Steady flow to a partially penetrating blind‐wall well in a confined aquifer

Wells in aquifers of loose collapsible sediment are cased so that they have a blind wall and gain water only from the bottom. The hydraulic gradient established at the bottom of these wells during pumping brings the aquifer materials in a quicksand state, which may cause abrasion of pipes and pumps and even the destruction of well structure. To examine the quicksand occurrence, an analytical solution for the steady flow to a partially penetrating blind‐wall well in a confined aquifer is developed. The validity of the proposed solution is evaluated numerically. The sensitivity of maximum vertical gradient along the well bottom in response to aquifer and well parameters is examined. The solution is presented in the form of dimensionless‐type curves and equations that can be easily used to design the safe pumping rate and optimum well geometry to protect the well against sand production. The solution incorporates the anisotropy of aquifer materials and can also be used to determine the hydraulic conductivity of the aquifer. Copyright © 2012 John Wiley & Sons, Ltd.     

Radionuclide Transport Behavior in a Generic Geological Radioactive Waste Repository

We performed numerical simulations of groundwater flow and radionuclide transport to study the influence of several factors, including the ambient hydraulic gradient, groundwater pressure anomalies, and the properties of the excavation damaged zone (EDZ), on the prevailing transport mechanism (i.e., advection or molecular diffusion) in a generic nuclear waste repository within a clay‐rich geological formation. By comparing simulation results, we show that the EDZ plays a major role as a preferential flowpath for radionuclide transport. When the EDZ is not taken into account, transport is dominated by molecular diffusion in almost the totality of the simulated domain, and transport velocity is about 40% slower. Modeling results also show that a reduction in hydraulic gradient leads to a greater predominance of diffusive transport, slowing down radionuclide transport by about 30% with respect to a scenario assuming a unit gradient. In addition, inward flow caused by negative pressure anomalies in the clay‐rich formation further reduces transport velocity, enhancing the ability of the geological barrier to contain the radioactive waste. On the other hand, local high gradients associated with positive pressure anomalies can speed up radionuclide transport with respect to steady‐state flow systems having the same regional hydraulic gradients. Transport behavior was also found to be sensitive to both geometrical and hydrogeological parameters of the EDZ. Results from this work can provide useful knowledge toward correctly assessing the post‐closure safety of a geological disposal system.     

Nonlinear seismic analysis of reinforced concrete frames using the force analogy method

A method of nonlinear seismic analysis for RC framed structures considering full‐range factors, including stiffness and strength degradation, geometric nonlinearity, and structural member failure, is established based on the fundamental concept of the force analogy method. The strong material nonlinearity, large geometric deformation, and internal forces redistribution due to the member failure can be depicted by the proposed local plastic mechanisms, the rotation hinges at the member ends and the slide hinges assigned to the columns, of which the measurement relationships are moment versus plastic rotation and shear force versus shear plastic deformation, respectively. They are capable of evaluating the exact response of RC structures. Because only unchanging initial stiffness matrices are used through the whole computation process, the state‐space formulation was used for solving the equations of motion. The advantages of the force analogy method, such as high efficiency and stability, are still retained. The exactness of the proposed local plastic mechanisms is verified against a group of tests data, and the application of the proposed procedure is performed to an RC framed structure to simulate the full‐range nonlinear response by increasing the excitation step by step until failure of partial structural members appear. Copyright © 2014 John Wiley & Sons, Ltd.     

An Adaptive Method of High Accuracy Surface Modeling and Its Application to Simulating Elevation Surfaces

An adaptive method is employed to speed up computation of high accuracy surface modeling (HASM), for which an error indicator and an error estimator are developed. Root mean‐square error (RMSE) is used as the error estimator that is formulated as a function of gully density and grid cell size. The error indicator is developed on the basis of error surfaces for different spatial resolutions, which are interpolated in terms of the absolute errors calculated at sampled points while paying attention to the landform characteristics. The error surfaces indicate the magnitude and distribution of errors in each step of adaptive refinement and make spatial changes to the errors in the simulation process visualized. The adaptive method of high accuracy surface modeling (HASM‐AM) is applied to simulating elevation surface of the Dong‐Zhi tableland with 27.24 million pixels at a spatial resolution of 10 m × 10 m. Test results show that HASM‐AM has greatly speeded up computation by avoiding unnecessary calculations and saving memory. In addition, HASM‐AM improves simulation accuracy.     

West versus East Mediterranean Sea: origin and genetic differentiation of the sea cucumber Holothuria polii

We studied the genetic structure of the sea cucumber Holothuria (Roweothuria) polii (Delle Chiaje 1823) by analysing the mitochondrial DNA variation in two fragments of cytochrome oxidase I (COI) and 16S genes. Individuals were collected in seven locations along the Mediterranean Sea, which cover a wide range of the species distribution. We found high haplotype diversity for COI and moderate diversity for 16S, and low nucleotide diversity for both genes. Our results for the COI gene showed many recent and exclusive haplotypes with few mutational changes, suggesting recent or ongoing population expansion. The Western and Eastern Mediterranean populations exhibited slight but significant genetic differentiation (COI gene) with higher genetic diversity in the East. The most ancient haplotype was not present in the westernmost sampling location (SE Spain). The oldest expansion time was observed in Turkey, corresponding to mid‐Pleistocene. Turkey had also the highest genetic diversity (number of total and exclusive haplotypes, polymorphisms, haplotype and nucleotide diversity). This suggests that this region could be the origin of the subsequent colonizations through the Mediterranean Sea, a hypothesis that should be assessed with nuclear markers in future research.     

Lateral velocity variation related correction in asymptotic true‐amplitude one‐way propagators

It was mathematically proved that the asymptotic true‐amplitude one‐way wave equation could provide the same amplitude as the full‐wave equation in heterogeneous lossless media in the sense of high‐frequency asymptotics. Much work has been done on the vertical velocity variation related amplitude correction term but the lateral velocity variation related term has not received much attention, even being excluded in some asymptotic true‐amplitude one‐way propagator formulations. Here we analyse the effects of different amplitude correction terms in the asymptotic true‐amplitude one‐way propagator, especially the effect related to the lateral velocity variation, by comparing the wavefield amplitude from the one‐way propagator with that from full‐wave modelling. We derive a dual‐domain wide‐angle screen type asymptotic true‐amplitude one‐way propagator and evaluate two implementations of the amplitude correction. Numerical examples show that the lateral velocity variation related correction term can play a significant role in the asymptotic true‐amplitude one‐way propagator. Optimization of the expansion coefficients in the asymptotic true‐amplitude one‐way propagator can improve both the amplitude and phase accuracy for wide‐angle waves.     

Phase equilibria constraints on melting of stromatic migmatites from Ronda (S. Spain): insights on the formation of peritectic garnet

Stromatic metatexites occurring structurally below the contact with the Ronda peridotite (Ojén nappe, Betic Cordillera, S Spain) are characterized by the mineral assemblage Qtz+Pl+Kfs+Bt+Sil+Grt+Ap+Gr+Ilm. Garnet occurs in low modal amount (2–5 vol.%). Very rare muscovite is present as armoured inclusions, indicating prograde exhaustion. Microstructural evidence of melting in the migmatites includes pseudomorphs after melt films and nanogranite and glassy inclusions hosted in garnet cores. The latter microstructure demonstrates that garnet crystallized in the presence of melt. Re‐melted nanogranites and preserved glassy inclusions show leucogranitic compositions. Phase equilibria modelling of the stromatic migmatite in the MnO–Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂–O₂–C (MnNCaKFMASHOC) system with graphite‐saturated fluid shows P–T conditions of equilibration of 4.5–5 kbar, 660–700 °C. These results are consistent with the complete experimental re‐melting of nanogranites at 700 °C and indicate that nanogranites represent the anatectic melt generated immediately after entering supersolidus conditions. The P–T estimate for garnet and melt development does not, however, overlap with the low‐temperature tip of the pure melt field in the phase diagram calculated for the composition of preserved glassy inclusions in garnet in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O (NCKFMASH) system. A comparison of measured melt compositions formed immediately beyond the solidus with results of phase equilibria modelling points to the systematic underestimation of FeO, MgO and CaO in the calculated melt. These discrepancies are present also when calculated melts are compared with low‐T natural and experimental melts from the literature. Under such conditions, the available melt model does not perform well. Given the presence of melt inclusions in garnet cores and the P–T estimates for their formation, we argue that small amounts (<5 vol.%) of peritectic garnet may grow at low temperatures (≤700 °C), as a result of continuous melting reactions consuming biotite.     

China and the changing economic geography of coffee value chains

For the past three centuries, the economic geography of the global coffee sector has been characterized by the supply of beans from tropical countries for consumption in North America and Europe, with various modes of value chain coordination enacted by lead firms to ensure reliable and affordable supply. This pattern is now fundamentally changing, with growth in coffee consumption in emerging markets, including China, exceeding that in established markets. But China is not only a growing consumer market, it is less well known that rapidly increasing agricultural production in Yunnan province of southwest China has also inserted the country as an important source region for coffee, and this has been pivotal in facilitating the emergence of Chinese lead firms in the sector. This article presents the emergence of China, and Chinese firms, at a critical juncture for the structure and governance of the global value chain for coffee. The processes through which this is occurring are outlined, and the implications for regional development prospects across Southeast Asia are discussed. We argue that the changing economic geography of coffee value chains, and their increasing driven‐ness by Chinese actors, is starting to reshape the regional coffee industry in profoundly new ways.     

Dynamics of grains falling on a sloping granular medium: application to the evolution of a talus

Numerous field surveys have provided quantitative information on the characteristics of talus deposits. Much less has been done to quantify the basic dynamics processes of blocks involved in talus evolution. In this work, we perform a set of experiments at the reduced scale of some metres using an inclined board covered with a loose granular medium. The complexity of the processes forming a talus is simplified by studying the interaction of only two kinds of grain sizes at a time. Grains of one class size are dropped from a fixed height onto the board covered by a layer of grains of a different class size, and their final distribution is recorded. We find that when small grains fall on large grains, the granular abundance decreases rapidly as a function of the distance from the fall point, which is explained by the effect of multiple bouncing on the irregular surface. In contrast, large grains falling on a bed of smaller grains lose much more energy at impact. They may stop at once, or roll down slope, often reaching the whole board length; as a consequence, their abundance peaks in the fall zone and at the change of slope. Experiments also show that grains travel longer with increasing fall height and sloping angle. The results clarify in a physical manner one mechanism that might explain why large blocks are typically found in the distal part of a talus slope, while smaller blocks remain near the fall zone. Based on these and previous experiments, a schematic view of talus evolution is discussed. Copyright © 2014 John Wiley & Sons, Ltd.