Polarization Calibration of the <Emphasis Type="Italic">Chromospheric Lyman-Alpha SpectroPolarimeter</Emphasis> for a 0.1% Polarization Sensitivity in the VUV Range. Part II: In-Flight Calibration

The Chromospheric Lyman-Alpha SpectroPolarimeter is a sounding rocket instrument designed to measure for the first time the linear polarization of the hydrogen Lyman-\({\upalpha }\) line (121.6 nm). The instrument was successfully launched on 3 September 2015 and observations were conducted at the solar disc center and close to the limb during the five-minutes flight. In this article, the disc center observations are used to provide an in-flight calibration of the instrument spurious polarization. The derived in-flight spurious polarization is consistent with the spurious polarization levels determined during the pre-flight calibration and a statistical analysis of the polarization fluctuations from solar origin is conducted to ensure a 0.014% precision on the spurious polarization. The combination of the pre-flight and the in-flight polarization calibrations provides a complete picture of the instrument response matrix, and a proper error transfer method is used to confirm the achieved polarization accuracy. As a result, the unprecedented 0.1% polarization accuracy of the instrument in the vacuum ultraviolet is ensured by the polarization calibration.     

Upstream perturbation and floodplain formation effects on chute-cutoff-dominated meandering river pattern and dynamics

A sustained dynamic inflow perturbation and bar–floodplain conversion are considered crucial to dynamic meandering. Past experiments, one-dimensional modelling and linear theory have demonstrated that the initiation and persistence of dynamic meandering require a periodic transverse motion of the inflow. However, it remains unknown whether the period of the inflow perturbation affects self-formed meander dynamics. Here, we numerically study the effect of the inflow perturbation period on the development and meander dynamics of a chute-cutoff-dominated river, which requires two-dimensional modelling with vegetation forming floodplain on bars. We extended the morphodynamic model Nays2D with growth and mortality rules of vegetation to allow for meandering. We tested the effect of a transversely migrating inflow boundary by varying the perturbation period between runs over an order of magnitude around typical modelled meander periods. Following the cutoff cascade after initial meander formation from a straight channel, all runs with sufficient vegetation show series of growing meanders terminated by chute cutoffs. This generates an intricate channel belt topography with point bar complexes truncated by chutes, oxbow lakes, and scroll-bar-related vegetation age patterns. The sinuosity, braiding index and meander period, which emerge from the inherent biomorphological feedback loops, are unrelated to the inflow perturbation period, although the spin-up to dynamic equilibrium takes a longer time and distance for weak and absent inflow perturbations. This explains why, in previous experimental studies, dynamic meandering was only accomplished with a sustained upstream perturbation in flumes that were short relative to the meander wavelength. Our modelling of self-formed meander patterns is evidence that scroll-bar-dominated and chute-cutoff-dominated meanders develop from downstream convecting instabilities. This insight extends to many more fluvial, estuarine and coastal systems in morphological models and experiments, which require sustained dynamic perturbations to form complex patterns and develop natural dynamics. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Spatial distribution and temporal trends of rainfall and erosivity in the Eastern Africa region

Soil erosion by water is one of the main environmental concerns in the drought‐prone Eastern Africa region. Understanding factors such as rainfall and erosivity is therefore of utmost importance for soil erosion risk assessment and soil and water conservation planning. In this study, we evaluated the spatial distribution and temporal trends of rainfall and erosivity for the Eastern Africa region during the period 1981–2016. The precipitation concentration index, seasonality index, and modified Fournier index have been analysed using 5 × 5‐km resolution multisource rainfall product (Climate Hazards Group InfraRed Precipitation with Stations). The mean annual rainfall of the region was 810 mm ranging from less than 300 mm in the lowland areas to over 1,200 mm in the highlands being influenced by orography of the Eastern Africa region. The precipitation concentration index and seasonality index revealed a spatial pattern of rainfall seasonality dependent on latitude, with a more pronounced seasonality as we go far from the equator. The modified Fournier index showed high spatial variability with about 55% of the region subject to high to very high rainfall erosivity. The mean annual R‐factor in the study region was calculated at 3,246 ± 1,895 MJ mm ha^?1 h^?1 yr^?1, implying a potentially high water erosion risk in the region. Moreover, both increasing and decreasing trends of annual rainfall and erosivity were observed but spatial variability of these trends was high. This study offers useful information for better soil erosion prediction as well as can support policy development to achieve sustainable regional environmental planning and management of soil and water resources.     

Subsidence associated with the LUSI mud eruption,East Java,investigated by SAR interferometry

A mud volcano LUSI initiated its eruption on 29 May 2006, adjacent to a hydrocarbon exploration well in East Java. Ground subsidence in the vicinity of the LUSI eruptive vent was well recorded by a Synthetic Aperture Radar (SAR) PALSAR onboard the Japanese ALOS satellite. We apply an Interferometric SAR (InSAR) technique on ten PALSAR data scenes, acquired between 19 May 2006 and 21 May 2007, in order to obtain continuous maps of ground displacements around LUSI. Although the displacements in the area closest to the eruptive vent (spatial extension of about 1.5 km) are not detectable because of the erupted mud, all the processed interferograms indicate subsidence in an ellipsoidal area of approximately 4 km (north–south) × 3 km (east–west), centered at the main eruptive vent. In particular, interferograms spanning the first four months until 4 Oct. 2006 and the subsequent 46 days between 4 Oct. 2006 and 19 Nov. 2006 show at least about 70 cm and 80 cm of displacements away from the satellite, respectively. Possible causes of the subsidence, i.e., 1) loading effect of the erupted mud, 2) creation of a cylindrical mud conduit, and 3) pressure decrease and depletion of materials at depth, are investigated. The effects of the first two causes are found to be insufficient to explain the total amount of subsidence observed in the first six months. The third possibility is quantitatively examined using a boundary element approach by modeling the source of deformation as a deflating oblate spheroid. The spheroid is estimated to lie at depths of a few hundred to a thousand meters. The estimated depths are significantly shallower than determined from analyses of erupted mud samples; the difference is explained by presence of significant amount of inelastic deformation including compaction and downward transfer of material.     

Surface current and vertical thermal structure on the continental slope in Tosa Bay

In order to specify a vertical thermal structure related to surface current variation on the continental slope in Tosa Bay, Japan, we analyzed monthly regular hydrographic measurements in the years 1991–2004. Subsurface temperature below 200 m on the slope was found to vary synchronously with the vertical displacement of the main thermocline around 200 m. It is shown that the vertical-averaged temperature below 200 m is significantly correlated with an along-isobath/southwestward surface current velocity on the slope. This correlation indicates that when a strong (weak) southwestward surface current is observed, temperature below 200 m decreases (increases) simultaneously, that is, isotherms below the 200 m are displaced upward (downward) together with the main thermocline. Moreover, when the strong southwestward flow is detected, across-isobath isotherms around 200 m slope upward toward the offshore direction. Furthermore, it is suggested that as the Kuroshio axis moves offshore south of the bay, the southwestward flow tends to be weakened by the combined effect of other Kuroshio parameters such as transport and stream width as well as the Kuroshio axis position. As a result, it is inferred that the correlation between the surface current and subsurface temperature can be interpreted in terms of the formation and decay of an anticlockwise circulation interacting with a cold eddy.     

Oceanic crust and Moho of the Pacific Plate in the eastern Ogasawara Plateau region

Abstract   To show the structure of oceanic crust and Moho around the eastern Ogasawara Plateau, we have analyzed industry-standard two-dimensional multichannel seismic reflection data. To obtain improved velocity models, phase information of seismic signals was used for velocity analysis and velocity models for oceanic crust above Moho were determined. We apply this velocity analysis technique to seismic reflection data around the eastern Ogasawara Plateau, with the result of clear images of structures within oceanic crust and Moho. South of the Ogasawara Plateau, Moho deepens proximal to the Plateau. Moho distal to the Plateau is ca 7 km below sea floor (bsf), whereas it is ca 10 km bsf near the Plateau. The characters of oceanic crust and Moho differ significantly north and south of the Plateau. To the north, the structure of oceanic crust is ambiguous, the sea floor is shallower and less smooth, and Moho is discontinuous. To the south, structures within oceanic crust and Moho are imaged clearly, and the sea floor is deeper. A strong Moho reflection south of the Plateau might represent a sharp boundary between layered gabbro and peridotite. However, discontinuous Moho reflections north of the Plateau might represent rough topography because of intensive magmatism or a gradual downward increase in velocity within a thick Moho transition zone. A fracture zone north of the Plateau also appears to separate oceanic crust and Moho of different characters, suggesting vigorous magmatism between the Plateau and the fracture zone, and that the Ogasawara Plateau and the fracture zone influenced the genesis of oceanic crust and upper mantle. Differences in acoustic characteristics to the north and south of the Plateau are apparent in profiles illuminated by seismic attributes.     

Integration of remotely sensed C factor into SWAT for modelling sediment yield

The C factor, representing the impact of plant and ground cover on soil loss, is one of the important factors of the Modified Universal Soil Loss Equation (MUSLE) in the Soil and Water Assessment Tool (SWAT) to model sediment yield. The daily update of C factors in SWAT was originally determined by land use types and plant growth cycles. This does not reflect the spatial variation of C values that exists within a large land use area. We present a new approach to integrate remotely sensed C factors into SWAT for highlighting the effect of detailed vegetative cover data on soil erosion and sediment yield. First, the C factor was estimated using the abundance of ground components extracted from remote sensing images. Then, the gridding data of the C factor were aggregated to hydrological response units (HRUs), instead of to land use units of SWAT. In the end, the C factor values in HRUs were integrated into SWAT to predict sediment yield by modifying the ysed subroutine. This substitution work not only increases the spatial variation of the C factor in SWAT, but also makes it possible to utilize other sources of C databases rather than those from the United States. The demonstration in the Dage basin shows that the modified SWAT produces reasonable results in water flow simulation and sediment yield prediction using remotely sensed C values. The Nash–Sutcliffe efficiency coefficient (E_NS) and R² for surface runoff range from 0·69 to 0·77 and 0·73 to 0·87, respectively. The coefficients E_NS and R² for sediment yield were generally above 0·70 and 0·60, respectively. The soil erosion risk map based on sediment yield prediction at the HRU level illustrates instructive details on spatial distribution of soil loss. Copyright © 2011 John Wiley & Sons, Ltd.     

Variability patterns of Rossby wave source

Rossby waves (RW) propagation due to a local forcing is one of the mechanisms responsible for wave trains configurations known as teleconnections. The term teleconnection refers to anomalies patterns that are correlated in several regions of the world, causing large-scale changes in atmospheric waves patterns and temperature and precipitation regimes. The aim of teleconnections studies is to provide a better understanding of atmospheric variability and their mechanisms of action in order to identify patterns that can be tracked and predicted. The purpose of this study was to characterize seasonal and spatial variability of atmospheric RW sources. The RW source at 200?hPa was calculated for the four seasons with reanalysis data of zonal and meridional wind. In the Northern Hemisphere (NH), the RW sources were located on East Asia, North America, North Atlantic and Pacific. The main RW sources in the Southern Hemisphere (SH) were located over Intertropical, South Pacific, South Atlantic and South Indian Convergence Zones. Extratropical regions were also identified, mainly to the south of Australia. The vortex stretching term (S1) and the advection of absolute vorticity by the divergent wind (S2) were analyzed to discuss the physical mechanisms for RW generation. In the NH, the source at East Asia in DJF changed to a sink in JJA, related to the dominance of S1 term in DJF and S2 term in JJA. In the SH, the vortex stretching term had the dominant contribution for RW source located to the south of Australia. The main forcing for RW sources at east of Australia was the advection of absolute vorticity by divergent flow. Over South America, both terms contributed to the source in DJF. The main modes of RW source variability were discussed by using empirical orthogonal functions analysis. RW variability was characterized by wave trains configurations in both hemispheres over regions of jet streams and storm tracks, associated with favorable and unfavorable areas for RW generation.