Impact of subsurface rock fragments on runoff and interrill soil loss from cultivated soils

Field and laboratory studies have indicated that rock fragments in the topsoil may have a large impact on soil properties, soil quality, hydraulic, hydrological and erosion processes. In most studies, the rock fragments investigated still remain visible at the soil surface and only properties of these visible rock fragments are used for predicting runoff and soil loss. However, there are indications that rock fragments completely incorporated in the topsoil could also significantly influence the percolation and water distribution in stony soils and therefore, also infiltration, runoff and soil loss rates. Therefore, in this study interrill laboratory experiments with simulated rainfall for 60 min were conducted to assess the influence of subsurface rock fragments incorporated in a disturbed silt loam soil at different depths below the soil surface (i.e. 0.001, 0.01, 0.05 and 0.10 m), on infiltration, surface runoff and interrill erosion processes for small and large rock fragment sizes (i.e. mean diameter 0.04 and 0.20 m, respectively). Although only small differences in infiltration rate and runoff volume are observed between the soil without rock fragments (control) and the one with subsurface rock fragments, considerable differences in total interrill soil loss are observed between the control treatment and both contrasting rock fragments sizes. This is explained by a rapid increase in soil moisture in the areas above the rock fragments and therefore a decrease in topsoil cohesion compared with the control soil profile. The observed differences in runoff volume and interrill soil loss between the control plots and those with subsurface rock fragments is largest after a cumulative rainfall (P_cum) of 11 mm and progressively decreases with increasing P_cum. The results highlight the impacts and complexity of subsurface rock fragments on the production of runoff volume and soil loss and requires their inclusion in process‐based runoff and erosion models. Copyright © 2011 John Wiley & Sons, Ltd.     

Integration of the life of field seismic data with the reservoir model at the Valhall Field‡

The frequent time‐lapse observations from the life of field seismic system across the Valhall field provide a wealth of information. The responses from the production and injection wells can be observed through time‐shift and amplitude changes. These observations can be compared to modelled synthetic seismic responses from a reservoir simulation model of the Valhall Field. The observed differences between the observations and the modelling are used to update and improve the history match of the reservoir model. The uncertainty of the resulting model is reduced and a more confident prediction of future reservoir performance is provided. A workflow is presented to convert the reservoir model to a synthetic seismic response and compare the results to the observed time‐lapse responses for any time range and area of interest. Correlation based match quality factors are calculated to quantify the visual differences. This match quality factor allows us to quantitatively compare alternative reservoir models to help identify the parameters that best match the seismic observations. Three different case studies are shown where this workflow has helped to reduce the uncertainty range associated with specific reservoir parameters. By updating various reservoir model parameters we have been able to improve the match to the observations and thereby improve the overall reservoir model predictability. The examples show positive results in a range of different reservoir modelling issues, which indicates the flexibility of this workflow and the ability to have an impact in most reservoir modelling challenges.     

Salt diapirs without well defined boundaries – a feasibility study of semi‐automatic detection

Prestack depth imaging of seismic data in complex areas such as salt structures requires extensive velocity model updating. In many cases, salt boundaries can be difficult to identify due to lack of seismic reflectivity. Traditional amplitude based segmentation methods do not properly tackle this problem, resulting in extensive manual editing. This paper presents a selection of seismic attributes that can reveal texture differences between the salt diapirs and the surrounding geology as opposed to amplitude‐sensitive attributes that are used in case of well defined boundaries. The approach consists of first extracting selected texture attributes, then using these attributes to train a classifier to estimate the probability that each pixel in the data set belongs to one of the following classes: near‐horizontal layering, highly‐dipping areas and the inside of the salt that appears more like a low amplitude area with small variations in texture. To find the border between the inside of the salt and the highly‐dipping surroundings, the posterior probability of the class salt is input to a graph‐cut algorithm that produces a smooth, continuous border. An in‐line seismic section and a timeslice from a 3D North Sea data set were employed to test the proposed approach. Comparisons between the automatically segmented salt contours and the corresponding contours as provided by an experienced interpreter showed a high degree of similarity.     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

Theory and experimental study for sliding isolators with variable curvature

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Customer concerns about uncertainty and willingness to pay in leasing solar power systems

Although solar power systems are considered as one of the most promising renewable energy sources, some uncertain factors as well as the high cost could be barriers which create customer resistance. Leasing instead of purchase, as one type of product service system, could be an option to reduce consumer concern on such issues. This study focuses on consumer concerns about uncertainty and willingness to pay for leasing solar power systems. Conjoint analysis method is used to find part worth utilities and estimate gaps of willingness to pay between attribute levels, including various leasing time lengths. The results show the part worth utilities and relative importance of four major attributes, including leasing time. Among concerns about uncertainties, government subsidy, electricity price, reliability, and rise of new generation solar power systems were found to be significantly related to the additional willingness-to-pay for a shorter leasing time. Cluster analysis is used to identify two groups standing for high and low concerns about uncertainty. People with more concerns tend to pay more for a shorter lease time.     

Virtual wave gauges based upon stereo imaging for measuring surface wave characteristics

A virtual wave gauge (VWG) technique based on stereo imaging is developed to remotely measure water wave height, period, and direction. VWG minimizes computational costs by directly tracking the elevation of the water surface at selected points of interest using a Eulerian based dynamic searching algorithm. Results show that the VWG technique developed in this paper dramatically improves efficiency by two orders of magnitude compared to the traditional Lagrangian–Eulerian based point cloud method of stereo image processing. VWG is tested against traditional wave wire gauges to within 98% accuracy for significant wave height. Furthermore, the flexibility of the VWG is demonstrated in two field applications. First in an offshore breaking wave case, an array of VWGs is used to efficiently measure wave directionality. Second to investigate the reflection coefficient of a rock-mounted structure interacting with nearshore waves, linear and spatial VWG arrays are designed and implemented based on a priori information of the wave field from a preliminary VWG measurement. Overall, we demonstrate that the flexible and computational efficient VWG technique has the potential to make real-time remote stereo imaging wave measurements a reality.