System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of elastic structures during earthquakes

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of inelastic structures during earthquakes

A new inelastic structural control algorithm is proposed by incorporating the force analogy method (FAM) with the predictive instantaneous optimal control (PIOC) algorithm. While PIOC is very effective in compensating for the time delay for elastic structures, the FAM is highly efficient in performing the inelastic analysis. Unlike conventional inelastic analysis methods of changing stiffness, the FAM analyzes structures by varying the structural displacement field, and therefore the state transition matrix needs to be computed only once. This greatly simplifies the computation and makes inelastic analysis readily applicable to the PIOC algorithm. The proposed algorithm compensates for the time delay that happens in practical control systems by predicting the inelastic structural response over a period that equals the magnitude of the time delay. A one‐story frame with both strain‐hardening and strain‐softening inelastic characteristics is analyzed using this algorithm. Results show that the proposed control algorithm is feasibile for any inelastic structures. While the control efficiency deteriorates with the increase in magnitude of the time delay, the PIOC maintains acceptable performance within a wide range of time delay magnitudes. Finally, a computer model of a six‐story moment‐resisting steel frame is analyzed to show that PIOC has good control results for real inelastic structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Petrogenesis of the Ulsan carbonate rocks from the south-eastern Kyongsang Basin, South Korea

Abstract The petrogenesis of the Ulsan carbonate rocks in the Mesozoic Kyongsang Basin of South Korea, which have previously been interpreted as limestone of Paleozoic age, is reconsidered in the present study. Within the Kyongsang Basin, a small volume of carbonate rocks, containing a magnetite deposit and spatially associated ultramafic rocks, is surrounded by sedimentary, volcanic and granitic rocks of the Mesozoic age. The simple cross‐cutting relationships and other outcrop features of the area indicate that the carbonate rocks are an intrusive phase and younger than the other surrounding Mesozoic rocks. The Ulsan carbonates have low concentrations of rare earth elements (REE) and trace elements with the carbon and oxygen isotope values in the range of δ¹³C_PDB = 2.4 to 4.0‰ and δ¹⁸O_SMOW = 17.0 to 19.5‰. Outcrop evidence and geochemical signatures indicate that the Ulsan carbonates were formed from crustal carbonate melts, which were generated by the melting/fluxing of crustal carbonate materials, caused by the emplacement‐related processes of alkaline A‐type granitic rocks. Compared to typical mantle‐derived carbonatites associated with silica‐undersaturated, strongly peralkaline systems, the relatively small size and geochemical characteristics of the Ulsan carbonates reflect carbonatite genesis in a silica‐saturated, weakly alkali intrusive system. Major deep‐seated tectonic fractures formed by the collapse of the cauldron or the rift system associated with the opening of the East Sea (Japan Sea) might have facilitated the ascent of the crustal carbonate melts.     

0．7Ma以来的念青唐古拉山脉隆升过程——来自冰川剥蚀作用的证据

通过对念青唐古拉山冰碛地层划分及冰碛物同位素测年，发现最早一期冰碛物形成于0．7～0．6MaBP，指示自中更新世以来念青唐古拉山脉开始隆升，主峰地区发生了大规模的冰川剥蚀作用，形成了大面积分布的冰碛高平台；0．2～0．14MaBP念青唐古拉山又快速隆升，并堆积了刚刚伸出各大沟谷口的高侧碛；0．07～0．03MaBP念青唐古拉山再次小规模隆起，形成各大沟谷内的侧碛和终碛垄；0．01Ma BP还有小规模冰川活动。念青唐古拉山主峰地区的冰川剥蚀作用反映出的山脉隆升过程，可较好地与青藏高原的隆起过程相对比，它应是青藏高原隆升的响应。     

基于ArcView的专题地图的制作

本文探讨了在ArcView环境下专题地图的制作工艺方法和ArcView在制图中的相关应用。     

黑土的水土流失及其保育治理

黑土因其肥沃而闻名，但其退化和水土流失问题往往易被忽略。虽然在人类影响下的现代环境过程开始较晚，但黑土区的环境已发生了较大的变化。对黑土水土流失的现状进行了评价，指出了黑土保育治理的必要性与紧迫性，提出了治理保育措施。     

Petrology, geochemistry and isotopic ages of eclogites from the Dulan UHPM Terrane, the North Qaidam, NW China

The Dulan eclogite–gneiss region is located in the eastern part of the North Qaidam eclogite belt, NW China. Widespread evidence demonstrates that this region is a typical ultrahigh-pressure (UHP) metamorphic terrane. Eclogites occur as lenses or layers in both granitic and pelitic gneisses. Two distinguished sub-belts can be recognized and differ in mineralogy, petrology and geochemistry. The North Dulan Belt (NDB) has tholeiitic protoliths with high TiO₂ and lower Al₂O₃ and MgO contents. REE patterns and trace element contents resemble those of N-type and E-type MORB. In contrast, eclogites in the South Dulan Belt (SDB) are of island arc protoliths with low TiO₂, high Al₂O₃ and show LREE-enriched and HFSE-depleted patterns. Sm–Nd isotope analyses give isochron ages of 458–497 Ma for eclogite-facies metamorphism for the two sub-belts. The ages are similar to those of Yuka and Altun eclogites in the western extension of the North Qaidam-Altun eclogite belt. The Dulan UHP metamorphic terrane, together with several other recently recognized eclogite-bearing terrenes within the North Qaidam-Altun HP-UHP belt, constitute the key to the understanding of the tectonic evolution of the northern Tibetan Plateau. The entire UHP belt extends for more than 1000 km from the Dulan UHP terrane in the southeast to the Altun eclogite–gneiss terrane in the west. This super-belt marks an early Paleozoic continental collision zone between the Qaidam Massif and the Qilian Massif.     

Geology and Genesis of the Ta'ergou Skarn - Quartz Vein Tungsten Deposit in the North Qilian Caledonian Orogenic Belt, Northwest China

Abstract. The Ta'ergou tungsten deposit in Gansu province, northwestern China, is located in the western part of the North Qilian Caledonian orogen, and consists of scheelite skarn bodies and wolframite quartz veins. The tungsten‐bearing skarn developed by the replacement of carbonate layers intercalated in the Precambrian schist and amphibolite whereas wolframite‐quartz ore veins developed along a group of fractures that cut through horizontal skarns. The Ta'ergou tungsten deposit is genetically related to the Caledonian Yeniutan granodiorite intrusion and occurs ca. 500 m wide in the exo‐contact zone 300 ～ 500 m apart from the intrusion. The granodiorite displays a lower grade of differentiation, low content of SiO₂ and high contents of mafic components. There are three types of fluid inclusions in the wolframite‐quartz vein systems, i. e. aqueous, CO₂‐H₂O and CO₂‐rich. The homogenization temperature of aqueous inclusion ranges from 140 to 380d?C and their salinities from 6.4 to 17.4 equivalent wt% NaCl. Laser Raman spectroscopy shows that the inclusions contain a relatively high content of CO₂. The δ³⁴S values of skarn type sulfides range from +8.1 to +12.7 per mil and those of quartz vein sulfides from +9.3 to +14.9 per mil, similar to sulfides of the granodiorite with from +6.0 to +11.7 per mil. The δ¹⁸O values of quartz are between +10.5 and +13.3 per mil and those of wolframite between +3.4 and +5.1 per mil. The δ¹⁸O water values of ore forming fluids range from +0.6 to +6.4 per mil and suggest the mixture of magmatic fluids with meteoric water formed the ore‐forming fluids. It has been proved that Precambrian strata in the west sector of North Qilian region are enriched in tungsten. We propose the strata were remelted to be tungsten‐granitoid during subduction. The polymetallic tungsten was gradually accumulated into the roof pendants of the granite intrusion by fractional crystallization and then was deposited by hydrothermal fluids during metasomatism and infilling along fractures. On the other hand, the granite intrusion also acted as “heating machine” to make hydrothermal fluids leach out the metals from Precambrian strata and these metals joined the ore‐forming hydrothermal system.     

Flat mantle reflectors in Eastern China: possible evidence of lithospheric thinning

Recent 24 s deep seismic reflection records revealed five flat reflectors in the lithospheric mantle in Eastern China. With increasing depth, they are named M1 to M5 and can be seen on both field single-shot and stacked records. Reflector M1 corresponds to the Moho discontinuity, whereas M5 may be the reflection from the bottom of the current lithosphere, which is about 78 km deep according to geothermal measurements. The other three reflectors seem peculiar and might result from interactions between the lithosphere and deeper mantle. Based on lithological and geochemical data, it is suggested that the lithosphere has been thinned from about 150 km to about 60 km in the Late Mesozoic, and then has been thickened to about 78 km during the Cenozoic. The thinning process produced a granulite layer in the old lower crust caused by magmatic underplating, whereas an eclogite layer formed beneath owing to the subduction of the Paleo-Tethys and Yangtze Craton during the Permian and Early Mesozoic. Reflector M2 at about 12 s two-way traveltime (TWT) might result from the Paleozoic Moho, which represents the boundary between the previous granulite and eclogite facies. Reflector M3 at about 14 s might correspond to the bottom of the eclogite layer, beneath which the old lithospheric mantle remained. The old and the newly developed mantle may have different compositions, resulting in reflector M4. The multi-layered mantle reflectors demonstrate a mantle structure that possibly correlates with the lithospheric thinning process that occurred in Eastern China during the Late Mesozoic. The discovery of multi-layered mantle reflectors in the studied areas indicates a high heterogeneity of the upper mantle. Reflection seismology with improved technology, together with velocity and resistivity imaging and rock-physics measurements, can provide more details of the heterogeneity and related dynamic processes that occurred in the lithospheric mantle.