Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.     

The Ganges and Brahmaputra rivers in Bangladesh: basin denudation and sedimentation

Every year the Ganges and Brahmaputra rivers in Bangladesh transport 316 and 721 million tonnes of sediment, respectively. These high loads of suspended sediment reflect the very high rate of denudation in their drainage basins. The average mechanical denudation rate for the Ganges and Brahmaputra basins together is 365 mm 10³ yr⁻¹. However, the rate is higher in the Brahmaputra Basin than that in the Ganges Basin. Several factors, including mean trunk channel gradient, relief ratio, runoff, basin lithology and recurring earthquakes are responsible for these high denudation rates. Of the total suspended sediment load (i.e. 1037 million tonnes) transported by these rivers, only 525 million tonnes (c. 51% of the total load) are delivered to the coastal area of Bangladesh and the remaining 512 million tonnes are deposited within the lower basin, offsetting the subsidence. Of the deposited load, about 289 million tonnes (about 28% of the total load) are deposited on the floodplains of these rivers. The remaining 223 million tonnes (about 21% of the total load) are deposited within the river channels, resulting in aggradation of the channel bed at an average rate of about 3·9 cm yr⁻¹. Although the Brahmaputra transports a higher sediment load than the Ganges, the channel bed aggradation rate is much higher for the Ganges. This study also documents a wide range of interannual, seasonal and daily variation in suspended sediment transport and water discharge. Interannual variation in sediment deposition within the basin is also suggested. Copyright © 1999 John Wiley & Sons, Ltd.     

Deep water observations of extreme waves with moored and free GPS buoys

Point-positioning GPS-based wave measurements were conducted by deep ocean (over 5,000 m) surface buoys moored in the North West Pacific Ocean in 2009, 2012, and 2013. The observed surface elevation bears statistical characteristics of Gaussian, spectrally narrow ocean waves. The tail of the averaged spectrum follows the frequency to the power of ?4 slope, and the significant wave height and period satisfies the Toba’s 3/2 law. The observations compare well with a numerical wave hindcast. Two large freak waves exceeding 13 m in height were observed in October 2009 and three extreme waves around 20 m in height were observed in October 2012 and in January 2013. These extreme events are associated with passages of a typhoon and a mid-latitude cyclone. Horizontal movement of the buoy revealed that the orbital motion of the waves at the peak of the wave group mostly exceed the weakly nonlinear estimate. For some cases, the orbital velocity exceeded the group velocity, which might indicate a breaking event but is not conclusive yet.     

Open and coastal seas interactions south of Japan represented by an ensemble Kalman filter

We investigated the feasibility of the ensemble Kalman filter (EnKF) to reproduce oceanic conditions south of Japan. We have adopted the local ensemble transformation Kalman filter algorithm based on 20 members’ ensemble simulations of the parallelized Princeton Ocean Model (the Stony Brook Parallel Ocean Model) with horizontal resolution of 1/36°. By assimilating satellite sea surface height anomaly, satellite sea surface temperature, and in situ temperature and salinity profiles, we reproduced the Kuroshio variation south of Japan for the period from 8 to 28 February 2010. EnKF successfully reproduced the Kuroshio path positions and the water mass property of the Kuroshio waters as observed. It also detected the variation of the steep thermohaline front in the Kii Channel due to the intrusion of the Kuroshio water based on the observation, suggesting efficiency of EnKF for detection of open and coastal seas interactions with highly complicated spatiotemporal variability.     

Numerical study of surface water circulation around Sekisei Lagoon, southwest Japan

This paper discusses the variability of surface currents around Sekisei Lagoon using a nested grid ocean circulation model. We developed a triple-nested grid system that consists of a coarse-resolution (1/60° or ∼1.85 km) model off Taiwan, an intermediate-resolution (1/300° or ∼370 m) model around the Yaeyama Islands, and a fine-resolution (1/900° or ∼123 m) model of Sekisei Lagoon. The nested grid system was forced by wind and heat flux calculated from six-hourly atmospheric reanalysis data and integrated over the period from May to July 2003. The coarse-resolution model was driven by lateral boundary conditions calculated from daily ocean reanalysis data to include realistic variation of the Kuroshio and mesoscale eddies with spatial scales of ∼500–700 km in the open ocean. The tidal forcing was included in the intermediate-resolution model by interpolating sea level data obtained from a data-assimilative tidal model. The results were then used to drive the fine-resolution model to simulate the surface water circulation around Sekisei lagoon. Model results show that (1) currents inside the lagoon are mainly driven by tide and wind; (2) there exists a strong southwestward current along the bottom slope in the southeast portion of the lagoon; the current is mainly driven by remote mesoscale eddies and at times intensified by the local wind; (3) the flow relaxation scheme is effective in reducing biases along the open boundaries. The simulated currents were used to examine the retention and dispersion of passive particles in the surface layer. Results show that the surface dispersion in the strong open ocean current region is significantly higher than that inside the lagoon.     

Toward seamless indoor-outdoor applications: Developing stakeholder-oriented location-based services

Location-Based Services (LBS), an emerging new business based on smartphone and mobile networks, are becoming more and more popular. Most of these LBSs, however, only offer non-seamless indoor/outdoor applications and simple applications without giving stakeholders the chance to play an active role. Our specific aim is to solve these issues. This paper presents concepts to solve these issues by expanding the Open Location Services Interface Standard (OpenLS) to allow seamless indoor/outdoor positioning and to extend the content of the services to include information recommended by stakeholders.     

Toward seamless indoor-outdoor applications: Developing stakeholder-oriented location-based services

Location-Based Services (LBS),an emerging new business based on smartphone and mobile networks,are becoming more and more popular.Most of these LBSs,however,only offer non-seamless indoor/outdoor applications and simple applications without giving stakeholders the chance to play an active role.Our specific aim is to solve these issues.This paper presents concepts to solve these issues by expanding the Open Location Services Interface Standard (OpenLS) to allow seamless indoor/outdoor positioning and to extend the content of the services to include information recommended by stakeholders.     

On the gravity wave-driven instability of E layer at mid-latitude

The plasma instability process during internal gravity wave propagation through the ionospheric E region is considered. The growth rate of the instability has been found and it has been shown that it depends on perturbation wavelength, gravity wave parameters and direction of propagation. The conditions for the instability are favorable when the vorticity of the associated neutral motion becomes antiparallel to the geomagnetic field. In the proposed instability mechanism plasma irregularities could seed the large-scale sporadic E layer structuring because they are generated in situ as a part of the same neutral wind structure that serves to initiate the formation of the layer.