Radiolarian Age of Red Chert from the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. The radiolarian age of red chert from the Kunimiyama area of the Northern Chichibu Belt was determined in order to constrain the depositional age of the Kunimiyama deposit that is among the largest ferromanganese deposits in Japan. Pseudoalbaillella cf scalprata Holdsworth and Jones, Pseudoalbaillella cf longicornis Ishiga and Imoto and Pseudoalbaillella sp. belonging to the Ps. lomentaria Zone are found in the red chert, indicating an age of middle Early Permian (middle Wolfcampian). The red chert occurs immediately above the ferromanganese deposit, and the boundary between them is gradual. Based on their mode of occurrence and geochemical features, it is most likely that radiolarian chert and ferromanganese precipitate accumulated simultaneously to produce red chert during the waning stage of submarine hydrothermal activity that was responsible for the Kunimiyama deposit. Consequently, the age of Kunimiyama stratiform ferromanganese deposit is constrained as middle Early Permian (middle Wolfcampian).     

Radiolarian Age of Manganese Ore and Red Chert from the Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. We obtain radiolarian fossils such as Follicucullus monacanthus, Pseudoalbaillella aff. globosa, Pseudoalbaillella cf fusiformis , and Pseudoalbaillella spp. belonging to the Pseudoalbaillella globosa and Follicucullus monacanthus Zones from manganese ore and associated red chert of the Ananai stratiform manganese deposit in the Northern Chichibu Belt, central Shikoku. The depositional age of the Ananai ore deposit is constrained as Guadalupian (Middle Permian) that is between 270.6 and 260.4 Ma in the updated geologic time scale.     

Using VLBI fringe-phase information from geodetic experiments for short-period ionospheric studies

The usage of Very Long Baseline Interferometry (VLBI) fringe-phase information in geodetic VLBI is a new field of research, which can be used for the detection of short-period (i.e., several minutes) variations (scintillations) of the ionosphere. This paper presents a method for the extraction of such disturbances and discusses how dispersive influences can be separated from intra-scan delay variations. A proper functional and stochastic model for the separation of the different effects is presented and the algorithms are applied to real measurements. In an example, it is shown that a traveling ionospheric disturbance in Antarctica can be detected very precisely. A possible physical origin and the propagation properties of the disturbance are presented and the results are compared with GPS measurements. The benefit of this method for other applications is also discussed.     

Crystal structures of Ni2SiO4 and Fe2SiO4 as a function of temperature and heating duration

X-ray structure refinements of Ni₂SiO₄ and Fe₂SiO₄ spinels have been made as a function of temperature and heating duration by intensity measurements at high temperatures and room pressure. The lattice parameters of Ni₂SiO₄ spinel linearly increased with temperature up to 1,000° C. However, Fe₂SiO₄ spinel exhibited a nonlinear thermal expansion and was converted to a polycrystalline mixture of spinel and olivine by heating of less than one-hour at 800° C. The ratios between the octahedral and tetrahedral bond lengths D _oct/D _tetr and between the shared and unshared edge distances (O-O)_sh/(O-O)_unsh in Fe₂SiO₄ spinel were both much larger than those in Ni₂SiO₄. These ratios increase with temperature. The Fe₂SiO₄ spinel more readily approached a activation state which facilitated the transition to the olivine structure than the Ni₂SiO₄ spinel. The lattice parameter of Ni₂SiO₄ spinel decreased with heating period at constant temperatures of 700° C and 800° C. The parameter of the quenched sample after heating for 52 h at 700° C was smaller than that of the nonheated sample. The refinements of the site occupancies at each heating duration indicated an increase in the cation deficiency in both tetrahedral and octahedral sites. Electron microprobe analysis, however, proved no significant difference in the chemical compositions between the quenched and nonheated samples. Si and Ni atoms displaced from normally occupied spinel lattice sites are assumed to settle in vacant sites defined by the cubic close packed oxygen sublattice in a manner which preserves the electric neutrality of the bulk crystal.     

Origin of sulfur species in acid sulfate-chloride thermal waters,northeastern Japan

Acid sulfate-chloride thermal water samples collected together with fumarolic gases from various volcanic areas in northeastern Japan were studied chemically and isotogdically. δ³⁴S (COT) values of sulfate and hydrogen sulfide from these volcanic hot springs range from +4.0 to +31 and from ?15.0 to ?2.0% respectively, with δ³⁴S_ys value of +2.5 to +31. The δ³⁴S of the sulfate in the more saline waters tends to become smaller with increasing ratio of SO₄ to Cl, although the chemical and isotopic composition of acid thermal water within some areas may be altered by secondary processes during the discharge of the thermal waters. This trend can be explained by the reaction of the volcanic gases, having S/Cl of 4 ~ 7 and total sulfur of ~0% in δ³⁴S, with ground water at 200°C, and/or the removal of sulfide phase depleted in ³⁴S from the acid thermal water formed by the disproportionation of volcanic sulfur. The sulfur species in acid sulfate-chloride thermal water are shown to be volcanic exhalations.     

Structure and lattice vibrations of Mg-Al spinel solid solution

X-ray structure refinements have been made for nonstoichiometric (MgO · 3Al₂O₃) and stoichiometric Mg-Al spinels. Several structure variations with chemical composition have been observed and are discussed in relation to Al substitution in tetrahedral sites. Infrared reflection and Raman spectra of the single crystal of the nonstoichiometric spinel (MgO · 3Al₂O₃) have been measured and analyzed. The results obtained are compared with those reported for the stoichiometric sample. From the infrared and Raman frequencies reported for the stoichiometric Mg-Al spinel, which are partly complemented with our results, the effective ionic charges of the ions in MgAl₂O₄ have been estimated on the basis of the rigid ion model.     

Railway embankment failure due to ballast layer breach caused by inundation flows

A railway embankment constructed on a floodplain is at risk of damage due to flooding flows. The process and critical conditions that lead to railway embankment damage during flooding are not clearly understood, rendering risk estimations impossible and hindering the development of flood-resilient rail systems. For this work, we first reviewed records of railway damage in flood plains and flows through the ballast layer. The breaching process was selected as the focus of our study. We secondly specified the fundamental characteristics of flows through a ballast layer. The critical flow rate per unit width and the minimum upstream water depth required for initiating extensive ballast breaching were experimentally evaluated using a full-scale ballast layer with rails and sleepers constructed using materials originally utilized in actual railways. A two-dimensional flow model was then employed for estimating the flow through a ballast layer that was placed on an impermeable base embankment. A simple ballast breaching model was also employed in order to explore a higher flow rate condition that could not be represented in our experiment due to limited facilities. The breaching pattern represented by the simulation model corresponded to the breaching pattern observed in the experiment. In addition to the above, here, we also discuss the ballast breaching process based on qualitative field records and quantitative experimental results, as well as the ballast breaching process as represented by the simulation.     

Depositional Age of a Fossil Whale Bone from São Paulo Ridge,South Atlantic Ocean,Based on Os Isotope Stratigraphy of a Ferromanganese Crust

Whale carcasses (whale falls) deposited on the deep seafloor are associated with a distinctive biotic community. A fossil whale bone recovered from São Paulo Ridge, South Atlantic Ocean, during cruise YK13–04 Leg 1 of R/V Yokosuka was covered by a ferromanganese (Fe–Mn) crust approximately 9 mm thick. Here, we report an age constraint for this fossil bone on the basis of Os isotopic stratigraphy (¹⁸⁷Os/¹⁸⁸Os ratio) of the Fe–Mn crust. Major‐ and trace‐element compositions of the crust are similar to those of Fe–Mn crusts of predominantly hydrogenous origin. Rare earth element concentrations in samples of the crust, normalized with respect to Post‐Archean average Australian Shale, exhibit flat patterns with positive Ce and negative Y anomalies. These results indicate that the Fe–Mn crust consists predominantly of hydrogenous components and that it preserves the Os isotope composition of seawater at the time of its deposition. ¹⁸⁷Os/¹⁸⁸Os ratios of three Fe–Mn crust samples increased from 0.904 to 1.068 in ascending stratigraphic order. The value of 1.068 from the surface slice (0–3 mm depth in the crust) was identical to that of present‐day seawater within error (~1.06). The value of 0.904 from the basal slice (6–9 mm) equaled seawater values from ca. 4–5 Ma. Because it is unknown how long the bone lay on the seafloor before the Fe–Mn crust was deposited, the Os stratigraphic age of ca. 5 Ma is a minimum age of the fossil. This is the first application, to our knowledge, of marine Os isotope stratigraphy for determining the age of a fossil whale bone. Such data may offer valuable insights into the evolution of the whale‐fall biotic community.