Effect of the water/cement ratio on concrete behavior under extreme loading

This study focuses on identifying concrete behavior under severe triaxial loadings (near field detonation or ballistic impacts). In order to reproduce high stress levels with well‐controlled loading paths, static tests have been carried out on concrete samples by mean of a very high‐capacity triaxial press (stress levels on the order of 1 GPa). It is a longstanding fact that the water/cement ratio (W/C), upon entering the concrete composition, is a major parameter affecting the porosity and strength of the cement matrix of hardened concrete. The objective of this article is to quantify the effect of this ratio on concrete behavior under conditions of high confinement. From the composition of a reference ‘ordinary’ concrete (i.e. W/C=0.6), two other concretes have been produced with W/C ratios equal to 0.4 and 0.8, respectively. This article presents experimental results and their analysis regarding the effect of water/cement ratio (W/C) on concrete behavior under high confinement. It shows that when placed under high confinement, concrete behaves like a granular stacking composed of concrete without any influence from the level of cement matrix strength. Copyright © 2009 John Wiley & Sons, Ltd.     

Extension syn-convergence,poinçonnement vertical et unités métamorphiques contrastées en bordure ouest du Grand Paradis (Alpes Franco-Italiennes)

Résumé

À la bordure occidentale du massif du Grand Paradis (Alpes occidentales), la zone Piémontaise est constituée des unités océaniques des schistes lustrés et de l’unité continentale du Grand Paradis. Une étude métamorphique nous permet de préciser et de discuter des discontinuités de pression et des conditions de rétro-morphose de trois unités piémontaises déjà distinguées antérieurement. L’unité supérieure des schistes lustrés (LS) métamorphisée dans le faciès des schistes bleus (9.5 ± 2 kbar, 340 ± 30 °C). L’unité inférieure des schistes lustrés (LI) métamorphisée dans le faciès des éclogites (12.5±3 kbar, 480±50 °C). L’unité continentale du Grand Paradis (GP) métamorphisée dans le faciès des éclogites de plus haute pression (12 à 20 kbar, 500 ± 50 °C). L’ensemble des unités enregistre une décompression dans les conditions du faciès amphibolite à épidote, et donc avec une légère augmentation tardive de température, pour les unités LI et GP, et dans celles des schistes verts pour l’unité LS. L’étude des inclusions fluides dans les fentes de tension et dans les plans de cisaillement, en parallèle à l’élude des paragenèses rétromorphiques permet de montrer que c’est tardivement (4 ± 1 kbar, 400 ± 50 °C) que l’histoire tectonomélamor-phique devient commune à l’ensemble des unités. L’étude du champ de la déformation finie met en évidence une tectonique en extension qui débute en conditions ductiles dans le faciès amphibolite à épidote pour LI, et schiste vert pour LS, et se poursuit en conditions fragiles. La déformation ductile se traduit par des trajectoires en dômes et bassins de la foliation, avec une partition entre des domaines en aplatissement au c?ur des dômes et des domaines en cisaillement simple en bordure des dômes, au contact entre les différentes unités. La déformation fragile correspond au continuum plus tardif de la déformation extensive ductile. Cette tectonique extensive n’est qu’en partie responsable des sautes de pression entre les trois unités étudiés. Elle correspond à l’accommodation, en surface, au poinçonnement vertical des unités de haute pression, en contexte de convergence, par l’écaillage progressif de la croûte européenne à l’avant du butoir mantellique apulien. © 2000 Editions scientifiques et médicales Elsevier SAS     

Linking the NE Anatolian and Lesser Caucasus ophiolites: evidence for large-scale obduction of oceanic crust and implications for the formation of the Lesser Caucasus-Pontides Arc

In the Lesser Caucasus and NE Anatolia, three domains are distinguished from south to north: (1) Gondwanian-derived continental terranes represented by the South Armenian Block (SAB) and the Tauride–Anatolide Platform (TAP), (2) scattered outcrops of Mesozoic ophiolites, obducted during the Upper Cretaceous times, marking the northern Neotethys suture, and (3) the Eurasian plate, represented by the Eastern Pontides and the Somkheto-Karabagh Arc. At several locations along the northern Neotethyan suture, slivers of preserved unmetamorphozed relics of now-disappeared Northern Neotethys oceanic domain (ophiolite bodies) are obducted over the northern edge of the passive SAB and TAP margins to the south. There is evidence for thrusting of the suture zone ophiolites towards the north; however, we ascribe this to retro-thrusting and accretion onto the active Eurasian margin during the latter stages of obduction. Geodynamic reconstructions of the Lesser Caucasus feature two north dipping subduction zones: (1) one under the Eurasian margin and (2) farther south, an intra-oceanic subduction leading to ophiolite emplacement above the northern margin of SAB. We extend our model for the Lesser Caucasus to NE Anatolia by proposing that the ophiolites of these zones originate from the same oceanic domain, emplaced during a common obduction event. This would correspond to the obduction of non-metamorphic oceanic domain along a lateral distance of more than 500?km and overthrust up to 80?km of passive continental margin. We infer that the missing volcanic arc, formed above the intra-oceanic subduction, was dragged under the obducting ophiolite through scaling by faulting and tectonic erosion. In this scenario part of the blueschists of Stepanavan, the garnet amphibolites of Amasia and the metamorphic arc complex of Erzincan correspond to this missing volcanic arc. Distal outcrops of this exceptional object were preserved from latter collision, concentrated along the suture zones.     

Parallel polygon line shading: the quest for more computational power from an existing GIS algorithm

Abstract

Utilising the powerful resources of a parallel computer has become a technique available to the GIS software engineer for increasing the performance of such complex software systems. This paper discusses the effectiveness of both automatic and manual parallelising techniques with a view to making an assessment as to whether the inherent sequential structure of GIS software is a detrimental factor inhibiting the use of such techniques. With the aid of the Scan Line Fill (SLF) algorithm in GIMMS, it has been shown that whilst automated parallelization has no merits in this case, a significant performance benefit can be achieved with algorithm redesign at the macro level to exploit the natural geometric parallelism inherent within the algorithm. However, the results illustrate that the full potential of this approach will not be appreciated until the I/O bottleneck is completely overcome, as opposed to merely avoided.     

晋冀豫交界地区地壳三维速度结构与地震分布特征

利用区域双差层析成像方法,基于2008年10月—2018年6月近震资料,对晋冀豫交界地区记录到的地震事件进行震源位置与P波、S波三维速度结构的联合反演。重新定位后,地震空间位置得到明显改善,浅部的速度结构与地形及沉积层厚度对应较好,研究区内控制性断裂和地震多分布在太行山隆起区的高、低速变化梯级带上。对比分析研究区内不同构造单元及同一构造单元不同深度的P、S波速度异常特征及其与中小地震和历史强震的分布关系,结合研究区内历史强震和现今中、小震分析发震构造及深部孕震环境,为该区未来强震危险区判定提供科学依据。     

Steady-state vertical distribution of cohesive sediments in a flow

Settling velocity of diluted suspended aggregates is examined under steady-state conditions. It is shown that if the local settling velocity of the suspended mass of sediments at the bottom is gamma distributed, then, the vertical variation of the local mean settling velocity $\overline{W}$ is proportional to a power $1/r$ of the local concentration C, where r is the gamma distribution parameter. That is a consequence of the suspended-sediment sorting produced by the vertical dynamics. The parameter r characterizes the range of settling velocity values for all the aggregates simultaneously in suspension. To cite this article: M. Sánchez et al., C. R. Geoscience 337 (2005).     

A composition-independent quantitative determination of the water content in silicate glasses and silicate melt inclusions by confocal Raman spectroscopy

A new approach was developed to measure the water content of silicate glasses using Raman spectroscopy, which is independent of the glass matrix composition and structure. Contrary to previous studies, the compositional range of our studied silicate glasses was not restricted to rhyolites, but included andesitic, basaltic and phonolitic glasses. We used 21 glasses with known water contents for calibration. To reduce the uncertainties caused by the baseline removal and correct for the influence of the glass composition on the spectra, we developed the following strategy: (1) application of a frequency-dependent intensity correction of the Raman spectra; (2) normalization of the water peak using the broad T–O and T–O–T vibration band at 850–1250 cm⁻¹ wavenumbers (instead of the low wavenumber T–O–T broad band, which appeared to be highly sensitive to the FeO content and the degree of polymerization of the melt); (3) normalization of the integrated Si-O band area by the total number of tetrahedral cations and the position of the band maximum. The calibration line shows a ±0.4 wt% uncertainty at one relative standard deviation in the range of 0.8–9.5 wt% water and a wide range of natural melt compositions. This method provides a simple, quick, broadly available and cost-effective way for a quantitative determination of the water content of silicate glasses. Application to silicate melt inclusions yielded data in good agreement with SIMS data.