed a history of complex and frequent turbidite deposition: In the gravity core, eight layers rich in manganese were observed, of which five are enriched in Cu and Co as well. The other three are also enriched in Mo but no other heavy metals, suggesting the presence of at least two mechanisms of formation. Trapping of iron manganese micronodules can account for the enrichment of Mn, Cu and Co. The other three layers rich in Mn and Mo appear to be formed by a post-depositional diagenetic process of Mn mobilization and redeposition in the sediment column. A strong correlation between ²²⁶Ra and Cu in the gravity core suggests that the ²²⁶Ra was also carried into the bottom of the trench in turbidites in association with Mn micronodules. Little excess of ²¹⁰Pb over ²²⁶Ra was found at the top but the excess was significant at mid-depths from 30 to 70 cm, indicating that those sediments were deposited within the last 200 y.

In the piston core there is a sharp discontinuity of chemical and radiochemical composition around a depth of 250 cm. Below that depth the sediments appear to be dominated by materials derived from terrestrial sources, as compared with those in the upper layer which are of contemporary marine origin. ²²⁶Ra is deficient relative to ²³⁰Th throughout the sediment column down to 6 m. This finding is consistent with the finding that the average rate of sediment accumulation is 1–2 orders of magnitude faster than that in the western North Pacific abyssal plain, suggesting the convergence of materials into the bottom of the trench.     

Tidal Mixing in the Kuril Straits and Its Impact on Ventilation in the North Pacific Ocean

A numerical study using a 3-D nonhydrostatic model has been applied to baroclinic processes generated by the K ₁ tidal flow in and around the Kuril Straits. The result shows that large-amplitude unsteady lee waves are generated and cause intense diapycnal mixing all along the Kuril Island Chain to levels of a maximum diapycnal diffusivity exceeding 10³ cm²s⁻¹. Significant water transformation by the vigorous mixing in shallow regions produces the distinct density and potential vorticity (PV) fronts along the Island Chain. The pinched-off eddies that arise and move away from the fronts have the ability to transport a large amount of mixed water (∼14 Sv) to the offshore regions, roughly half being directed to the North Pacific. These features are consistent with recent satellite imagery and in-situ observations, suggesting that diapycnal mixing within the vicinity of the Kuril Islands has a greater impact than was previously supposed on the Okhotsk Sea and the North Pacific. To examine this influence of tidal processes at the Kurils on circulations in the neighboring two basins, another numerical experiment was conducted using an ocean general circulation model with inclusion of tidal mixing along the islands, which gives a better representation of the Okhotsk Sea Mode Water than in the case without the tidal mixing. This is mainly attributed to the added effect of a significant upward salt flux into the surface layer due to tidal mixing in the Kuril Straits, which is subsequently transported to the interior region of the Okhotsk Sea. With a saline flux into the surface layer, cooling in winter in the northern part of the Okhotsk Sea can produce heavier water and thus enhance subduction, which is capable of reproducing a realistic Okhotsk Sea Mode Water. The associated low PV flux from the Kuril Straits to the open North Pacific excites the 2nd baroclinic-mode Kelvin and Rossby waves in addition to the 1st mode. Interestingly, the meridional overturning in the North Pacific is strengthened as a result of the dynamical adjustment caused by these waves, leading to a more realistic reproduction of the North Pacific Intermediate Water (NPIW) than in the case without tidal mixing. Accordingly, the joint effect of tidally-induced transport and transformation dominating in the Kuril Straits and subsequent eddy-transport is considered to play an important role in the ventilation of both the Okhotsk Sea and the North Pacific Ocean. This revised version was published online in July 2006 with corrections to the Cover Date.     

Piezomagnetic potentials due to an inclined rectangular fault in a semi-infinite medium

Analytical solutions for the piezomagnetic potentials are derived for strike-slip, dip-slip and tensile-opening fault motions with arbitrary dip and strike angles, so as to be applicable in various types of earthquakes. These solutions are expressed as the composition of elementary functions which are identical to the magnetic potentials produced by magnetic dipoles, quadrupoles and octupoles distributed on the fault plane and other planes. Therefore, the geomagnetic field changes due to the piezomagnetic effect are expressed by the superposition of the fields produced by these equivalent sources.
Examples of calculated results show characteristic features for various types of fault motions as follows: (1) the pattern of the geomagnetic field changes becomes significantly different depending on the strike direction, although the maximum amplitude is almost the same for all directions; (2) the geomagnetic field change reaches a maximum at a dip angle of 90° for strike-slip and tensile-opening fault motions and at 45° for dip-slip fault motion.     

An Interpretation of the Seafloor Spreading History of the West Enderby Basin between Initial Breakup of Gondwana and Anomaly C34

The seafloor spreading evolution in the Southern Indian Ocean is key to understanding the initial breakup of Gondwana. We summarize the structural lineaments deduced from the GEOSAT 10 Hz sampled raw altimetry data as well as satellite derived gravity anomaly map and the magnetic anomaly lineation trends from vector magnetic anomalies in the West Enderby Basin, the Southern Indian Ocean. The gravity anomaly maps by both Sandwell and Smith 1997, J. Geophys. Res. 102, 10039–10054 and 10 Hz raw altimeter data show almost the same general trends. However, curved structural trends, which turn from NNW–SSE in the south to NNE–SSW in the north, are detected only from gravity anomaly maps by 10 Hz raw altimeter data just to the east of Gunnerus Ridge. NNE–SSW structural trends and magnetic anomaly lineation trends that are perpendicular to them are observed between the Gunnerus Ridge and the Conrad Rise. To the west of Gunnerus Ridge, structural elements trend NNE–SSW and magnetic polarity changes are normal to them. In contrast, almost NNW–SSE structural trends and ENE–WSW magnetic polarity reversal strikes are dominant to the east of Gunnerus Ridge. Curved structural trends, which turn from WNW–ESE direction in the south to NNE–SSW direction in the west, and magnetic polarity reversal strikes that are almost perpendicular to them are observed just south of Conrad Rise. The magnetic polarity reversals may be parts of the Mesozoic magnetic anomaly sequence that formed along side of the structural lineaments before the long Cretaceous normal polarity superchron. Curved structural trends, detected only from gravity anomaly maps by 10 Hz raw altimeter data, most likely indicate slight changes in spreading direction from an initial NNW–SSE direction to NNE–SSW. Our results also suggest that these curved structural trends are fracture zones that formed during initial breakup of Gondwana.     

Wells turbine with end plates for wave energy conversion

In order to improve the performance of the Wells turbine for wave energy conversion, the effect of end plate on the turbine characteristics has been investigated experimentally by model testing. As a result, it is found that the characteristics of the Wells turbine with end plates are superior to those of the original Wells turbine, i.e., the turbine without end plate and the characteristics are dependent on the size and position of end plate. Furthermore, by using a computational fluid dynamics (CFD), reason of the performance improvement of the turbine has been clarified and the effectiveness of the end plate has been demonstrated.     

Storage-efficient reconstruction framework for planar contours

A storage-efficient reconstruction framework for cartographic planar contours is developed. With a smaller number of control points, we aim to calculate the area and perimeter as well as to reconstruct a smooth curve. The input data forms an oriented contour, each control point of which consists of three values: the Cartesian coordinates (x, y) and tangent angle θ. Two types of interpolation methods are developed, one of which is based on an arc spline while the other one is on a cubic Hermite spline. The arc spline-based method reconstructs a G¹ continuous curve, with which the exact area and perimeter can be calculated. The benefit of using the Hermite spline-based method is that it can achieve G² continuity on most control points and can obtain the exact area, whereas the resulting perimeter is approximate. In a numerical experiment for analytically defined curves, more accurate computation of the area and perimeter was achieved with a smaller number of control points. In another experiment using a digital elevation model data, the reconstructed contours were smoother than those by a conventional method.