境外桩基工程的施工实践

通过对支援柬埔寨、几内亚桩基工程的施工实践,总结出在境外工程项目的管理中,要制定相应的管理制度与突发事件的应急预案,在施工过程中要注意政局变化,加强卫生疾病的防治,进行必要的物质储备和规避风险等注意事项及解决方法．对地勘单位拓展海外市场提出了建设性意见,具有一定的借鉴意义。     

内蒙古桌子山煤田火区特征及灭火方法探讨

内蒙古自治区桌子山煤田赋存着较为稀缺的煤种一焦煤,煤田内存在的火区不仪烧掉了宝贵的焦性煤炭资源,给煤矿生产带来严重的事故隐患,对当地生态环境也造成极大的破坏。经查明区内有26处子火区,分布面积约760万m^2,通过煤田地质特征、煤质特征、地表指示特征、同位素氡气的浓度相对分布特征、物性特征分析了区内煤层发火原因,根据桌子山煤田火区特点,建议采用浅剥、深灌与覆盖相结合的灭火方法,并对火区进行动态监测。     

热液脉动与岩浆涌动控制机理浅论

热液脉动与岩浆涌动的控制机理,是基础地质理论所涉及的两个重要议题。本文首先对当今流行的构造控制机理提出了质疑,其后借助＂间歇喷泉＂原理和＂吹气球＂机制,分别对热浪的脉动和岩浆的涌动进行了必要的探讨。     

中国南方离子吸附型稀土矿床成矿类型及其母岩控矿因素探讨

传统认为中国南方的离子吸附型稀土矿床可划分为以“足洞式”为代表的重稀土型和以“河岭式”(或“花山式”)为代表的轻稀土型两种矿化类型。然而，近年来发现的许多矿床(如清溪、寨背和馒头山等)的赋矿风化壳中出现了轻稀土矿与重稀土矿并存现象，表现出特殊的“上轻下重”双层矿体结构。这指示了除重稀土型和轻稀土型之外，还存在着轻重稀土共生型的过渡类型。本研究通过对三种不同成矿类型的若干典型矿床系统对比，指出成矿类型的多样性与母岩性质密切相关，尤其是母岩的稀土元素地球化学和稀土载体矿物属性是制约成矿类型变化的关键因素。统计数据表明，从重稀土型→轻重稀土共生型→轻稀土型，成矿母岩的全岩稀土总量变化不大(ΣREY: 200×10-6~450×10-6→200×10-6~500×10-6→200×10-6~800×10-6)，但轻重稀土配分值出现较显著的区间性差异(ΣLREE/ΣHREY: 02~1→1~5→2~10)。与之同时，母岩中能为离子相稀土提供物源且具有重稀土配分属性的稀土副矿物类型和数量明显减少，这与全岩稀土元素地球化学特征中重稀土分量占比的降低趋势也互相匹配。该结果指示，以往认为重稀土配分母岩形成重稀土矿床、轻稀土配分母岩形成轻稀土矿床的传统观点需要外延，即一部分具有低度轻稀土配分属性(1＜ΣLREE/ΣHREY＜5)且含有丰富易风化稀土副矿物的母岩还可能形成轻重稀土共生型矿床，该认识可为今后离子吸附型稀土矿床勘查工作提供新的找矿依据。     

Flux determination over a smooth surface under strongly unstable conditions

Careful micrometeorological measurements on an empty parking lot allowed determination of the surface fluxes of sensible heatH and of momentum by applying profile equations derived from Monin-Obukhov similarity theory with two sets of the stability correction function for momentum _m and sensible heat _h . These fluxes were compared with reference values ofH independently determined by means of an eddy correlation technique. In general, better agreement was found betweenH values derived from profiles with the stability functions of Brutsaert (1992) and referenceH values, than when the Businger-Dyer functions were used to deriveH. The disagreement in the latter comparison was especially serious under strongly unstable conditions, with the value ofy=–z/L (wherez is the height andL is the Obukhov length) larger than 10. A closer look at the procedure for calculatingH from the profiles revealed that the large differences between theH values derived with these two different versions of the stability correction functions were caused by the small differences of the _h values, and not by the larger differences of the _m values. This result stems from the strong sensitivity of the resultingH values on the choice of _h .     

Structure and oscillations in quiescent filaments from observations in He i λ10830 å

Observations of two quiescent filaments show oscillatory variations in Doppler shift and central intensity of the He i 10830 Å line.The oscillatory periods range from about 5 to 15 min, with dominant periods of 5, 9, and 16 min. The 5-min period is also detected in the intensity variations, after correction for atmospheric effects. Doppler shifts precede intensity variations by about one period. The possibility that the oscillations are Alfvén waves is discussed.The Doppler signals of the filament form fibril-like structures. The fibrils are all inclined at an angle of about 25° to the long axis of the filament. The magnetic field has a similar orientation relative to the major direction of the filament, and the measured Doppler signals are apparently produced by motions along magnetic flux tubes threading the filament.The measured lifetimes of the small-scale fibrils of quiescent disk filaments are very likely a combined effect of intensity modulations and reshuffling of the structures.     

地震前水氡短临异常判别指标及预报三要素的方法探讨

本文分析了中国大陆(重点是南北地震带北段)水氧异常变化,深入研究了有震与无震异常的时空分布特征、异常总频次、起始异常时间差等,发现有震异常往往呈现“同步性”或“群体性”特征,而大部分“零散性”异常则属于非地震异常。根据上述研究,本文还提出了利用水氡异常预报地震的发震时间、地点和震级的初步方法。     

Study on the kinetics of iron oxide leaching by oxalic acid

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.