房产测绘平面图系统的实现研究

随着城市规划管理的不断发展．使得城市房产测绘单位采用大型空间数据库管理测绘平面图资料成为必然。通过建立房产测绘平面图系统，可以有效地解决数据标准不一致．图数不能互访，测绘各部门无法协调一致等问题，充分发挥网络功能，提升整个城市的房产管理水平．达到房产管理和房产服务一体化的目标。本文详细论述了房产测绘平面图系统的概念、设计原则和系统功能．在南京数字房产共享平台的建设中得到了实现．并取得了良好的效果。     

GIS在统计行业中的应用

地理信息系统技术在很多各业获得了成功的应用,但在统计行业中的应用却相对滞后.本文综述了地理信息系统在统计行业中的应用现状、优势及存在的问题,并对统计地理信息系统的解决方案作了简要分析,给出了建立统计GIS的技术方案和统计GIS的总体框架.     

滨里海盆地东缘阿克纠宾地区遥感地质及地球物理场研究

 以图像处理、GIS为平台，对哈萨克斯坦阿克纠宾地区的重、磁、电、遥感及地震资料进行了综合分析。指出，该地区重、磁力资料信息含量较高，对于确定盐下构造分布具有积极意义。使用遥感资料对小断层及裂隙发育状况进行研究，有助于裂隙孔隙型碳酸盐岩油藏开发注水效率的提高。同时可对扎纳若尔、阿里别克莫拉等油田的井网状况进行监控和地面设施进行调查。     

人造热带气旋垂直结构问题初探

在人造热带气旋中引入了倾斜垂直结构，并将其用于西折后9806号热带气旋登陆路径的数值模拟。结果表明：应用该方案所得到的模拟结果优于应用正压结构的人造热带气旋方案的模拟结果要准确。因此，此类热带气旋的预报中，其初始涡旋可采用倾斜垂直结构，从而提出改进热带气旋初始涡旋的一种新思路。若对其作进一步研究、推广，则具有广阔的业务应用前景。     

雨量器(计)安装不水平造成的测量误差分析及对策

降水量是气象台站重要观测项目之一。目前，大部分基层台站用于降水量观测的仪器主要靠雨量器、翻斗式遥测雨量计和虹吸式雨量计３种。《地面气象观测规范》规定：雨量器在安装和使用过程中都必须水平，以保证所测降水数据的准确性。但在实际工作中，由于各种原因往往会使器口倾斜。尤其是雨量器结构粗糙且每次观测都要取下承水器，稍不注意就会发生倾斜。那么雨量仪器安装不水平对测量水有何影响呢？大部分观测员都认为会比实际雨量偏小，其实不尽然。本文试图通过对不同降水情况下的误差进行分析，同时提供一些消除误差的方法供参考。为了…     

用逐步回归预测棉铃虫发生期和发生量

收集了1973年至2000年的气象，农作物、棉铃虫虫害等196年因子，以运城、汾阳和临汾为山西省代表站，利用最优二分割法把发生量分为10级，5级和不分级3种情况；使用逐步回归计算了219个模型，从中选出27个棉铃虫二、三代发生期，发生量最优模型，在农气服务中应用，预报准确率为95％，效果良好。     

反扩散格式在二维锋生数值模拟中的应用

把无粘流中能成功捕捉接触间断的反扩散差分格式，用在了准地转二维理想锋生的数值模拟中，并将计算结果与Cullen的计算结果和半地转方程的精确解进行了比较。用反扩散格式模拟的锋面较Cullen的结果更加显，而且更接近半地转方程的精确解。     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.