The evolution of massive close binaries

The results of evolutionary computations for massive binary systems (initial masses of the primary 10M ) with mass ratios between 0.3 and 0.8 are summarized and compared with observations in order to verify how far one can go with the conservative assumption of mass exchange. It is found that conservative mass exchange leads to acceptable first-order models of W-R and massive X-ray binaries. However, the comparison between this theory and observation reveals that for the observed systems (W-R and X-ray binaries) a preference exists for low intial mass ratios; moreover, the X-ray luminosities of the theoretical models are systematically too low, though this may be due to the adopted wind model. In addition, the influences of several parameters (distance between the components, chemical composition, primary mass, mass ratio and atmosphere) are examined. These parameters influence the remnant mass and any further evolution only marginally. Attention is also given to the effect on the system parameters of a supernova explosion of the remnant of the mass-losing component. For a large range of systems a disruption probability smaller than 25% is found.     

Electrochemistry of reduced sulfur species in natural waters—I. The H2S-H2O system

Careful measurements of rest potentials of platinum electrodes (Eh) in the H₂S-H₂O system were made together with measurements of the pH and the potentials of Ag-Ag₂S electrodes (E_s^2?). The potentials of the platinum electrode are characteristic of H₂S chemisorption followed by H₂S discharge on the platinum. The relations between Eh, E_s^2? and pH are characteristic of the H₂S-H₂O system and of the hydrogen sulfide concentration. Thus these parameters can be employed to distinguish H₂S-H₂O systems from H₂S-S₈-H₂O systems. Field measurements on hot sulfurous springs are in agreement with laboratory data.     

Enregistrement de la variabilité hydroclimatique au cours des 6500 dernières années sur le littoral de Cabo Frio (Rio de Janeiro,Brésil)

This study concerns a core collected in Brejo do Espinho's lagoon from Cabo Frio littoral (Brazil) submitted to dry influence of local upwelling controlled by north-east trade winds from the South Atlantic and particularly strengthened during El Niño events. Diatoms study supported by sedimentological and isotopic analyses shows dry phases infrequent before 4000 yr, a highly variable climatic phase between 3600 and 2900 yr and from 2400 yr onward a dryness enhancement. To cite this article: B. Laslandes et al., C. R. Geoscience 338 (2006).     

A framework for an optimised groundwater monitoring network and aggregated indicators

The implementation of the Water Framework Directive (EU 2000) requires a groundwater quality monitoring. It is used for characterisation of the ‘good’ chemical status of each groundwater body and for the restoration or protection purposes of those bodies already at ‘good’ status. Interpretative aspects are lying in the design of monitoring network and in the way of building global indicators. Attention is given here to the global chemical status of the groundwater bodies and to the role of diffuse pollution, much of which is brought via groundwater to surface water. Monitoring ‘local’ pollution associated with individual sites is not addressed. Groundwater bodies with different contrasted hydrogeology conditions, land use and topography have been considered to establish an approach for choosing an optimised monitoring network. Then, a quality assessment system has been developed and applied for qualifying the general status of each groundwater body. The use of non-dimensional indexes allows us to process with all kinds of chemical parameters in a normalised way and, by means of adequate aggregation rules, to qualify the general quality status of a groundwater body. The obtained diagnostic, even if not fully validated, is closely linked to the pragmatic objectives contained in the EU Water Directive.     

Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.     

地震作用下的灰坝液化特征及其动力稳定性分析--以安阳电厂为例

根据安阳电厂灰坝岩土工程性质及其动力学特性,建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析.在此基础上,在不同工况条件下对灰坝进行了抗液化安全评价及抗震稳定性分析.研究表明,在不设碎石桩、无排渗体条件下,粉煤灰子坝的抗液化安全系数Ks＜1.25,将发生液化;在设碎石桩、有排渗体条件下,粉煤灰子坝的抗液化安全系数明显提高,Ks≥1.25,不会发生液化.抗震稳定性分析表明,在上述两种工况条件下灰坝是稳定的.     

Magnetic properties of a freshly fallen LL ordinary chondrite: the Bensour meteorite

A comprehensive rock magnetic, magnetic anisotropy and paleomagnetic study has been undertaken in the brecciated LL6 Bensour ordinary chondrite, a few months only after its fall on Earth. Microscopic observations and electronic microprobe analyses indicate the presence of Ni-rich taenite, tetrataenite and rare Co-rich kamacite. Tetrataenite is the main carrier of remanence. Magnetization and anisotropy measurements were performed on mutually oriented 125 mm³ sub-samples. A very strong coherent susceptibility and remanence anisotropy is evidenced and interpreted as due to the large impact responsible for the post-metamorphic compaction of this brecciated material and disruption of the parent body. We show that the acquisition of remanent magnetization postdates metamorphism on the parent body and predates the entering of the meteorite in Earth’s atmosphere. Three components of magnetization could be isolated. A soft coherent component is closely related to the anisotropy of the meteorite and is interpreted as a shock remanent magnetization acquired during the same large impact on the parent body. Two harder components show random directions at a few mm scale. This randomness is attributed either to the formation mechanism of tetrataenite or to post-metamorphic brecciation. All components are likely acquired in very low (≈μT) to null ambient magnetic field, as demonstrated by comparison with demagnetization behavior of isothermal remanent magnetization. Two other LL6 meteorites, Kilabo and St-Mesmin, have also been studied for comparison with Bensour.     

Mechanical aspects of sedimentary basin formation: development of integrated models for lithospheric and surface processes

Different assumptions for the thermo-mechanical properties of the lithosphere strongly affect predictions inferred from quantitative sedimentary basin modeling. Examples from various basins, selected as natural laboratories, illustrate the importance of incorporating a finite strength of the extending lithosphere in forward stratigraphic modeling of large-scale basin stratigraphy. Current models can effectively couple erosion at uplifted rift shoulders of extensional basins with the basin fill architecture of the subsiding basin compartments. Modeling of the synrift strata integrates spatial scales characteristic for subbasins, such as the Oseberg field in the North Sea, with large-scale lithospheric properties characterizing the bulk strength of extending lithosphere. Modeling of compressional basins in foreland fold-and-thrust-belt settings can effectively link lithospheric flexure with surface processes. Scales pertinent to short-term spatial and temporal variations in basin fill and basin deformation can now be addressed, allowing the quantitative investigation of consequences of different modes of thrusting for basin fill geometry and facies characteristics.     

Petrogenesis of lavas from the AMAR Valley and Narrowgate region of the FAMOUS Valley, 36°–37°N on the Mid-Atlantic Ridge

Basaltic lavas from the AMAR Valley and the Narrowgate region of the FAMOUS Valley on the Mid-Atlantic Ridge (36° to 37°?N) range in texture from aphyric to highly plagioclase phyric (>25% large plagioclase phenocrysts). Based on ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios, most of these lavas can be subdivided into two distinct, isotopically homogeneous, groups: Group I has lower ⁸⁷Sr/⁸⁶Sr (0.70288±1) and higher ¹⁴³Nd/¹⁴⁴Nd (0.51312±1) ratios; Group II has higher ⁸⁷Sr/⁸⁶Sr (0.70296±1) and lower ¹⁴³Nd/¹⁴⁴Nd (0.51309±2) ratios. Most Group II lavas are aphyric, whereas Group I lavas are primarily plagioclase phyric. Lavas from both groups show a wide range in incompatible element abundance ratios (e.g., Zr/Nb =6–29; (La/Sm)_n=0.6–1.7). Aphyric lavas have relatively constant Sc (40±1.5?ppm) abundances and CaO/Al₂O₃ ratios (0.80±0.02). Group I lavas are confined primarily to the AMAR rift valley floor whereas Group II lavas are found along the east and west marginal highs. We interpret the isotopic differences between the two groups as reflecting a temporal change in the upwelling mantle beneath this region of the Mid-Atlantic Ridge which is south of the Azore Islands. For each group, a petrogenetic model consistent with the geochemical data is multi-stage decompression melting of an initially enriched, homogeneous, mantle source region. If the early derived, incompatible-element enriched, melt increments are not always pooled with subsequent increments, the erupted magma batches may have the major element characteristics of melts derived by 10 to 20% melting, but with incompatible element abundance ratios reflecting the change from an enriched to depleted source during the incremental melting process. In this process an initially homogeneous source can generate primary magmas with the required range in incompatible element abundance ratios shown by each group. The nearly constant CaO/Al₂O₃ ratios and Sc contents of the aphyric lavas with decreasing Mg?? reflects subsequent polybaric fractionation of clinopyroxene, plagioclase and olivine over the pressure interval 8–6?kbar (24–18?km), followed by rapid transport to the surface and eruption. There is no geochemical evidence for a crustal magma chamber beneath this section of the Mid-Atlantic Ridge.     

Transport in a 2-D saturated porous medium: A new method for particle tracking

A new method for solving the transport equation based on the management of a large numbe of particles in a discretized 2-D domain is presented. The method uses numerical variables to represent the number of particles in a given mesh and is more complex than the 1-D problem. The first part of the paper focuses on the specific management of particles in a 2-D problem. The method also would be valid for three dimensions as long as the medium can be modeled similar to a layered system. As the particles are no longer tracked individually, the algorithm is fast and does not depend on the number of particles present. The numerical tests show that the method is nearly numerical dispersion free and permits accurate calculations even for simulations of low-concentration transport. Because each mesh is considered as a closed system between two successive time steps, it is easy to add adsorption phenomenon without any problem of numerical stability. The model is tested under conditions that are extremely demanding for its operating mode and gives a good fit to analytical solutions. The conditions in which it can be used to best advantage are discussed.