滇中地区铝土矿床地质特征及成矿规律

通过对滇中地区典型铝土矿(老煤山铝土矿)成矿地质特征研究, 认为该区铝土矿为古风化壳沉积型铝土矿, 主要受地层层位、岩性古地理条件、褶皱构造及后期抬升改造影响。研究认为该区具有一定勘探潜力。     

柿庄南区块煤层气井早期生产特征及开采建议

从水文地质的角度揭示了不同情况下单井的排水采气机理。在此基础上结合柿庄南区块59口井的实际排采数据,综合分析了气水产量,井底流压,套压及动液面随时间的变化曲线;并将早期生产特征归纳为3种类型：①低产水-高产气型,见气早,产气量高（>1000 m3/d）、产量递减缓慢、峰值产量高,日产水量小（<2m3/d）,套压高;②低产水-中低产气型,日产气小于1000 m3,产量衰减明显且波动大,排水期较长;③高产水型,产气极少或无,日产水量大（>10m3/d）,动液面下降缓慢,套压很低或为零。最后针对不同类型的低产井,提出相应的开采建议：低产水-低产气型井可采用二次压裂措施,改善煤层渗透率;高产水井可通过无机堵水或加大排采强度等方式排采;煤层气井排采要勇于实践,探索适合该区不同煤层的成功排采方法。     

非饱和黄土土-水特征曲线与渗透系数Childs & Collis-Geroge模型预测

我国黄土厚度大,黄土地区地下水位深,降雨量少,黄土多处于非饱和状态,土-水特征曲线是非饱和黄土应力状态、强度及渗透性研究的基础。以陇东高原马兰黄土为试验对象,采用张力计法测定原状土样的土-水特征曲线,采用三种理论模型对试验数据拟合,其中Gardner模型简单、参数少,但Fredlund & Xing模型拟合效果最好。基于已测得的土-水特征曲线,采用Childs & Collis-Geroge预测非饱和渗透系数的模型,计算得到非饱和黄土渗透系数与基质吸力或含水率的关系,发现黄土从饱和到非饱和,其渗透系数急剧降低,黄土非饱和渗透系数与基质吸力或体积含水率的关系均可用指数函数表示。本文对典型黄土土-水特征曲线的研究及渗透性的预测为黄土工程问题,如降雨入渗的边坡稳定性评价、非饱和地基湿陷变形计算等提供理论基础。     

http://www.sciencedirect.com/science/article/pii/S1674987112000266

Major,trace and rare earth element(REE) concentrations of Late Triassic sediments(finegrained sandstones and mudstones) from Hongcan Well 1 in the NE part of the Songpan-Ganzi Basin, western China,are used to reveal weathering,provenance and tectonic setting of inferred source areas. The Chemical Index of Alteration(CIA) reflects a low to moderate degree of chemical weathering in a cool and somewhat dry climate,and an A-CN-K plot suggests an older upper continental crust provenance dominated by felsic to intermediate igneous rocks of average tonalite composition.Based on the various geochemical tectonic setting discrimination diagrams,the Late Triassic sediments are inferred to have been deposited in a back-arc basin situated between an active continental margin(the Kunlun-Qinling Fold Belt) and a continental island arc(the Yidun Island Arc).The Triassic sediments in the study area underwent a rapid erosion and burial in a proximal slope-basin environment by the petrographic data. while the published flow directions of Triassic lurbidites in the Aba-Zoige region was not supported Yidun volcanic arc source.Therefore,we suggest that the Kunlun-Qinling tcrrane is most likely to have supplied source materials to the northeast part of the Songpan-Ganzi Basin during the Late Triassic.     

川东北地区普光2井飞仙关组储层沥青地球化学特征及成因分析

根据储层中沥青的产状及类型、族组成、饱和烃色谱、生物标志化合物以及储层沥青反射率等,对普光2井飞仙关组储层固体沥青的地球化学特征及成因进行了详尽的剖析。研究结果表明,普光2井飞仙关组储层沥青为古油藏原油经裂解成气之后的残留物,属热演化的焦沥青。储层沥青的正构烷烃分布较为完整,碳数在C14~C30范围,没有受到明显的生物降解作用。Pr/Ph、Pr/nC17和Ph/nC18比值都小于1.0;OEP值1.25～1.43,CPI值0.98～1.19,无奇偶优势或偶奇优势;规则甾烷系列中C27化合物含量占优势,C27-C29规则甾烷呈不对称的“V”字型分布,甾烷异构化程度较低,明显低于异构化平衡值,认为是由于高、过成熟阶段S构型比R构型裂解速率更快的结果。飞一段、飞二段孕甾烷、升孕甾烷含量明显较飞三段高,可能是有机质生源或沉积环境性质上的不同所致。萜类化合物以五环萜烷为主,三环萜烷较为发育,其以C23三环萜烷为基峰,伽马蜡烷的含量较高。这些特征表明普光2井储层沥青主要来源于低等水生生物,有机质的热演化程度较高,主要处于高-过成熟阶段,有机母质形成于沉积水体咸度较高的海相沉积环境中。储层沥青中高含量25 降藿烷并非生物降解作用所致,而主要与源岩的热演化程度较高有关。     

GCTS空心圆柱扭剪仪反压饱和试验探究

GCTS空心圆柱扭剪仪是研究土体在循环荷载下的主应力轴旋转的理想仪器。如何使用GCTS空心圆柱扭剪仪对软土空心试样进行反压饱和才能使后续试验结果更精确,探究了以GCTS空心圆柱扭剪仪为试验平台,对空心试样进行了反压饱和的试验方法。总结了空心扭剪仪反压饱和的3种加压方式：手动加压、自动加压和连续加压方式。通过一些试验探究了每种加压方式所对应的合理性参数。确定了适合吹填土的压差为15kPa。确定了孔压稳定的标准为：如果孔压在1min内的变化值小于围压和反压之间压力差的5％,则认为孔压稳定。     

内蒙古拜仁达坝-维拉斯托银多金属矿床的矿相学特征

拜仁达坝和维拉斯托是近年来在内蒙古东部地区发现的2个大型银多金属矿床。文章通过岩相学、BSE图像与电镜能谱等手段对其矿相学特征进行了系统研究。笔者结合矿床地质特征,厘清了2个矿区金属矿物的种类、产出状态及生成顺序,共确定3期4个阶段的矿化作用。第1期成矿作用主要形成胶状黄铁矿,代表低温热（水）的沉积环境。第2期成矿作用是一次中高温热液成矿作用,以高温矿物毒砂与锡石为标志,形成As-S金属硫化物矿化：黄铁矿+闪锌矿+方铅矿+磁黄铁矿+黄铜矿+毒砂+锡石,随后经历了强烈的构造破碎和强烈的糜棱岩化,形成了一系列具有脆性变形-角砾状和塑性变形-糜棱状结构构造特征的矿石类型。第3期成矿作用包括2个成矿阶段：第1阶段为中高温热液成矿阶段,形成一系列富S的金属矿化和Bi+Ag的金属硫化物：毒砂→黄铁矿→自然Bi+硫银铋矿→方铅矿+磁黄铁矿+闪锌矿+黄铜矿等;第2阶段为中-低温热液活动,形成一系列贫S富Sb+Ag的金属硫化物：磁黄铁矿+方铅矿+闪锌矿→纤硫锑铅矿+银黝铜矿→六方锑银矿+锑银矿→自然银。其中铅锌矿化与第2、3期成矿作用有关,而银矿化主要与第3期成矿作用的第4阶段有关。     

Data Analysis of Chang’E-1 Gamma-Ray Spectrometer and Global Distribution of U, K, and Th Elemental Abundances

Gamma-ray spectrometer (GRS) is one of the main payloads on the Chang’E-1 (CE-1) lunar probe, mainly aimed to detect the elemental abundances and distributions on the lunar surface. At 03:58 on 28 November 2007, it performed the first observation of the lunar gamma rays. As of 24 October 2008, 2105?h of effective gamma rays spectra had been acquired by CE-1 GRS, which covers the whole surface of the moon. This paper mainly describes the data processing procedures and methods of deriving the elemental abundances by using the CE-1 GRS time series corrected spectra: first, to bin data into pixels for mapping; then, to perform a background deduction of the cumulative spectra and obtain a peak area of the elements; and finally, to use the elemental abundances inversion model to produce the elemental abundances. Based on these processing methods, the global abundance maps of U, K, and Th at a 5°×5° equal-area pixel are acquired by CE-1 GRS data. The paper gives a preliminary analysis of the uncertainties of the elemental abundances     

判定现今局部应力方向的一种新方法

区域应力与局部应力方向存在差异,不能简单地把区域应力方向当作局部构造应力方向。根据力学分解特征,提出了用区域主应力方向沿构造等高线进行分解以求取局部应力方向的方法。根据北部湾盆地内目的层的构造等高线,用该方法求得S1井目的层的局部应力方向为NNW-SSE向和SWW-NEE向。该应力方向与S1井成像测井分析求得的局部应力方向完全吻合,从而说明本文提出的新方法具有可行性,可以在该区域内推广。     

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.