云南大地热流及地热地质问题

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点     

突发性地面增温与临震前兆——以1988年澜沧、耿马7.6,7.2级地震为例

本文通过较多的地面温度资料分析,认为1988年11月6日澜沧、耿马地震前几天,震区及其周围大范围的突发性地面增温异常是一种临震前兆,总结了增温异常的时空演变规律与地震活动的关系,并对其形成机制提出初步想法     

隐性旅游资源显性化机理的现象学解读

在隐性与显性旅游资源二元应用性分类框架的设想下，《隐性旅游资源显性化机理的现象学解读》一文通过演绎推理、实证研究等方法，第一次运用现象学（解释学）的本质直觉学说、非实显性变样理论、“交流理性”理论等对隐性旅游资源显性化机理进行了全新解读。它提出了洞悉隐性旅游资源本质的一条基本原则——身临其境的切身体验；认为隐性旅游资源是人的体验流中的一种相对性存在形态，是旅游吸引物的非实显性组成部分；为隐性旅游资源显性化构建出价值观动力、形象思维动力和平民化意识动力；最后通过对游客体验“真实性”问题的现象学阐述，为隐性旅游资源显性化即具有吸引力，寻找到动力源泉。     

青藏高原腹地湖泊沉积对第四纪晚期古季风变化的响应

通过对青藏高原腹地的综合科学考察和对中心钻孔岩芯剖面的最新研究,用层序地层学与年代地层学和气候地层学相结合的方法,分辨出可可西里地区湖泊沉积记录(孔深7.25 m)的第四纪晚期距今3万余年以来的古气候变化,沉积物磁化率等因子综合表征的高原古季风变化是波动发展的,发生在仙女木期地质环境事件中的季风活动具有强烈暴发的特点,是高原季风发展中的突变事件,而且地表热点效应对其起到了激发作用。综合分析的研究成果表明,它的变化频谱与激变因子及其运行机制是伴随着青藏高原地质效应的演变而发展的,为研究第四纪冰消期以来的气候变化提供了新的信息。     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

湘阴县氏族移民地理研究（1211735年）

历史人口迁移是历史时期区域人地关系演变的最直接的动力。通过对121¹375年间湘阴县外来氏族移民过程与空间分布的分析,发现:他们无论是直接迁入还是辗转迁入,绝大多数都是为了土地和生存而来;67.2%的氏族祖籍江西,地缘上的亲和力和血缘上的凝聚力导致了氏族移民迁出地的邻近性和入居地的集聚性;69.6%的外来氏族在明代迁入,后唐同光年间,元末明初,明末清初为三个氏族移民高峰期;不同时期有着不同的氏族移民来源地,不同时期的氏族移民入居到不同的地理空间。随着时间的推移,湘阴县氏族移民入居地从丘陵平原向河湖滩地拓展的演变,反映了湘阴县域乃至整个洞庭湖区从丘陵到平原再到湖区的区域开发过程。     

长白山圆池泥炭氮元素分布特征及其影响因素分析

通过对长白山圆池4个泥炭剖面样品的分析,揭示了其氮元素分布规律。在圆池选取4个具有代表性的采样点,利用泥炭采样器采取新鲜泥炭样品。分析结果表明,4个泥炭剖面氮元素含量在0.014%~3.353%之间;剖面间相比较,其中贫营养泥炭整体含氮量较低;4个泥炭剖面的氮元素分布呈现明显规律,受泥炭上层不同植物、泥炭水分和有机质含量等因素的影响,泥炭剖面中氮元素累积峰可能出现在剖面的表层(0~5cm)或中间层(10~20cm);泥炭剖面氮元素与有机质呈极显著的正相关;泥炭剖面C/N比值变化在9.51~66.98之间,部分剖面层位C/N比值异常高,表明该层位碳的累积速度显著高于氮元素。     

Water–rock interaction during the process of steam stimulation exploitation of viscous crude oil in Liaohe Shuguang Oil Field, Liaoning, China

In the process of steam stimulation exploitation of viscous crude oil, the injected water, at high temperature and under high pressure, reacts intensively with the host rock. This kind of water–rock interaction in Liaohe Shuguang Oil Field was studied on the basis of analysis of water composition changes, laboratory experiments, mineral saturation indices analysis, and mass balance calculation. Compared with the injected water, the changes of the composition of discharged water are mainly the distinct decrease of pH, Na⁺, SiO₂ and Cl⁻, as well as the increase of K⁺, Ca²⁺, Mg²⁺, SO ₄ ²⁻ and HCO ₃ ⁻ . Laboratory experiments under field conditions showed: the dissolution sequence of minerals quantitatively is quartz>potassium feldspar>albite, and the main change of clay minerals is the conversion of kaolinite to analcime. Mass balance calculation indicated during the process of steam stimulation, large quantities of analcime are precipitated with the dissolution of large amounts of quartz, kaolinite, potassium feldspar, and CO₂. These results correlated very well with the experimental results. The calculated results of Liaohe Shuguang Oil Field showed that during the steam stimulation for viscous crude oil, the amounts of minerals dissolved (precipitated) are huge. To control the clogging of pore spaces of oil reservoirs, increased study of water–rock interaction is needed.     

A Connectivity Index for Discrete Fracture Networks

Connectivity is an important measure for assessing flow transport in rock, especially through fractures. In this paper, rock fracture systems are modelled by a discrete fracture model simulated by a marked point process. A connectivity index is then introduced to quantify the connectivity between any two points in space. Monte Carlo simulation is used to evaluate the connectivity index for stationary cases and relationships between the connectivity index and the parameters of the discrete fracture model are analysed. The average number of intersections per fracture, X_f, and the fracture intensity, P12 (P32), are calculated and the relationships between these parameters and the connectivity index are investigated, concluding that X_f is the more suitable parameter for the classification of rock mass flow properties. The relationships between the connectivity index and the percolation state of the fractured medium are also discussed. An edge correction is briefly discussed and a practical example is used to demonstrate the method of computing the connectivity index.