鄂尔多斯古生界流体包裹体特征及其与油气演化关系

对鄂尔多斯盆地奥陶系碳酸盐岩、石炭-二叠系石英砂岩成岩作用研究的基础上,分别对上述岩石流体包裹体作了初步研究。奥陶系碳酸盐岩包裹体均一温度具有三个区段 :6 0～ 10 0℃,10 0～ 16 0℃,16 0～ 2 2 0℃;石炭-二叠系石英砂岩包裹体均一温度三个区段为 90～ 110℃,12 0～ 14 0℃,16 0～ 2 2 0℃。并利用包裹体测温资料结合已有的镜质体反射率、磷灰石裂变径迹等研究成果,对流体包裹体在鄂尔多斯盆地油气田形成、演化中应用作了初步探讨。     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.     

异珊瑚隔壁的排布系列

异珊瑚原始隔壁数目、后生隔壁的增生部位和方式以及隔壁的排布系列的研究，是探讨异珊瑚的起源、演化和分类的基本前提。通过对3隔壁的Triphyllia和4隔壁的Quadratphyllia二属的研究，结合生物体对称的原则，提出异珊瑚原始隔壁为2条，并认为异珊瑚的后生隔壁发育在原始隔壁所分隔的左右两侧部体腔内缘部位，长隔壁呈树枝状拓布或者末端达中心向某一方面扭曲连接形成轴管构造。依据后生隔壁在体腔内的繁生能力、增殖数量、发生部位、排布方式、分化程度、隔壁始端在外壁中的埋植类型和末端在中心部位的连接类型等方面的不同，异珊瑚隔壁增生大致可划分为7个布系列。     

安徽凤阳和张八岭地区含金石英脉的40Ar/39Ar年龄及其地质意义

用快中子活化法测定了安徽凤阳和张八岭地区朱顶、毛山和上成3个金矿床第一阶段晚期和第二阶段的含金石英脉,石英的阶段加热40Ar/39Ar坪年龄值域为(116.1±0.6～118.3±0.5)Ma,分别与其最小视年龄和等时线年龄接近.坪年龄、最小视年龄和等时线年龄3种年龄值域为(113.4±0.4～118.3±0.5)Ma,可以作为石英的形成年龄域. 根据含金石英脉和围岩的空间关系,该年龄值域作为石英脉金矿的形成年龄是合理可靠的.金矿床形成于早白垩世阿普特期,与此时郯庐断裂带略带右行走滑正断层活动一致.     

Integrated Two-Dimensional Modeling of Fluid Flow and Compaction in a Sedimentary Basin

In this paper we employ mixed finite elements and numerically study an integrated two-dimensional model of fluid flow and compaction in a sedimentary basin. This model describes a single phase incompressible flow in a two-dimensional section of a sedimentary basin with vertical compaction. At each time step, an iterative algorithm is used to solve this model. The determination of the grid movement is based on the mass conservation and movement of sediments in the basin, while the mixed method is utilized to solve the fluid flow over the moving grid. Numerical experiments are presented to verify this iterative algorithm and show representative solutions for the model under consideration.     

隔震及超高层建筑的地震反应观测

2001年5月24日和6月20日分别发生了宜良4.2级和呈南3.6级两次地震，架设在云南省抗震培训中心隔震大楼和昆明佳华广场的结构强震观测台阵记录了这两栋建筑物对这两次地震反应。本介绍了获取的记录，并分析了两栋建筑物的地震反应情况。     

X线侧位片与高分辨率CT对鼻骨骨折的对比研究

目的　通过86例鼻骨骨折的鼻骨X线侧位片与高分辨率CT(HRCT）对比研究，确定HRCT检查对鼻骨骨折的诊断价值。材料与方祛　86例鼻外伤或/和He、面外伤的患者均进行了鼻骨X线侧位摄影、HRCT扫描检查，经集体讨论，由有经验的放射医师对全部影像资料进行分析并进行统计学处理。结果HRCT显示所有的86例鼻骨骨折，但在此86例骨折中X线平片只显示了35例阳性，包括15例鼻骨汇合部骨折，7例双侧鼻骨骨折，3例复合骨折(鼻骨汇合部及双侧鼻骨骨折)，l0例鼻区骨折。X线平片显示5l例为阴性。结论　对鼻骨骨折的诊断，HRCT明显优于鼻骨X线侧位片，HRCT扫描检查可提高X线隐性鼻骨骨折的诊断，并可明确鼻骨骨折的类型、范围和程度，为临床诊断和治疗提供可靠的依据。     

薄钢板剪力墙抗震性能试验研究

通过4个薄钢板剪力墙和1个钢筋混凝土框架的试验，研究了薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙在低周往复荷载作用下的刚度、承载力、延性和耗能性能。试验表明，利用薄钢板剪力墙作为抗侧力构件是可行的。在钢筋混凝土框架中设置薄钢板可有效地增加刚度，承载力和耗能性能。     

当前我国地震预报面临的主要科学问题及其建议

论述了我国目前在长期、中期和短临预报中所面临的主要科学问题，提出了从哪些方面进行突破的建议。     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.