Gneiss-Water Interaction and Water Evolution During the Early Stages of Dissolution Experiments at Room Temperature

Gneiss-distilled water interaction at room temperature was investigated with batch-reactors to study water-rock reaction and geochemical evolution of the aqueous phase with time. The ion concentrations in water were controlled not only by the dissolution of primary minerals, but also by the precipitation of secondary minerals. The decreasing fraction sizes of gneiss could favor dissolution and precipitation simultaneously. Ca^2 and K^ were the major cations, and HCO3^- was the major anion in water. All the ions except Ca^2 increased in concentration with time. The Ca^2 release from the rock to the aqueous phase was initially much faster than the release of K^ , Na^2 and Mg^2 . But after about 5 - 24 hours, the Ca^2 concentrations in water decreased very slowly with time and became relatively stable. During the experiment, the water varied from the Ca-( K)-HCO3-type water to the K-Ca-HCO3-type water, and then to the K-(Ca, Na)-HCO3-type water. The water-gneiss interaction was dominated by the dissolution of Kfeldspar in the solution. The remaining secondary minerals were mainly kaolinite, illite and K (Mg) -mica.     

福建上杭铜矿沟—萝卜岭斑岩型铜矿床地质特征及远景评价

上杭县铜矿沟和萝卜岭矿段组成一个斑岩型铜矿床．萝卜岭矿段位于花岗闪长斑岩北东端的前峰部位，铜矿沟则是其往南西深部的延伸，通过对铜矿沟—箩卜岭斑岩型铜矿床地质特征的研究，认为铜矿沟斑岩型铜矿埋藏总体较浅、品位较低、厚度稳定且较厚，对于指导该区寻找浅部斑岩型铜矿具有重要的意义。     

科技期刊编辑应具备的基本素质

对科技期刊质量和编辑素质的关系进行了研究，认为编辑是期刊的设计师。一本期刊从总体创意、策划选题、编审稿件到排版设计，无不体现编辑的主体意识。期刊质量的好坏，读者评价的高低都与编辑息息相关。编辑的素质关系到期刊的生存和发展。得出不断提高科技期刊编辑的素质是十分必要的结论。     

上海及邻区的地壳形变速率与地震活动

对上海佘山地震台伸缩仪的数字记录资料进行去趋势以及地壳形变速率的分析表明：伸缩仪EW向在200l年5～7月存在破年变趋势异常，并且该测项的形变速率在2001年3～8月存在高于正常背景值的异常。结合GPS资料、应力场、地震活动性的情况分析后认为，佘山台的形变速率异常可反映上海及邻区应力场的部分信息，该信息对地震活动具有一定前兆意义。因此，应用形变数字化资料计算地壳形变速率，可作为对地层活动以及日常地震预测的一种分析方法。     

睡莲类植物ITS nrDNA序列的分子系统发育分析

睡莲类植物是目前植物分子系统学与进化研究的一个重要类群。核基因组的ITS区是核核糖体（nrDNA)转录单位的一部分。测定和分析了5个属的7种睡莲类植物的核核糖体ITS序列，并与GenBank中提取的相关序列进行了组合分析，初步获得了睡莲类植物的2个ITS系统树，结果也支持现有分子系统学研究中有关金鱼藻处于较原始位置的观点。     

Extracting flow structures from tracer data

A method of visualizing structures in closed chaotic flows out of homogenous particle distributions is presented in the example of models of a meandering jet. To this end, the system will be leaked or opened up by defining a region of the flow, so that a particle is considered to be escaped if it leaves this region. By applying this method to an ensemble of nonescaped tracers, we are able to characterize mixing processes by visualizing the converging and stretching filamentations (stable and unstable manifolds) in the flow without using additional mathematical tools. The possibility of applying the algorithm to analyze buoy data, and a comparison with the finite time manifolds are discussed.     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

A numerical method of viscoelastic finite element coupled with spring-block model to simulate the interaction of faults and crustal blocks

A numerical method of viscoelastic finite element coupled with spring-block model is developed to study temporal processes from the slow tectonic motion of large-scale crust to the rapid failure of small-scale faults. Our modeling demonstrates that the motion of crustal blocks is driven by forces from tectonic plate boundaries, and the deformation is distributed on faults for the stress accumulating. The coupling model generates earthquake sequences that display a magnitude-frequency scaling consistent with Gutenberg-Richter law. The frictional heterogeneities affeci earthquakes occurrence and stresses distribution of crustal blocks. Rupture of earthquakes starts at the nucleation node, and propagates bilaterally along faults with the stress triggering, release and redistribution. The failure of faults releases part of crustal stresses, the stress state of crustal blocks near fault is affected by the rupture of local segments on the fault, and the stress state of crustal blocks far away from the fault is controlled by the seismic activity of the whole fault.     

Numerical simulations of deformation and movement of blocks within North China in response to 1976 Tangshan earthquake

Using methods of discontinuous deformation analysis and finite element (DDA+FEM), this paper simulates dynamic processes of the Tangshan earthquake of 1976, which occurred in the northern North China where its internal blocks apparently interacted. Studies focus upon both the movement and deformation of the blocks, in particular, the Ordos block, and variations of stress states on the boundary faults. The Tangshan earthquake was composed of three events: slipping motions of NNE-striking major fault, NE-striking fault near the northeastern end of the NNE-striking fault, and NW-striking fault on the southeastern side of the NNE-striking fault. Compared with previous studies, our model yields a result that is more agreeable with the configuration of aftershock distributions. A number of data are presented, such as the principle stress field during the earthquake, contours of the maximum shear stress, the strike-slip deformation between blocks near the earthquake focus, time-dependent variations of slips of earthquake-triggered faulting, the maximum slip distance, and stress drops. These results are in accord with the earthquake source mechanism, basic parameters from earthquake wave study, macro-isoseismic line, observed horizontal displacement vectors, etc. The Tangshan earthquake exerted different influences on the adjacent blocks and boundary faults between them, thus resulting in differential movement and deformation. The Ordos block seems to have experienced the small-scale counterclockwise rotation and deformation, but its northeast part, bounded on the east by the Taihangshan and on the north by the Yanshan and Yinshan belts, underwent relatively stronger deformation. The Tangshan earthquake also changed the stress state of boundary faults of the North China, leading to an increase in shear stress and a decrease in normal stress in the NW-trending Zhangjiakou-Penglai fault through Tangshan City and the northern border faults of the Ordos block, and therefore raises the potential risk of earthquake occurrence. This result is supported by the facts that a series of Ms ≥ 6 earthquakes took place at the northern margin of the Ordos block after the Tangshan earthquake.