A simplified method for analyzing the fundamental frequency of monopile supported offshore wind turbine system design

Preliminary design of offshore wind turbines requires high precision simplified methods for the analysis of the system fundamental frequency. Based on the Rayleigh method and Lagrange's Equation, this study establishes a simple formula for the analysis of system fundamental frequency in the preliminary design of an offshore wind turbine with a monopile foundation. This method takes into consideration the variation of cross-section geometry of the wind turbine tower along its length, with the inertia moment and distributed mass both changing with diameter. Also the rotational flexibility of the monopile foundation is mainly considered. The rigid pile and elastic middle long pile are calculated separately. The method is validated against both FEM analysis cases and field measurements, showing good agreement. The method is then used in a parametric study, showing that the tower length Lt, tower base diameter d0, tower wall thickness δt, pile diameter db and pile length Lb are the major factors influencing the fundamental frequency of the offshore wind turbine system. In the design of offshore wind turbine systems, these five parameters should be adjusted comprehensively. The seabed soil condition also needs to be carefully considered for soft clay and loose sand.     

A Note on Reviving the Goddard Satellite-Based Surface Turbulent Fluxes （GSSTF） Dataset

Accurate sea surface flux measurements are crucial for understanding the global water and energy cycles. The oceanic evaporation, which is a major component of the global oceanic fresh water flux, is useful for predicting oceanic circulation and transport. The global Goddard Satellite-based Surface Turbulent Fluxes Version-2 (GSSTF2; July 1987--December 2000) dateset that was officially released in 2001 has been widely used by scientific community for global energy and water cycle research, and regional and short period data analyses. We have recently been funded by NASA to resume processing the GSSTF dataset with an objective of continually producing a uniform dataset of sea surface turbulent fluxes, derived from remote sensing data. The dataset is to be reprocessed and brought up-to-date (GSSTF2b) using improved input datasets such as a recently upgraded NCEP/DOE sea surface temperature reanalysis, and an upgraded surface wind and microwave brightness temperature V6 dataset (Version 6) from the Special Sensor Microwave Imager (SSM/I) produced by Remote Sensing Systems (RSS). A second new product (GSSTF3) is further proposed with a finer temporal (12-h) and spatial (0.25^ox0.25^o) resolution. GSSTF2b (July 1987--December 2008) and GSSTF3 (July 1999--December 2009) will be released for the research community to use by late 2009 and early 2011, respectively.     

相态研究在化探异常评价中的应用——以马架子水系沉积物异常评价为例

利用相态研究可确定异常元素的赋存状态,马架子水系沉积物综合异常强度高,浓集中心明显,经过几次异常检查及查证,未获得良好的找矿效果,引起异常的成因机制不清。对异常样品中元素在氧化物相、结合相及硫化物相中分配的综合研究证实,Ph、Zn元素主要是以均匀分散形式存在于岩石中,为非矿致异常,从而节省了大量的人力、财力及物力,为异常查证及评价提供了一套新的思路。     

Bulk Transfer Relations for the Roughness Sublayer

In the roughness sublayer (RSL), Monin–Obukhov surface layer similarity theory fails. This is problematic for atmospheric modelling applications over domains that include rough terrain such as forests or cities, since in these situations numerical models often have the lowest model level located within the RSL. Based on empirical RSL profile functions for momentum and scalar quantities, and scaling the height with the RSL height z _*, we derive a simple bulk transfer relation that accounts for RSL effects. To verify the validity of our approach, these relations are employed together with wind speed and temperature profiles measured over boreal forest during the BOREAS experimental campaign to estimate momentum and heat fluxes. It is demonstrated that, when compared with observed flux values, the inclusion of RSL effects in the transfer relations yields a considerable improvement in the estimated fluxes.     

Errors and correction of precipitation measurements in China

In order to discover the range of various errors in Chinese precipitation measurements and seek a correction method, 30 precipitation evaluation stations were set up countrywide before 1993. All the stations are reference stations in China. To seek a correction method for wind-induced error, a precipitation correction instrument called the ＂horizontal precipitation gauge＂ was devised beforehand. Field intercomparison observations regarding 29,000 precipitation events have been conducted using one pit gauge, two elevated operational gauges and one horizontal gauge at the above 30 stations. The range of precipitation measurement errors in China is obtained by analysis of intercomparison measurement results. The distribution of random errors and systematic errors in precipitation measurements are studied in this paper. A correction method, especially for wind-induced errors, is developed. The results prove that a correlation of power function exists between the precipitation amount caught by the horizontal gauge and the absolute difference of observations implemented by the operational gauge and pit gauge. The correlation coefficient is 0.99. For operational observations, precipitation correction can be carried out only by parallel observation with a horizontal precipitation gauge. The precipitation accuracy after correction approaches that of the pit gauge. The correction method developed is simple and feasible.     

Surface and groundwater quality characterization of Deoria District,Ganga Plain,India

A water quality investigation was carried out in the Deoria district, Ganga plain, to assess the suitability of surface and groundwaters for domestic, agricultural, and industrial purposes. As much as 50 representative samples from river and groundwater were collected from various stations to monitor the water chemistry of various ions, comprising Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ⁻, SO₄ ²⁻, NO₃ ⁻, Cl⁻, F⁻, and trace metals, such as Fe, Cu, Mn, Zn, Cd, and Pb. The results showed that electrical conductance (EC), total dissolved solids (TDS), HCO₃ ⁻, Mg²⁺, Na⁺, and total hardness (TH) are above the maximum desirable limit, and apart from Fe and Mn all other trace metals are within the maximum permissible limit for drinking water. The calculated values for sodium absorption ratio (SAR), salinity, residual sodium carbonate (RSC), and permeability index (PI) indicate well to permissible use of water for irrigation. High values of Na%, RSC, and Mg-hazard (MH) at some stations restrict its use for agricultural purpose. Anthropogenic activities affect the spatial variation of water quality. Economic and social developments of the study area is closely associated with the characteristics of the hydrological network.     

Assessment of rock slope stability by probabilistic-based Slope Stability Probability Classification method along highway cut slopes in Adilcevaz-Bitlis (Turkey)

Rock slope stability is of great concern along highway routes as stability problems on cut slopes may cause fatal events as well as loss of property. In rock slope engineering, stability evaluations are commonly performed by means of analytical or numerical analyses, principally considering the factor of safety concept. As a matter of fact, the probabilistic assessment of slope stability is progressively getting popularity due to difficulties in assigning the most appropriate values to design parameters in analytical or numerical methods. Additionally, the effect of heterogeneities in rock masses and discontinuities on the analysis results is minimized through the probabilistic concept. In this study, slope stability of high and steep sedimentary rock cut slopes along a state highway in Adilcevaz-Bitlis (Turkey) was evaluated on the basis of probabilistic approach using the Slope Stability Probability Classification (SSPC) system. The probabilistic assessment indicates major slope stability problems because of discontinuity controlled and discontinuity orientation independent mass movements. Almost all studied cut slopes suffer from orientation-independent stability problems with very low stability probabilities. Additionally, the probability of planar and toppling failures is significantly high with respect to the SSPC system. The stability problems along the investigated rock slopes were also verified by field reconnaissance. Remedial measures such as slope re-design and reinforcement at the studied locations should be taken to prevent hazardous events along the highway. On the other hand, the probabilistic approach may be a useful tool during rock slope engineering to overcome numerous uncertainties when probabilistic and analytic results are compared.     

河套华北地区旱涝的前期环流异常与大西洋海温的关系及其数值模拟

首先分析了河套华北地区旱涝的前期异常环流，然后探讨了这种异常环流形成的机制，最后采用了ＯＳＵ－ＡＧＣＭ作了大西洋地区热源异常强迫的数值试验。结果表明，大西洋地区海温异常强迫激发的定常波向上、下游的能量传播，造成的前期秋冬季环流异常与河套华北地区的夏季旱涝有较好的对应关系。     

Misconceptions about the Hubble recession law

Almost all astronomers now believe that the Hubble recession law was directly inferred from astronomical observations. It turns out that this common belief is completely false. Those models advocating the idea of an expanding universe are ill-founded on observational grounds. This means that the Hubble recession law is really a working hypothesis. One alternative to the Hubble recession law is the tired-light hypothesis originally proposed by Zwicky (Proc. Nat. Acad. Sci. 15:773, 1929). This hypothesis leads to a universe that is an eternal cosmos continually evolving without beginning or end. Such a universe exists in a dynamical state of virial equilibrium. Observational studies of the redshift-magnitude relation for Type Ia supernovae in distant galaxies might provide the best observational test for a tired-light cosmology. The present study shows that the model Hubble diagram for a tired-light cosmology gives good agreement with the supernovae data for redshifts in the range 0<z<2. This observational test of a static cosmology shows that the real universe is not necessarily undergoing expansion nor acceleration. An erratum to this article can be found at     

Seismic clusters and their characteristics at the Arabian Sea Triple Junction: Supportive evidences for plate margin deformations

The plate margin features defining the Arabian Sea Triple Junction (ASTJ) are: the Aden Ridge (AR), Sheba Ridge (SR) with their intervening Alula-Fartak Transform (AFT), Carlsberg Ridge (CR) and Owen Fracture Zone (OFZ). Exact nature of ASTJ is presently debated: whether it is RRF (ridge-ridge-fault) or RRR (ridge-ridge-ridge) type. A revised seismicity map for ASTJ is given here using data for a period little more than a century. “Point density spatial statistical criterion” is applied to short-listed 742 earthquakes (mb ≥ 4.3), 10 numbers of spatio-temporal seismic clusters are identified for ASTJ and its arms. Relocated hypocentres help better constraining the cluster identification wherever such data exist. Seismic clusters actually diagnose the most intense zones of strain accumulation due to far field as well as the local stress operating at ASTJ. An earthquake swarm emanating from a prominent seismic cluster below SR provides an opportunity to investigate the pore pressure diffusion process (due to the active source) by means of “r-t plot”. Stress and faulting pattern in the active zones are deduced from 43 CMT solutions. While normal or lateral faulting is characteristic for these arms, an anomalous thrust earthquake occurs in the triangular ‘Wheatley Deep’ deformation zone proximal to ASTJ. The latter appears to have formed due to a shift of the deformational front from OFZ towards a transform that offsets SR. Though ASTJ is still in the process of evolution, available data favour that this RRF triple junction may eventually be converted to a more stable RRR type.